Re: [PATCH v3 3/7] drm: meson: Cleanup on drm_display_mode print str

[Neil Armstrong]

Hi Shayenne,

On 10/01/2019 18:16, Shayenne Moura wrote:
> This patch adjust the print string of drm_display_mode object
> to remove drm_mode_object dependency in meson files.
> 
> Signed-off-by: Shayenne Moura <shayenneluzmoura@xxxxxxxxx>

Totally missed this one... please respect MAINTAINERS and CC the linux-amlogic ML otherwise I'll miss it again.

> ---
> Changes in v2:
>   - Use DRM_MODE_FMT/ARG macros (Daniel)
>   - Make the commit message more clear
> 
> Changes in v3:
>   - No changes
> 
>  drivers/gpu/drm/meson/meson_dw_hdmi.c | 12 +++---------
>  1 file changed, 3 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> index d8c5cc34e22e..0b6c29cdd934 100644
> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> @@ -365,7 +365,7 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
>  	unsigned int wr_clk =
>  		readl_relaxed(priv->io_base + _REG(VPU_HDMI_SETTING));
>  
> -	DRM_DEBUG_DRIVER("%d:\"%s\"\n", mode->base.id, mode->name);
> +	DRM_DEBUG_DRIVER("\"%s\"\n", mode->name);
>  
>  	/* Enable clocks */
>  	regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100);
> @@ -555,12 +555,7 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
>  	int vic = drm_match_cea_mode(mode);
>  	enum drm_mode_status status;
>  
> -	DRM_DEBUG_DRIVER("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n",
> -		mode->base.id, mode->name, mode->vrefresh, mode->clock,
> -		mode->hdisplay, mode->hsync_start,
> -		mode->hsync_end, mode->htotal,
> -		mode->vdisplay, mode->vsync_start,
> -		mode->vsync_end, mode->vtotal, mode->type, mode->flags);
> +	DRM_DEBUG_DRIVER("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
>  
>  	/* Check against non-VIC supported modes */
>  	if (!vic) {
> @@ -650,8 +645,7 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_encoder *encoder,
>  	struct meson_drm *priv = dw_hdmi->priv;
>  	int vic = drm_match_cea_mode(mode);
>  
> -	DRM_DEBUG_DRIVER("%d:\"%s\" vic %d\n",
> -			 mode->base.id, mode->name, vic);
> +	DRM_DEBUG_DRIVER("\"%s\" vic %d\n", mode->name, vic);
>  
>  	/* VENC + VENC-DVI Mode setup */
>  	meson_venc_hdmi_mode_set(priv, vic, mode);
> 

Anyway it's ok for me.

Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>

Neil