[PATCH V2] ARM: imx: add i.MX7ULP cpuidle support
From: Anson Huang
Date: Fri Jan 11 2019 - 01:02:07 EST
This patch adds cpuidle support for i.MX7ULP, 3 cpuidle
states supported as below:
1. WFI, just ARM wfi;
2. WAIT mode, mapped to SoC's partial stop mode #3;
3. STOP mode, mapped to SoC's partial stop mode #1.
In WAIT mode, system clock and bus clock will be enabled;
In STOP mode, system clock and bus clock will be disabled.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
ChangeLog Since V1:
- add prefix for power mode name;
- use tab instead of spaces, sorry for this stupid mistake.
---
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/common.h | 10 +++++++
arch/arm/mach-imx/cpuidle-imx7ulp.c | 60 +++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/cpuidle.h | 5 ++++
arch/arm/mach-imx/mach-imx7ulp.c | 7 +++++
arch/arm/mach-imx/pm-imx7ulp.c | 49 ++++++++++++++++++++++++++----
6 files changed, 127 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/mach-imx/cpuidle-imx7ulp.c
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8af2f7e..12aa44a 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sx.o
obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o
obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o
+obj-$(CONFIG_SOC_IMX7ULP) += cpuidle-imx7ulp.o
endif
ifdef CONFIG_SND_IMX_SOC
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index bc915e5..c51764a 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -72,6 +72,15 @@ enum mxc_cpu_pwr_mode {
STOP_POWER_OFF, /* STOP + SRPG */
};
+enum ulp_cpu_pwr_mode {
+ ULP_PM_HSRUN, /* High speed run mode */
+ ULP_PM_RUN, /* Run mode */
+ ULP_PM_WAIT, /* Wait mode */
+ ULP_PM_STOP, /* Stop mode */
+ ULP_PM_VLPS, /* Very low power stop mode */
+ ULP_PM_VLLS, /* very low leakage stop mode */
+};
+
void imx_enable_cpu(int cpu, bool enable);
void imx_set_cpu_jump(int cpu, void *jump_addr);
u32 imx_get_cpu_arg(int cpu);
@@ -98,6 +107,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode);
void imx6_set_int_mem_clk_lpm(bool enable);
void imx6sl_set_wait_clk(bool enter);
int imx_mmdc_get_ddr_type(void);
+int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode);
void imx_cpu_die(unsigned int cpu);
int imx_cpu_kill(unsigned int cpu);
diff --git a/arch/arm/mach-imx/cpuidle-imx7ulp.c b/arch/arm/mach-imx/cpuidle-imx7ulp.c
new file mode 100644
index 0000000..ca86c96
--- /dev/null
+++ b/arch/arm/mach-imx/cpuidle-imx7ulp.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ * Anson Huang <Anson.Huang@xxxxxxx>
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <asm/cpuidle.h>
+
+#include "common.h"
+#include "cpuidle.h"
+
+static int imx7ulp_enter_wait(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int index)
+{
+ if (index == 1)
+ imx7ulp_set_lpm(ULP_PM_WAIT);
+ else
+ imx7ulp_set_lpm(ULP_PM_STOP);
+
+ cpu_do_idle();
+
+ imx7ulp_set_lpm(ULP_PM_RUN);
+
+ return index;
+}
+
+static struct cpuidle_driver imx7ulp_cpuidle_driver = {
+ .name = "imx7ulp_cpuidle",
+ .owner = THIS_MODULE,
+ .states = {
+ /* WFI */
+ ARM_CPUIDLE_WFI_STATE,
+ /* WAIT */
+ {
+ .exit_latency = 50,
+ .target_residency = 75,
+ .enter = imx7ulp_enter_wait,
+ .name = "WAIT",
+ .desc = "PSTOP2",
+ },
+ /* STOP */
+ {
