Re: [PATCH v5 6/7] power: supply: olpc_battery: Avoid using platform_info

[Sebastian Reichel]

Hi,

On Thu, Jan 10, 2019 at 06:40:04PM +0100, Lubomir Rintel wrote:
> This wouldn't work on the DT-based ARM platform. Let's read the EC version
> directly from the EC driver instead.
> 
> This removes x86 specific bits that would prevent this driver from being
> used with the EC of ARM-based OLPC XO 1.75.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> Acked-by: Pavel Machek <pavel@xxxxxx>
> Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
> 
> ---
> Changes since v2:
> - Move the priv data allocation hunk from this patch to a proper place
> 
> Changes since v1:
> - Use uint8_t instead of unsigned char [1] for ecver
> 
>  drivers/power/supply/olpc_battery.c | 25 +++++++++++++++++--------
>  1 file changed, 17 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c
> index 1fcc459433a8..a6c89d002d5d 100644
> --- a/drivers/power/supply/olpc_battery.c
> +++ b/drivers/power/supply/olpc_battery.c
> @@ -22,7 +22,6 @@
>  #include <linux/olpc-ec.h>
>  #include <asm/olpc.h>
>  
> -
>  #define EC_BAT_VOLTAGE	0x10	/* uint16_t,	*9.76/32,    mV   */
>  #define EC_BAT_CURRENT	0x11	/* int16_t,	*15.625/120, mA   */
>  #define EC_BAT_ACR	0x12	/* int16_t,	*6250/15,    µAh  */
> @@ -57,6 +56,7 @@ struct olpc_battery_data {
>  	struct power_supply *olpc_ac;
>  	struct power_supply *olpc_bat;
>  	char bat_serial[17];
> +	int new_proto;

bool?

-- Sebastian

>  };
>  
>  /*********************************************************************
> @@ -100,7 +100,7 @@ static const struct power_supply_desc olpc_ac_desc = {
>  static int olpc_bat_get_status(struct olpc_battery_data *data,
>  		union power_supply_propval *val, uint8_t ec_byte)
>  {
> -	if (olpc_platform_info.ecver > 0x44) {
> +	if (data->new_proto) {
>  		if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
>  			val->intval = POWER_SUPPLY_STATUS_CHARGING;
>  		else if (ec_byte & BAT_STAT_DISCHARGING)
> @@ -608,6 +608,7 @@ static int olpc_battery_probe(struct platform_device *pdev)
>  	struct power_supply_config psy_cfg = {};
>  	struct olpc_battery_data *data;
>  	uint8_t status;
> +	uint8_t ecver;
>  	int ret;
>  
>  	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> @@ -615,13 +616,21 @@ static int olpc_battery_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  	platform_set_drvdata(pdev, data);
>  
> -	/*
> -	 * We've seen a number of EC protocol changes; this driver requires
> -	 * the latest EC protocol, supported by 0x44 and above.
> -	 */
> -	if (olpc_platform_info.ecver < 0x44) {
> +	/* See if the EC is already there and get the EC revision */
> +	ret = olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, &ecver, 1);
> +	if (ret)
> +		return ret;
> +
> +	if (ecver > 0x44) {
> +		/* XO 1 or 1.5 with a new EC firmware. */
> +		data->new_proto = 1;
> +	} else if (ecver < 0x44) {
> +		/*
> +		 * We've seen a number of EC protocol changes; this driver
> +		 * requires the latest EC protocol, supported by 0x44 and above.
> +		 */
>  		printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
> -			"battery driver.\n", olpc_platform_info.ecver);
> +			"battery driver.\n", ecver);
>  		return -ENXIO;
>  	}
>  
> -- 
> 2.20.1
>

Attachment: signature.asc
Description: PGP signature