[PATCH v2] ARC: [scripted] fix node name and address spelling

From: Alexey Brodkin
Date: Thu Jan 24 2019 - 07:17:24 EST


From: Alexey Brodkin <alexey.brodkin@xxxxxxxxxxxx>

1. Remove "0x" prefix from unit-address of node names
----------------------->8------------------------
sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts*
----------------------->8------------------------

2. Make all hex addresses lowercase:
----------------------->8------------------------
sed -i 's/@\([0-9A-Za-z]*\)/@\L\1/g' arch/arc/boot/dts/*.dts*
sed -i 's/0x\([0-9A-Za-z]*\)/0x\L\1/g' arch/arc/boot/dts/*.dts*
----------------------->8------------------------

Inspired by [1] and the like.

[1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/

Signed-off-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
---

Changes v1 -> v2:

* Convert all hex addresses to lower-case [Rob]

arch/arc/boot/dts/abilis_tb100.dtsi | 58 ++++++++++++++++----------------
arch/arc/boot/dts/abilis_tb100_dvk.dts | 14 ++++----
arch/arc/boot/dts/abilis_tb101.dtsi | 58 ++++++++++++++++----------------
arch/arc/boot/dts/abilis_tb101_dvk.dts | 14 ++++----
arch/arc/boot/dts/abilis_tb10x.dtsi | 60 +++++++++++++++++-----------------
arch/arc/boot/dts/axc001.dtsi | 6 ++--
arch/arc/boot/dts/axc003.dtsi | 16 ++++-----
arch/arc/boot/dts/axc003_idu.dtsi | 16 ++++-----
arch/arc/boot/dts/axs10x_mb.dtsi | 22 ++++++-------
arch/arc/boot/dts/hsdk.dts | 4 +--
arch/arc/boot/dts/vdk_axc003.dtsi | 4 +--
arch/arc/boot/dts/vdk_axc003_idu.dtsi | 4 +--
arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 18 +++++-----
13 files changed, 147 insertions(+), 147 deletions(-)

diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi
index 02410b211433..c0bcd97522bb 100644
--- a/arch/arc/boot/dts/abilis_tb100.dtsi
+++ b/arch/arc/boot/dts/abilis_tb100.dtsi
@@ -38,7 +38,7 @@
clock-div = <6>;
};

- iomux: iomux@FF10601c {
+ iomux: iomux@ff10601c {
/* Port 1 */
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
abilis,function = "mis0";
@@ -162,182 +162,182 @@
};
};

- gpioa: gpio@FF140000 {
+ gpioa: gpio@ff140000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF140000 0x1000>;
+ reg = <0xff140000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioa";
};
- gpiob: gpio@FF141000 {
+ gpiob: gpio@ff141000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF141000 0x1000>;
+ reg = <0xff141000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiob";
};
- gpioc: gpio@FF142000 {
+ gpioc: gpio@ff142000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF142000 0x1000>;
+ reg = <0xff142000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioc";
};
- gpiod: gpio@FF143000 {
+ gpiod: gpio@ff143000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF143000 0x1000>;
+ reg = <0xff143000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiod";
};
- gpioe: gpio@FF144000 {
+ gpioe: gpio@ff144000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF144000 0x1000>;
+ reg = <0xff144000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioe";
};
- gpiof: gpio@FF145000 {
+ gpiof: gpio@ff145000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF145000 0x1000>;
+ reg = <0xff145000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiof";
};
- gpiog: gpio@FF146000 {
+ gpiog: gpio@ff146000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF146000 0x1000>;
+ reg = <0xff146000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiog";
};
- gpioh: gpio@FF147000 {
+ gpioh: gpio@ff147000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF147000 0x1000>;
+ reg = <0xff147000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioh";
};
- gpioi: gpio@FF148000 {
+ gpioi: gpio@ff148000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF148000 0x1000>;
+ reg = <0xff148000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <12>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioi";
};
- gpioj: gpio@FF149000 {
+ gpioj: gpio@ff149000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF149000 0x1000>;
+ reg = <0xff149000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <32>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioj";
};
- gpiok: gpio@FF14a000 {
+ gpiok: gpio@ff14a000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF14A000 0x1000>;
+ reg = <0xff14a000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <22>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiok";
};
- gpiol: gpio@FF14b000 {
+ gpiol: gpio@ff14b000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF14B000 0x1000>;
+ reg = <0xff14b000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiol";
};
- gpiom: gpio@FF14c000 {
+ gpiom: gpio@ff14c000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF14C000 0x1000>;
+ reg = <0xff14c000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiom";
};
- gpion: gpio@FF14d000 {
+ gpion: gpio@ff14d000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF14D000 0x1000>;
+ reg = <0xff14d000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <5>;
diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
index 3acf04db8030..c968e677db46 100644
--- a/arch/arc/boot/dts/abilis_tb100_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -37,27 +37,27 @@
};

