Re: [PATCH v2 4/4] usb: musb: Add support for MediaTek musb controller
From: Bin Liu
Date: Tue Jan 15 2019 - 15:39:18 EST
Hi Min,
very close, thanks.
Below I tried to explain a further cleanup in musb_clearb/w() and
musb_get/set_toggle() implementation. Please let me know if it is not
clear.
Basically, we don't need musb_default_clearb/w(), just assign the
musb_io function pointers to musb_readb/w().
Then the mtk platform musb_clearb/w() calls musb_readb/w() and
musb_writeb/w() to handle W1C.
On Tue, Jan 15, 2019 at 09:43:46AM +0800, min.guo@xxxxxxxxxxxx wrote:
> From: Min Guo <min.guo@xxxxxxxxxxxx>
>
> This adds support for MediaTek musb controller in
> host, peripheral and otg mode.
> There are some quirk of MediaTek musb controller, such as:
> -W1C interrupt status registers
> -Private data toggle registers
> -No dedicated DMA interrupt line
>
> Signed-off-by: Min Guo <min.guo@xxxxxxxxxxxx>
> Signed-off-by: Yonglong Wu <yonglong.wu@xxxxxxxxxxxx>
> ---
> drivers/usb/musb/Kconfig | 8 +-
> drivers/usb/musb/Makefile | 1 +
> drivers/usb/musb/mediatek.c | 617 +++++++++++++++++++++++++++++++++++++++++++
> drivers/usb/musb/musb_core.c | 69 +++++
> drivers/usb/musb/musb_core.h | 9 +
> drivers/usb/musb/musb_dma.h | 9 +
> drivers/usb/musb/musb_host.c | 26 +-
> drivers/usb/musb/musb_io.h | 6 +
> drivers/usb/musb/musbhsdma.c | 55 ++--
> 9 files changed, 762 insertions(+), 38 deletions(-)
> create mode 100644 drivers/usb/musb/mediatek.c
>
> diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
> index ad08895..b72b7c1 100644
> --- a/drivers/usb/musb/Kconfig
> +++ b/drivers/usb/musb/Kconfig
> @@ -115,6 +115,12 @@ config USB_MUSB_JZ4740
> depends on USB_MUSB_GADGET
> depends on USB_OTG_BLACKLIST_HUB
>
> +config USB_MUSB_MEDIATEK
> + tristate "MediaTek platforms"
> + depends on ARCH_MEDIATEK || COMPILE_TEST
> + depends on NOP_USB_XCEIV
> + depends on GENERIC_PHY
> +
> config USB_MUSB_AM335X_CHILD
> tristate
>
> @@ -141,7 +147,7 @@ config USB_UX500_DMA
>
> config USB_INVENTRA_DMA
> bool 'Inventra'
> - depends on USB_MUSB_OMAP2PLUS
> + depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK
> help
> Enable DMA transfers using Mentor's engine.
>
> diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
> index 3a88c79..63d82d0 100644
> --- a/drivers/usb/musb/Makefile
> +++ b/drivers/usb/musb/Makefile
> @@ -24,6 +24,7 @@ obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
> obj-$(CONFIG_USB_MUSB_UX500) += ux500.o
> obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o
> obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o
> +obj-$(CONFIG_USB_MUSB_MEDIATEK) += mediatek.o
>
>
> obj-$(CONFIG_USB_MUSB_AM335X_CHILD) += musb_am335x.o
> diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c
> new file mode 100644
> index 0000000..7221989
> --- /dev/null
> +++ b/drivers/usb/musb/mediatek.c
> @@ -0,0 +1,617 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 MediaTek Inc.
> + *
> + * Author:
> + * Min Guo <min.guo@xxxxxxxxxxxx>
> + * Yonglong Wu <yonglong.wu@xxxxxxxxxxxx>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/usb_phy_generic.h>
> +#include "musb_core.h"
> +#include "musb_dma.h"
> +
> +#define USB_L1INTS 0x00a0
> +#define USB_L1INTM 0x00a4
> +#define MTK_MUSB_TXFUNCADDR 0x0480
> +
> +/* MediaTek controller toggle enable and status reg */
> +#define MUSB_RXTOG 0x80
> +#define MUSB_RXTOGEN 0x82
> +#define MUSB_TXTOG 0x84
> +#define MUSB_TXTOGEN 0x86
> +
> +#define TX_INT_STATUS BIT(0)
> +#define RX_INT_STATUS BIT(1)
> +#define USBCOM_INT_STATUS BIT(2)
missing a TAB for the alignment?
