[PATCH v3 1/3] iio: ti-ads124s08: Add DT binding documentation

[Dan Murphy]

Adding binding documentation for Texas Instruments ADS124S08
and ADS124S06 ADC.

S08 is a 12 channel ADC
S06 is a 6 channel ADC

Datesheet can be found here:
http://www.ti.com/lit/gpn/ads124s08

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---

v3 - Fixed the compatible made the colon spacing consistent - https://lore.kernel.org/patchwork/patch/1023969/
v2 - Fixed incorrect compatible example and removed vref-supply - https://lore.kernel.org/patchwork/patch/1021047/

 .../bindings/iio/adc/ti-ads124s08.txt         | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt

diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt
new file mode 100644
index 000000000000..ecf807bb32f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt
@@ -0,0 +1,25 @@
+* Texas Instruments' ads124s08 and ads124s06 ADC chip
+
+Required properties:
+ - compatible :
+	"ti,ads124s08"
+	"ti,ads124s06"
+ - reg : spi chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency : Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+ - spi-cpha : Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+ - reset-gpios : GPIO pin used to reset the device.
+
+Example:
+adc@0 {
+	compatible = "ti,ads124s08";
+	reg = <0>;
+	spi-max-frequency = <1000000>;
+	spi-cpha;
+	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+};
-- 
2.20.1.98.gecbdaf0899