+ .exit_latency = 100,
+ .target_residency = 150,
+ .enter = imx7ulp_enter_wait,
+ .name = "STOP",
+ .desc = "PSTOP1",
+ },
+ },
+ .state_count = 3,
+ .safe_state_index = 0,
+};
+
+int __init imx7ulp_cpuidle_init(void)
+{
+ return cpuidle_register(&imx7ulp_cpuidle_driver, NULL);
+}
diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h
index f914012..7694c8f 100644
--- a/arch/arm/mach-imx/cpuidle.h
+++ b/arch/arm/mach-imx/cpuidle.h
@@ -15,6 +15,7 @@ extern int imx5_cpuidle_init(void);
extern int imx6q_cpuidle_init(void);
extern int imx6sl_cpuidle_init(void);
extern int imx6sx_cpuidle_init(void);
+extern int imx7ulp_cpuidle_init(void);
#else
static inline int imx5_cpuidle_init(void)
{
@@ -32,4 +33,8 @@ static inline int imx6sx_cpuidle_init(void)
{
return 0;
}
+static inline int imx7ulp_cpuidle_init(void)
+{
+ return 0;
+}
#endif
diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c
index 16b295b..11ac71a 100644
--- a/arch/arm/mach-imx/mach-imx7ulp.c
+++ b/arch/arm/mach-imx/mach-imx7ulp.c
@@ -12,6 +12,7 @@
#include <asm/mach/arch.h>
#include "common.h"
+#include "cpuidle.h"
#include "hardware.h"
#define SIM_JTAG_ID_REG 0x8c
@@ -64,7 +65,13 @@ static const char *const imx7ulp_dt_compat[] __initconst = {
NULL,
};
+static void __init imx7ulp_init_late(void)
+{
+ imx7ulp_cpuidle_init();
+}
+
DT_MACHINE_START(IMX7ulp, "Freescale i.MX7ULP (Device Tree)")
.init_machine = imx7ulp_init_machine,
.dt_compat = imx7ulp_dt_compat,
+ .init_late = imx7ulp_init_late,
MACHINE_END
diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c
index cf6a380..7b2f738 100644
--- a/arch/arm/mach-imx/pm-imx7ulp.c
+++ b/arch/arm/mach-imx/pm-imx7ulp.c
@@ -9,21 +9,60 @@
#include <linux/of.h>
#include <linux/of_address.h>
+#include "common.h"
+
#define SMC_PMCTRL 0x10
#define BP_PMCTRL_PSTOPO 16
#define PSTOPO_PSTOP3 0x3
+#define PSTOPO_PSTOP2 0x2
+#define PSTOPO_PSTOP1 0x1
+#define BP_PMCTRL_RUNM 8
+#define RUNM_RUN 0
+#define BP_PMCTRL_STOPM 0
+#define STOPM_STOP 0
+
+#define BM_PMCTRL_PSTOPO (3 << BP_PMCTRL_PSTOPO)
+#define BM_PMCTRL_RUNM (3 << BP_PMCTRL_RUNM)
+#define BM_PMCTRL_STOPM (7 << BP_PMCTRL_STOPM)
+
+static void __iomem *smc1_base;
+
+int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode)
+{
+ u32 val = readl_relaxed(smc1_base + SMC_PMCTRL);
+
+ /* clear all */
+ val &= ~(BM_PMCTRL_RUNM | BM_PMCTRL_STOPM | BM_PMCTRL_PSTOPO);
+
+ switch (mode) {
+ case ULP_PM_RUN:
+ /* system/bus clock enabled */
+ val |= PSTOPO_PSTOP3 << BP_PMCTRL_PSTOPO;
+ break;
+ case ULP_PM_WAIT:
+ /* system clock disabled, bus clock enabled */
+ val |= PSTOPO_PSTOP2 << BP_PMCTRL_PSTOPO;
+ break;
+ case ULP_PM_STOP:
+ /* system/bus clock disabled */
+ val |= PSTOPO_PSTOP1 << BP_PMCTRL_PSTOPO;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ writel_relaxed(val, smc1_base + SMC_PMCTRL);
+
+ return 0;
+}
void __init imx7ulp_pm_init(void)
{
struct device_node *np;
- void __iomem *smc1_base;
np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1");
smc1_base = of_iomap(np, 0);
WARN_ON(!smc1_base);
- /* Partial Stop mode 3 with system/bus clock enabled */
- writel_relaxed(PSTOPO_PSTOP3 << BP_PMCTRL_PSTOPO,
- smc1_base + SMC_PMCTRL);
- iounmap(smc1_base);
+ imx7ulp_set_lpm(ULP_PM_RUN);
}
--
2.7.4