> +#define DMA_INT_STATUS BIT(3)
> +
> +#define DMA_INTR_STATUS_MSK GENMASK(7, 0)
> +#define DMA_INTR_UNMASK_SET_MSK GENMASK(31, 24)
> +
> +enum mtk_vbus_id_state {
> + MTK_ID_FLOAT = 1,
> + MTK_ID_GROUND,
> + MTK_VBUS_OFF,
> + MTK_VBUS_VALID,
> +};
> +
> +struct mtk_glue {
> + struct device *dev;
> + struct musb *musb;
> + struct platform_device *musb_pdev;
> + struct platform_device *usb_phy;
> + struct phy *phy;
> + struct usb_phy *xceiv;
> + enum phy_mode phy_mode;
> + struct clk *main;
> + struct clk *mcu;
> + struct clk *univpll;
> + struct regulator *vbus;
> + struct extcon_dev *edev;
> + struct notifier_block vbus_nb;
> + struct notifier_block id_nb;
> +};
> +
> +static int mtk_musb_clks_get(struct mtk_glue *glue)
> +{
> + struct device *dev = glue->dev;
> +
> + glue->main = devm_clk_get(dev, "main");
> + if (IS_ERR(glue->main)) {
> + dev_err(dev, "fail to get main clock\n");
> + return PTR_ERR(glue->main);
> + }
> +
> + glue->mcu = devm_clk_get(dev, "mcu");
> + if (IS_ERR(glue->mcu)) {
> + dev_err(dev, "fail to get mcu clock\n");
> + return PTR_ERR(glue->mcu);
> + }
> +
> + glue->univpll = devm_clk_get(dev, "univpll");
> + if (IS_ERR(glue->univpll)) {
> + dev_err(dev, "fail to get univpll clock\n");
> + return PTR_ERR(glue->univpll);
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_musb_clks_enable(struct mtk_glue *glue)
> +{
> + int ret;
> +
> + ret = clk_prepare_enable(glue->main);
> + if (ret) {
> + dev_err(glue->dev, "failed to enable main clock\n");
> + goto err_main_clk;
> + }
> +
> + ret = clk_prepare_enable(glue->mcu);
> + if (ret) {
> + dev_err(glue->dev, "failed to enable mcu clock\n");
> + goto err_mcu_clk;
> + }
> +
> + ret = clk_prepare_enable(glue->univpll);
> + if (ret) {
> + dev_err(glue->dev, "failed to enable univpll clock\n");
> + goto err_univpll_clk;
> + }
> +
> + return 0;
> +
> +err_univpll_clk:
> + clk_disable_unprepare(glue->mcu);
> +err_mcu_clk:
> + clk_disable_unprepare(glue->main);
> +err_main_clk:
> + return ret;
> +}
> +
> +static void mtk_musb_clks_disable(struct mtk_glue *glue)
> +{
> + clk_disable_unprepare(glue->univpll);
> + clk_disable_unprepare(glue->mcu);
> + clk_disable_unprepare(glue->main);
> +}
> +
> +static void mtk_musb_set_vbus(struct musb *musb, int is_on)
> +{
> + struct device *dev = musb->controller;
> + struct mtk_glue *glue = dev_get_drvdata(dev->parent);
> + int ret;
> +
> + /* vbus is optional */
> + if (!glue->vbus)
> + return;
> +
> + dev_dbg(musb->controller, "%s, is_on=%d\r\n", __func__, is_on);
> + if (is_on) {
> + ret = regulator_enable(glue->vbus);
> + if (ret) {
> + dev_err(glue->dev, "fail to enable vbus regulator\n");
> + return;
> + }
> + } else {
> + regulator_disable(glue->vbus);
> + }
> +}
> +
> +/*
> + * switch to host: -> MTK_VBUS_OFF --> MTK_ID_GROUND
> + * switch to device: -> MTK_ID_FLOAT --> MTK_VBUS_VALID
> + */
> +static void mtk_musb_set_mailbox(struct mtk_glue *glue,
> + enum mtk_vbus_id_state status)
add one more TAB for params.
