RE: [PATCH 2/2] arm64: dts: lx2160a: add sata node support

[Peng Ma]

>-----Original Message-----
>From: Shawn Guo <shawnguo@xxxxxxxxxx>
>Sent: 2019年1月13日 12:06
>To: Peng Ma <peng.ma@xxxxxxx>
>Cc: axboe@xxxxxxxxx; Leo Li <leoyang.li@xxxxxxx>; robh+dt@xxxxxxxxxx;
>mark.rutland@xxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
>devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
>linux-ide@xxxxxxxxxxxxxxx
>Subject: Re: [PATCH 2/2] arm64: dts: lx2160a: add sata node support
>
>On Thu, Jan 10, 2019 at 06:05:33PM +0800, Peng Ma wrote:
>> Add sata node support and Enable sata support
>>
>> Signed-off-by: Peng Ma <peng.ma@xxxxxxx>
>> ---
>>  arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts |   16 +++++++
>>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi    |   44
>+++++++++++++++++++++
>>  2 files changed, 60 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
>b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
>> index 6481e5f..aacca27 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
>> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
>> @@ -117,3 +117,19 @@
>>  &usb1 {
>>  	status = "okay";
>>  };
>> +
>> +&sata0 {
>> +	status = "okay";
>> +};
>> +
>> +&sata1 {
>> +	status = "okay";
>> +};
>> +
>> +&sata2 {
>> +	status = "okay";
>> +};
>> +
>> +&sata3 {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> index a79f5c1..e857a14 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> @@ -762,5 +762,49 @@
>>  				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
>>  			dma-coherent;
>>  		};
>> +
>> +		sata0: sata@3200000 {
>> +			status = "disabled";
>
>We usually have 'status' at the end of property list.
>
>Shawn
[Peng Ma] 
Ok, got it, thanks yure quick reply.
Regards,
Peng
>
>> +			compatible = "fsl,lx2160a-ahci";
>> +			reg = <0x0 0x3200000 0x0 0x10000>,
>> +			      <0x7 0x100520 0x0 0x4>;
>> +			reg-names = "ahci", "sata-ecc";
>> +			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clockgen 4 3>;
>> +			dma-coherent;
>> +		};
>> +
>> +		sata1: sata@3210000 {
>> +			status = "disabled";
>> +			compatible = "fsl,lx2160a-ahci";
>> +			reg = <0x0 0x3210000 0x0 0x10000>,
>> +			      <0x7 0x100520 0x0 0x4>;
>> +			reg-names = "ahci", "sata-ecc";
>> +			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clockgen 4 3>;
>> +			dma-coherent;
>> +		};
>> +
>> +		sata2: sata@3220000 {
>> +			status = "disabled";
>> +			compatible = "fsl,lx2160a-ahci";
>> +			reg = <0x0 0x3220000 0x0 0x10000>,
>> +			      <0x7 0x100520 0x0 0x4>;
>> +			reg-names = "ahci", "sata-ecc";
>> +			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clockgen 4 3>;
>> +			dma-coherent;
>> +		};
>> +
>> +		sata3: sata@3230000 {
>> +			status = "disabled";
>> +			compatible = "fsl,lx2160a-ahci";
>> +			reg = <0x0 0x3230000 0x0 0x10000>,
>> +			      <0x7 0x100520 0x0 0x4>;
>> +			reg-names = "ahci", "sata-ecc";
>> +			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clockgen 4 3>;
>> +			dma-coherent;
>> +		};
>>  	};
>>  };
>> --
>> 1.7.1
>>