Re: [PATCH v3 02/14] media: ov7670: split register setting from set_framerate() logic

[Sakari Ailus]

On Tue, Nov 20, 2018 at 11:03:07AM +0100, Lubomir Rintel wrote:
> This will allow us to restore the last set frame rate after the device
> returns from a power off.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> 
> ---
> Changes since v2:
> - This patch was added to the series
> 
>  drivers/media/i2c/ov7670.c | 30 ++++++++++++++----------------
>  1 file changed, 14 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
> index ee2302fbdeee..ead0c360df33 100644
> --- a/drivers/media/i2c/ov7670.c
> +++ b/drivers/media/i2c/ov7670.c
> @@ -810,13 +810,24 @@ static void ov7675_get_framerate(struct v4l2_subdev *sd,
>  			(4 * clkrc);
>  }
>  
> +static int ov7675_apply_framerate(struct v4l2_subdev *sd)
> +{
> +	struct ov7670_info *info = to_state(sd);
> +	int ret;
> +
> +	ret = ov7670_write(sd, REG_CLKRC, info->clkrc);
> +	if (ret < 0)
> +		return ret;
> +
> +	return ov7670_write(sd, REG_DBLV, info->pll_bypass ? DBLV_BYPASS : DBLV_X4);
> +}
> +
>  static int ov7675_set_framerate(struct v4l2_subdev *sd,
>  				 struct v4l2_fract *tpf)
>  {
>  	struct ov7670_info *info = to_state(sd);
>  	u32 clkrc;
>  	int pll_factor;
> -	int ret;
>  
>  	/*
>  	 * The formula is fps = 5/4*pixclk for YUV/RGB and
> @@ -825,19 +836,10 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
>  	 * pixclk = clock_speed / (clkrc + 1) * PLLfactor
>  	 *
>  	 */
> -	if (info->pll_bypass) {
> -		pll_factor = 1;
> -		ret = ov7670_write(sd, REG_DBLV, DBLV_BYPASS);
> -	} else {
> -		pll_factor = PLL_FACTOR;
> -		ret = ov7670_write(sd, REG_DBLV, DBLV_X4);
> -	}
> -	if (ret < 0)
> -		return ret;
> -
>  	if (tpf->numerator == 0 || tpf->denominator == 0) {
>  		clkrc = 0;
>  	} else {
> +		pll_factor = info->pll_bypass ? 1 : PLL_FACTOR;
>  		clkrc = (5 * pll_factor * info->clock_speed * tpf->numerator) /
>  			(4 * tpf->denominator);
>  		if (info->fmt->mbus_code == MEDIA_BUS_FMT_SBGGR8_1X8)
> @@ -859,11 +861,7 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
>  	/* Recalculate frame rate */
>  	ov7675_get_framerate(sd, tpf);
>  
> -	ret = ov7670_write(sd, REG_CLKRC, info->clkrc);
> -	if (ret < 0)
> -		return ret;
> -
> -	return ov7670_write(sd, REG_DBLV, DBLV_X4);
> +	return ov7675_apply_framerate(sd);
>  }
>  
>  static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd,

Unfortunately this one no longer applies due to Jacopo's patch "v4l2: i2c:
ov7670: Fix PLL bypass register values" in my tree. Could you resend it if
you still think it's useful, please?

My tree is here:

<URL:https://git.linuxtv.org/sailus/media_tree.git/log/>

I've applied the rest there, with a trivial patch I'll send briefly.

Thanks.

-- 
Sakari Ailus