Re: [PATCH] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator warning

[Kevin Hilman]

Anand Moon <linux.amoon@xxxxxxxxx> writes:

> Hi Neil,
>
> On Fri, 11 Jan 2019 at 19:10, Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
>>
>> Hi Anand,
>>
>> On 11/01/2019 10:22, Anand Moon wrote:
>> > Add missing vin-supply 5V regulator node on usb_phy nodes needed
>> > to power usb bus ports. Override the dr_mode from "host" to "peripheral"
>> > for initialization of dwc2 usb0 phy node,changes fix the below
>> > warning for usb initialization.
>>
>> I would have switch the dr_mode to peripheral in another patch,
>> fix the regulator issue in this patch only.
>>
>> Neil
>>
> [snip]
>
> Ok will split this into two patches and send after next dts updates.
>

When you split, please be specific about which part fixes which
problem.  e.g. it appears the dr_mode fixes the WARNING from the
regulator core by itself, and the vin-supply fixes the usb resets,
correct?  It wasn't obvious upon reading the changelog.

In either case, feel free to add:

Tested-by: Kevin Hilman <khilman@xxxxxxxxxxxx>

I tested on meson-gxbb-odroidc2 and it looks good.

Thanks for fixing this,

Kevin