> +{
> + struct musb *musb = glue->musb;
> + u8 devctl = 0;
> +
> + dev_dbg(glue->dev, "mailbox state(%d)\n", status);
> + switch (status) {
> + case MTK_ID_GROUND:
> + phy_power_on(glue->phy);
> + devctl = readb(musb->mregs + MUSB_DEVCTL);
> + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
> + mtk_musb_set_vbus(musb, 1);
> + glue->phy_mode = PHY_MODE_USB_HOST;
> + phy_set_mode(glue->phy, glue->phy_mode);
> + devctl |= MUSB_DEVCTL_SESSION;
> + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
> + MUSB_HST_MODE(musb);
> + break;
> + /*
> + * MTK_ID_FLOAT process is the same as MTK_VBUS_VALID
> + * except that turn off VBUS
> + */
> + case MTK_ID_FLOAT:
> + mtk_musb_set_vbus(musb, 0);
> + /* fall through */
> + case MTK_VBUS_OFF:
> + musb->xceiv->otg->state = OTG_STATE_B_IDLE;
> + devctl &= ~MUSB_DEVCTL_SESSION;
> + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
> + phy_power_off(glue->phy);
> + break;
> + case MTK_VBUS_VALID:
> + phy_power_on(glue->phy);
> + glue->phy_mode = PHY_MODE_USB_DEVICE;
> + phy_set_mode(glue->phy, glue->phy_mode);
> + MUSB_DEV_MODE(musb);
> + break;
> + default:
> + dev_err(glue->dev, "invalid state\n");
> + }
> +}
> +
> +static int mtk_musb_id_notifier(struct notifier_block *nb,
> + unsigned long event, void *ptr)
> +{
> + struct mtk_glue *glue = container_of(nb, struct mtk_glue, id_nb);
> +
> + if (event)
> + mtk_musb_set_mailbox(glue, MTK_ID_GROUND);
> + else
> + mtk_musb_set_mailbox(glue, MTK_ID_FLOAT);
> +
> + return NOTIFY_DONE;
> +}
> +
> +static int mtk_musb_vbus_notifier(struct notifier_block *nb,
> + unsigned long event, void *ptr)
> +{
> + struct mtk_glue *glue = container_of(nb, struct mtk_glue, vbus_nb);
> +
> + if (event)
> + mtk_musb_set_mailbox(glue, MTK_VBUS_VALID);
> + else
> + mtk_musb_set_mailbox(glue, MTK_VBUS_OFF);
> +
> + return NOTIFY_DONE;
> +}
> +
> +static void mtk_otg_switch_init(struct mtk_glue *glue)
> +{
> + int ret;
> +
> + /* extcon is optional */
> + if (!glue->edev)
> + return;
> +
> + glue->vbus_nb.notifier_call = mtk_musb_vbus_notifier;
> + ret = devm_extcon_register_notifier(glue->dev, glue->edev, EXTCON_USB,
> + &glue->vbus_nb);
> + if (ret < 0)
> + dev_err(glue->dev, "failed to register notifier for USB\n");
> +
> + glue->id_nb.notifier_call = mtk_musb_id_notifier;
> + ret = devm_extcon_register_notifier(glue->dev, glue->edev,
> + EXTCON_USB_HOST, &glue->id_nb);
> + if (ret < 0)
> + dev_err(glue->dev, "failed to register notifier for USB-HOST\n");
> +
> + dev_dbg(glue->dev, "EXTCON_USB: %d, EXTCON_USB_HOST: %d\n",
> + extcon_get_state(glue->edev, EXTCON_USB),
> + extcon_get_state(glue->edev, EXTCON_USB_HOST));
