Re: [PATCH v3 2/2] dt-bindings: iio: chemical: Add bindings for bme680

[Himanshu Jha]

On Mon, Jan 14, 2019 at 03:19:14PM -0500, Sebastien Bourdelin wrote:
> BME680 is a pressure/temperature/humidity/voc sensor.
> 
> Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx>
> ---
> v2 -> v3:
>   - change i2c address to 0x76 as it seems more reliable: Suggested by Himanshu Jha <himanshujha199640@xxxxxxxxx>
>   - rebase on master
> ---
>  .../devicetree/bindings/iio/chemical/bme680.txt       | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
> new file mode 100644
> index 000000000000..7f3827cfb2ff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
> @@ -0,0 +1,11 @@
> +Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
> +
> +Required properties:
> +- compatible: must be "bosch,bme680"
> +
> +Example:
> +
> +bme680@76 {
> +          compatible = "bosch,bme680";
> +          reg = <0x76>;
> +};

Thanks,

	Acked-by: Himanshu Jha <himanshujha199640@xxxxxxxxx>

-- 
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology