[PATCH v2 0/2] reset: Add Broadcom STB SW_INIT reset controller driver

[Florian Fainelli]

Hi Philipp,

This patch series adds support for the Broadcom STB reset controller
using SW_INIT-style registers which have one or more banks of 32
reset lines and separate CLEAR/SET/STATUS registers.

Thanks!

Changes in v2:

- utilize SW_INIT_BIT() in status callback
- removed unused members of private structure
- confirmed maximum reset duration with designers
- renamed binding to brcm,brcmstb-reset.txt


Florian Fainelli (2):
  dt-bindings: reset: Add document for Broadcom STB reset controller
  reset: Add Broadcom STB SW_INIT reset controller driver

 .../bindings/reset/brcm,brcmstb-reset.txt     |  27 ++++
 drivers/reset/Kconfig                         |   7 +
 drivers/reset/Makefile                        |   1 +
 drivers/reset/reset-brcmstb.c                 | 130 ++++++++++++++++++
 4 files changed, 165 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
 create mode 100644 drivers/reset/reset-brcmstb.c

-- 
2.17.1