> +
> + /* default as host, switch to device mode if needed */
> + if (extcon_get_state(glue->edev, EXTCON_USB_HOST) == false)
> + mtk_musb_set_mailbox(glue, MTK_ID_FLOAT);
> + if (extcon_get_state(glue->edev, EXTCON_USB) == true)
> + mtk_musb_set_mailbox(glue, MTK_VBUS_VALID);
> +}
> +
> +static irqreturn_t generic_interrupt(int irq, void *__hci)
> +{
> + unsigned long flags;
> + irqreturn_t retval = IRQ_NONE;
> + struct musb *musb = __hci;
> +
> + spin_lock_irqsave(&musb->lock, flags);
> + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB) &
> + musb_readb(musb->mregs, MUSB_INTRUSBE);
> + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX)
> + & musb_readw(musb->mregs, MUSB_INTRTXE);
> + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX)
> + & musb_readw(musb->mregs, MUSB_INTRRXE);
> + /* MediaTek controller interrupt status is W1C */
> + musb_clearw(musb->mregs, MUSB_INTRRX, musb->int_rx);
> + musb_clearw(musb->mregs, MUSB_INTRTX, musb->int_tx);
> + musb_clearb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
> +
> + if (musb->int_usb || musb->int_tx || musb->int_rx)
> + retval = musb_interrupt(musb);
> +
> + spin_unlock_irqrestore(&musb->lock, flags);
> +
> + return retval;
> +}
> +
> +static irqreturn_t mtk_musb_interrupt(int irq, void *dev_id)
> +{
> + irqreturn_t retval = IRQ_NONE;
> + struct musb *musb = (struct musb *)dev_id;
> + u32 l1_ints;
> +
> + l1_ints = musb_readl(musb->mregs, USB_L1INTS) &
> + musb_readl(musb->mregs, USB_L1INTM);
> +
> + if (l1_ints & (TX_INT_STATUS | RX_INT_STATUS | USBCOM_INT_STATUS))
> + retval = generic_interrupt(irq, musb);
> +
> +#if defined(CONFIG_USB_INVENTRA_DMA)
> + if (l1_ints & DMA_INT_STATUS)
> + retval = dma_controller_irq(irq, musb->dma_controller);
> +#endif
> + return retval;
> +}
> +
> +static u32 mtk_musb_busctl_offset(u8 epnum, u16 offset)
> +{
> + return MTK_MUSB_TXFUNCADDR + offset + 8 * epnum;
> +}
> +
> +static void mtk_musb_clearb(void __iomem *addr, unsigned int offset, u8 data)
remove 'u8 data' parameter, then add:
> +{
u8 data;
> + /* W1C */
data = musb_readb(addr, offset);
> + musb_writeb(addr, offset, data);
> +}
> +
> +static void mtk_musb_clearw(void __iomem *addr, unsigned int offset, u16 data)
> +{
> + /* W1C */
> + musb_writew(addr, offset, data);
> +}
similar as mtk_musb_clearb() above.
> +
> +static int mtk_musb_init(struct musb *musb)
> +{
> + struct device *dev = musb->controller;
> + struct mtk_glue *glue = dev_get_drvdata(dev->parent);
> + int ret;
[snip]
> + if (pdata->mode == USB_DR_MODE_OTG)
> + mtk_otg_switch_init(glue);
> +
> + dev_info(dev, "USB probe done!\n");
not really useful, can be removed.
