Re: [PATCH] arm64: dts: hikey: Give wifi some time after power-on

[Ulf Hansson]

On Tue, 15 Jan 2019 at 09:10, Jan Kiszka <jan.kiszka@xxxxxx> wrote:
>
> On 06.01.19 10:53, Jan Kiszka wrote:
> > On 03.01.19 22:32, Ulf Hansson wrote:
> >> On Wed, 2 Jan 2019 at 23:21, John Stultz <john.stultz@xxxxxxxxxx> wrote:
> >>>
> >>> Adding a few folks to cc from the thread here:
> >>> https://patchwork.kernel.org/patch/10734021/
> >>>
> >>> As this sounds like a very similar issue.
> >>> thanks
> >>> -john
> >>
> >> John, thanks for looping me in.
> >>
> >>>
> >>> On Sun, Dec 30, 2018 at 3:38 AM Jan Kiszka <jan.kiszka@xxxxxx> wrote:
> >>>>
> >>>> From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
> >>>>
> >>>> Somewhere along recent changes to power control of the wl1835, power-on
> >>>> became very unreliable on the hikey, failing like this:
> >>>>
> >>>> wl1271_sdio: probe of mmc2:0001:1 failed with error -16
> >>>> wl1271_sdio: probe of mmc2:0001:2 failed with error -16
> >>>>
> >>>> After playing with some dt parameters and comparing to other users of
> >>>> this chip, it turned out we need some power-on delay to make things
> >>>> stable again. In contrast to those other users which define 200 ms, the
> >>>> hikey is already very happy with 1 ms.
> >>
> >> According to the discussions we had so far, this doesn't sound like
> >> the correct solution.
> >>
> >> I am intending to post patch soon, however, I am not sure exactly what
> >> solution to pick yet. I will keep you on cc - and of course I
> >> appreciate if you could help to test.
> >>
> >
> > FWIW, the Ultra96 is also affected. Here I worked around it by using a 10 ms
> > power-on delay. The original workaround from the other thread did not help.
> > Looking forward to the proper fix now!
> >
>
> Any news on this regression?

I will post a (or two) patch during the day.

Kind regards
Uffe