> + return 0;
> +
> +err_device_register:
> + mtk_musb_clks_disable(glue);
> +err_enable_clk:
> + pm_runtime_put_sync(dev);
> + pm_runtime_disable(dev);
> +err_unregister_usb_phy:
> + usb_phy_generic_unregister(glue->usb_phy);
> + return ret;
> +}
> +
> +static int mtk_musb_remove(struct platform_device *pdev)
> +{
> + struct mtk_glue *glue = platform_get_drvdata(pdev);
> + struct platform_device *usb_phy = glue->usb_phy;
> +
> + platform_device_unregister(glue->musb_pdev);
> + usb_phy_generic_unregister(usb_phy);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id mtk_musb_match[] = {
> + {.compatible = "mediatek,mtk-musb",},
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mtk_musb_match);
> +#endif
> +
> +static struct platform_driver mtk_musb_driver = {
> + .probe = mtk_musb_probe,
> + .remove = mtk_musb_remove,
> + .driver = {
> + .name = "musb-mtk",
> + .of_match_table = of_match_ptr(mtk_musb_match),
> + },
> +};
> +
> +module_platform_driver(mtk_musb_driver);
> +
> +MODULE_DESCRIPTION("MediaTek MUSB Glue Layer");
> +MODULE_AUTHOR("Min Guo <min.guo@xxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index b7d5627..2c0d102 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -260,6 +260,11 @@ static void musb_default_writeb(void __iomem *addr, unsigned offset, u8 data)
> __raw_writeb(data, addr + offset);
> }
>
> +static void
> +musb_default_clearb(void __iomem *addr, unsigned int offset, u8 data)
> +{
> +}
don't need this, use musb_readb() for the function pointer.
> +
> static u16 musb_default_readw(const void __iomem *addr, unsigned offset)
> {
> u16 data = __raw_readw(addr + offset);
> @@ -274,6 +279,43 @@ static void musb_default_writew(void __iomem *addr, unsigned offset, u16 data)
> __raw_writew(data, addr + offset);
> }
>
> +static void
> +musb_default_clearw(void __iomem *addr, unsigned int offset, u16 data)
> +{
> +}
don't need this, use musb_readw() for the function pointer.
> +
> +static u16 musb_default_get_toggle(struct musb_qh *qh, int is_in)
> +{
> + void __iomem *epio = qh->hw_ep->regs;
> + u16 csr;
> +
> + if (is_in)
> + csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
> + else
> + csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
> +
> + return csr;
> +}
> +
> +static u16 musb_default_set_toggle(struct musb_qh *qh, int is_in,
> + struct urb *urb)
> +{
> + u16 csr = 0;
> + u16 toggle = 0;
no need to assign them 0.
> +
> + toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in);
> +
> + if (is_in)
> + csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE
> + | MUSB_RXCSR_H_DATATOGGLE) : 0;
> + else
> + csr |= toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE
> + | MUSB_TXCSR_H_DATATOGGLE)
> + : MUSB_TXCSR_CLRDATATOG;
> +
> + return csr;
> +}
> +
> /*
> * Load an endpoint's FIFO
> */
> @@ -370,12 +412,18 @@ static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
> void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data);
> EXPORT_SYMBOL_GPL(musb_writeb);
>
> +void (*musb_clearb)(void __iomem *addr, unsigned int offset, u8 data);
> +EXPORT_SYMBOL_GPL(musb_clearb);
> +
> u16 (*musb_readw)(const void __iomem *addr, unsigned offset);
> EXPORT_SYMBOL_GPL(musb_readw);
>
> void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data);
> EXPORT_SYMBOL_GPL(musb_writew);
>
> +void (*musb_clearw)(void __iomem *addr, unsigned int offset, u16 data);
> +EXPORT_SYMBOL_GPL(musb_clearw);
> +
> u32 musb_readl(const void __iomem *addr, unsigned offset)
> {
> u32 data = __raw_readl(addr + offset);
> @@ -1028,6 +1076,11 @@ static void musb_disable_interrupts(struct musb *musb)
> temp = musb_readb(mbase, MUSB_INTRUSB);
> temp = musb_readw(mbase, MUSB_INTRTX);
> temp = musb_readw(mbase, MUSB_INTRRX);
replace the 3 line above with
musb_clearb/w();
> +
> + /* some platform needs clear pending interrupts by manual */
> + musb_clearb(mbase, MUSB_INTRUSB, musb_readb(mbase, MUSB_INTRUSB));
> + musb_clearw(mbase, MUSB_INTRRX, musb_readw(mbase, MUSB_INTRRX));
> + musb_clearw(mbase, MUSB_INTRTX, musb_readw(mbase, MUSB_INTRTX));
then those are no longer needed.
> }
>
> static void musb_enable_interrupts(struct musb *musb)
> @@ -2192,6 +2245,8 @@ static void musb_deassert_reset(struct work_struct *work)
> musb_writeb = musb_default_writeb;
> musb_readw = musb_default_readw;
> musb_writew = musb_default_writew;
> + musb_clearb = musb_default_clearb;
> + musb_clearw = musb_default_clearw;
>
> /* The musb_platform_init() call:
> * - adjusts musb->mregs
> @@ -2252,10 +2307,14 @@ static void musb_deassert_reset(struct work_struct *work)
> musb_readb = musb->ops->readb;
> if (musb->ops->writeb)
> musb_writeb = musb->ops->writeb;
> + if (musb->ops->clearb)
> + musb_clearb = musb->ops->clearb;
else
musb_clearb = musb_readb;
> if (musb->ops->readw)
> musb_readw = musb->ops->readw;
> if (musb->ops->writew)
> musb_writew = musb->ops->writew;
> + if (musb->ops->clearw)
> + musb_clearw = musb->ops->clearw;
else
musb_clearw = musb_readw;
>
> #ifndef CONFIG_MUSB_PIO_ONLY
> if (!musb->ops->dma_init || !musb->ops->dma_exit) {
> @@ -2277,6 +2336,16 @@ static void musb_deassert_reset(struct work_struct *work)
> else
> musb->io.write_fifo = musb_default_write_fifo;
>
> + if (musb->ops->get_toggle)
> + musb->io.get_toggle = musb->ops->get_toggle;
> + else
> + musb->io.get_toggle = musb_default_get_toggle;
> +
> + if (musb->ops->set_toggle)
> + musb->io.set_toggle = musb->ops->set_toggle;
> + else
> + musb->io.set_toggle = musb_default_set_toggle;
> +
> if (!musb->xceiv->io_ops) {
> musb->xceiv->io_dev = musb->controller;
> musb->xceiv->io_priv = musb->mregs;
> diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
> index 04203b7..71dca80 100644
> --- a/drivers/usb/musb/musb_core.h
> +++ b/drivers/usb/musb/musb_core.h
> @@ -27,6 +27,7 @@
> struct musb;
> struct musb_hw_ep;
> struct musb_ep;
> +struct musb_qh;
>
> /* Helper defines for struct musb->hwvers */
> #define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f)
> @@ -119,10 +120,14 @@ enum musb_g_ep0_state {
> * @fifo_offset: returns the fifo offset
> * @readb: read 8 bits
> * @writeb: write 8 bits
> + * @clearb: clear 8 bits,
add "could be clear-on-read or W1C" to give more info.
> * @readw: read 16 bits
> * @writew: write 16 bits
> + * @clearw: clear 16 bits
> * @read_fifo: reads the fifo
> * @write_fifo: writes to fifo
> + * @get_toggle: platform specific get toggle function
> + * @set_toggle: platform specific set toggle function
> * @dma_init: platform specific dma init function
> * @dma_exit: platform specific dma exit function
> * @init: turns on clocks, sets up platform-specific registers, etc
> @@ -163,10 +168,14 @@ struct musb_platform_ops {
> u32 (*busctl_offset)(u8 epnum, u16 offset);
> u8 (*readb)(const void __iomem *addr, unsigned offset);
> void (*writeb)(void __iomem *addr, unsigned offset, u8 data);
> + void (*clearb)(void __iomem *addr, unsigned int offset, u8 data);
> u16 (*readw)(const void __iomem *addr, unsigned offset);
> void (*writew)(void __iomem *addr, unsigned offset, u16 data);
> + void (*clearw)(void __iomem *addr, unsigned int offset, u16 data);
> void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
> void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
> + u16 (*get_toggle)(struct musb_qh *qh, int is_in);
> + u16 (*set_toggle)(struct musb_qh *qh, int is_in, struct urb *urb);
> struct dma_controller *
> (*dma_init) (struct musb *musb, void __iomem *base);
> void (*dma_exit)(struct dma_controller *c);
> diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
> index 8f60271..05103ea 100644
> --- a/drivers/usb/musb/musb_dma.h
> +++ b/drivers/usb/musb/musb_dma.h
> @@ -35,6 +35,12 @@
> * whether shared with the Inventra core or separate.
> */
>
> +#define MUSB_HSDMA_BASE 0x200
> +#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
> +#define MUSB_HSDMA_CONTROL 0x4
> +#define MUSB_HSDMA_ADDRESS 0x8
> +#define MUSB_HSDMA_COUNT 0xc
> +
> #define DMA_ADDR_INVALID (~(dma_addr_t)0)
>
> #ifdef CONFIG_MUSB_PIO_ONLY
> @@ -191,6 +197,9 @@ static inline void musb_dma_controller_destroy(struct dma_controller *d) { }
> extern struct dma_controller *
> musbhs_dma_controller_create(struct musb *musb, void __iomem *base);
> extern void musbhs_dma_controller_destroy(struct dma_controller *c);
> +extern struct dma_controller *
> +musbhs_dma_controller_create_noirq(struct musb *musb, void __iomem *base);
> +extern irqreturn_t dma_controller_irq(int irq, void *private_data);
>
> extern struct dma_controller *
> tusb_dma_controller_create(struct musb *musb, void __iomem *base);
> diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
> index 16d0ba4..ba66f44 100644
> --- a/drivers/usb/musb/musb_host.c
> +++ b/drivers/usb/musb/musb_host.c
> @@ -290,39 +290,23 @@ static void musb_giveback(struct musb *musb, struct urb *urb, int status)
> static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
> struct urb *urb)
> {
> - void __iomem *epio = qh->hw_ep->regs;
> - u16 csr;
> + struct musb *musb = qh->hw_ep->musb;
> + u16 csr;
>
> /*
> * FIXME: the current Mentor DMA code seems to have
> * problems getting toggle correct.
> */
> -
> - if (is_in)
> - csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
> - else
> - csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
> -
> + csr = musb->io.get_toggle(qh, is_in);
> usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
> }
>
> static inline u16 musb_set_toggle(struct musb_qh *qh, int is_in,
> struct urb *urb)
> {
> - u16 csr = 0;
> - u16 toggle = 0;
> -
> - toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in);
> -
> - if (is_in)
> - csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE
> - | MUSB_RXCSR_H_DATATOGGLE) : 0;
> - else
> - csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE
> - | MUSB_TXCSR_H_DATATOGGLE)
> - : MUSB_TXCSR_CLRDATATOG;
> + struct musb *musb = qh->hw_ep->musb;
>
> - return csr;
> + return musb->io.set_toggle(qh, is_in, urb);
> }
Those two functions - musb_save_toggle() and musb_set_toggle() are very
short now, we can get rid of them, and directly use
musb->io.get/set_toggle().
>
> /*
> diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
> index 8058a58..9bae09b 100644
> --- a/drivers/usb/musb/musb_io.h
> +++ b/drivers/usb/musb/musb_io.h
> @@ -22,6 +22,8 @@
> * @read_fifo: platform specific function to read fifo
> * @write_fifo: platform specific function to write fifo
> * @busctl_offset: platform specific function to get busctl offset
> + * @get_toggle: platform specific function to get toggle
> + * @set_toggle: platform specific function to set toggle
> */
> struct musb_io {
> u32 (*ep_offset)(u8 epnum, u16 offset);
> @@ -30,13 +32,17 @@ struct musb_io {
> void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
> void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
> u32 (*busctl_offset)(u8 epnum, u16 offset);
> + u16 (*get_toggle)(struct musb_qh *qh, int is_in);
> + u16 (*set_toggle)(struct musb_qh *qh, int is_in, struct urb *urb);
> };
>
> /* Do not add new entries here, add them the struct musb_io instead */
> extern u8 (*musb_readb)(const void __iomem *addr, unsigned offset);
> extern void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data);
> +extern void (*musb_clearb)(void __iomem *addr, unsigned int offset, u8 data);
> extern u16 (*musb_readw)(const void __iomem *addr, unsigned offset);
> extern void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data);
> +extern void (*musb_clearw)(void __iomem *addr, unsigned int offset, u16 data);
> extern u32 musb_readl(const void __iomem *addr, unsigned offset);
> extern void musb_writel(void __iomem *addr, unsigned offset, u32 data);
>
> diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
> index a688f7f..b05fe68 100644
> --- a/drivers/usb/musb/musbhsdma.c
> +++ b/drivers/usb/musb/musbhsdma.c
> @@ -10,12 +10,7 @@
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include "musb_core.h"
> -
> -#define MUSB_HSDMA_BASE 0x200
> -#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
> -#define MUSB_HSDMA_CONTROL 0x4
> -#define MUSB_HSDMA_ADDRESS 0x8
> -#define MUSB_HSDMA_COUNT 0xc
> +#include "musb_dma.h"
>
> #define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
> (MUSB_HSDMA_BASE + (_bchannel << 4) + _offset)
> @@ -268,7 +263,7 @@ static int dma_channel_abort(struct dma_channel *channel)
> return 0;
> }
>
> -static irqreturn_t dma_controller_irq(int irq, void *private_data)
> +irqreturn_t dma_controller_irq(int irq, void *private_data)
> {
> struct musb_dma_controller *controller = private_data;
> struct musb *musb = controller->private_data;
> @@ -291,6 +286,9 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
>
> int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
>
> + /* some platform needs clear pending interrupts by manual */
> + musb_clearb(musb->mregs, MUSB_HSDMA_INTR, int_hsdma);
> +
> if (!int_hsdma) {
> musb_dbg(musb, "spurious DMA irq");
>
> @@ -382,6 +380,7 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
> spin_unlock_irqrestore(&musb->lock, flags);
> return retval;
> }
> +EXPORT_SYMBOL_GPL(dma_controller_irq);
>
> void musbhs_dma_controller_destroy(struct dma_controller *c)
> {
> @@ -397,18 +396,10 @@ void musbhs_dma_controller_destroy(struct dma_controller *c)
> }
> EXPORT_SYMBOL_GPL(musbhs_dma_controller_destroy);
>
> -struct dma_controller *musbhs_dma_controller_create(struct musb *musb,
> +static struct musb_dma_controller *dma_controller_alloc(struct musb *musb,
> void __iomem *base)
> {
> struct musb_dma_controller *controller;
> - struct device *dev = musb->controller;
> - struct platform_device *pdev = to_platform_device(dev);
> - int irq = platform_get_irq_byname(pdev, "dma");
> -
> - if (irq <= 0) {
> - dev_err(dev, "No DMA interrupt line!\n");
> - return NULL;
> - }
>
> controller = kzalloc(sizeof(*controller), GFP_KERNEL);
> if (!controller)
> @@ -422,6 +413,25 @@ struct dma_controller *musbhs_dma_controller_create(struct musb *musb,
> controller->controller.channel_release = dma_channel_release;
> controller->controller.channel_program = dma_channel_program;
> controller->controller.channel_abort = dma_channel_abort;
> + return controller;
> +}
> +
> +struct dma_controller *musbhs_dma_controller_create(struct musb *musb,
> + void __iomem *base)
> +{
> + struct musb_dma_controller *controller;
> + struct device *dev = musb->controller;
> + struct platform_device *pdev = to_platform_device(dev);
> + int irq = platform_get_irq_byname(pdev, "dma");
> +
> + if (irq <= 0) {
> + dev_err(dev, "No DMA interrupt line!\n");
> + return NULL;
> + }
> +
> + controller = dma_controller_alloc(musb, base);
> + if (!controller)
> + return NULL;
>
> if (request_irq(irq, dma_controller_irq, 0,
> dev_name(musb->controller), &controller->controller)) {
> @@ -436,3 +446,16 @@ struct dma_controller *musbhs_dma_controller_create(struct musb *musb,
> return &controller->controller;
> }
> EXPORT_SYMBOL_GPL(musbhs_dma_controller_create);
> +
> +struct dma_controller *musbhs_dma_controller_create_noirq(struct musb *musb,
> + void __iomem *base)
> +{
> + struct musb_dma_controller *controller;
> +
> + controller = dma_controller_alloc(musb, base);
> + if (!controller)
> + return NULL;
> +
> + return &controller->controller;
> +}
> +EXPORT_SYMBOL_GPL(musbhs_dma_controller_create_noirq);
regards,
-Bin.