soc100 {
- uart@FF100000 {
+ uart@ff100000 {
pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>;
};
- ethernet@FE100000 {
+ ethernet@fe100000 {
phy-mode = "rgmii";
};

- i2c0: i2c@FF120000 {
+ i2c0: i2c@ff120000 {
i2c-sda-hold-time-ns = <432>;
};
- i2c1: i2c@FF121000 {
+ i2c1: i2c@ff121000 {
i2c-sda-hold-time-ns = <432>;
};
- i2c2: i2c@FF122000 {
+ i2c2: i2c@ff122000 {
i2c-sda-hold-time-ns = <432>;
};
- i2c3: i2c@FF123000 {
+ i2c3: i2c@ff123000 {
i2c-sda-hold-time-ns = <432>;
};
- i2c4: i2c@FF124000 {
+ i2c4: i2c@ff124000 {
i2c-sda-hold-time-ns = <432>;
};

diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi
index f9e7686044eb..6a1615f58f05 100644
--- a/arch/arc/boot/dts/abilis_tb101.dtsi
+++ b/arch/arc/boot/dts/abilis_tb101.dtsi
@@ -38,7 +38,7 @@
clock-div = <6>;
};

- iomux: iomux@FF10601c {
+ iomux: iomux@ff10601c {
/* Port 1 */
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
abilis,function = "mis0";
@@ -171,182 +171,182 @@
};
};

- gpioa: gpio@FF140000 {
+ gpioa: gpio@ff140000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF140000 0x1000>;
+ reg = <0xff140000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioa";
};
- gpiob: gpio@FF141000 {
+ gpiob: gpio@ff141000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF141000 0x1000>;
+ reg = <0xff141000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiob";
};
- gpioc: gpio@FF142000 {
+ gpioc: gpio@ff142000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF142000 0x1000>;
+ reg = <0xff142000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioc";
};
- gpiod: gpio@FF143000 {
+ gpiod: gpio@ff143000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF143000 0x1000>;
+ reg = <0xff143000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiod";
};
- gpioe: gpio@FF144000 {
+ gpioe: gpio@ff144000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF144000 0x1000>;
+ reg = <0xff144000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioe";
};
- gpiof: gpio@FF145000 {
+ gpiof: gpio@ff145000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF145000 0x1000>;
+ reg = <0xff145000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiof";
};
- gpiog: gpio@FF146000 {
+ gpiog: gpio@ff146000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF146000 0x1000>;
+ reg = <0xff146000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiog";
};
- gpioh: gpio@FF147000 {
+ gpioh: gpio@ff147000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF147000 0x1000>;
+ reg = <0xff147000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioh";
};
- gpioi: gpio@FF148000 {
+ gpioi: gpio@ff148000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF148000 0x1000>;
+ reg = <0xff148000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <12>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioi";
};
- gpioj: gpio@FF149000 {
+ gpioj: gpio@ff149000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF149000 0x1000>;
+ reg = <0xff149000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <32>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioj";
};
- gpiok: gpio@FF14a000 {
+ gpiok: gpio@ff14a000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF14A000 0x1000>;
+ reg = <0xff14a000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <22>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiok";
};
- gpiol: gpio@FF14b000 {
+ gpiol: gpio@ff14b000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF14B000 0x1000>;
+ reg = <0xff14b000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiol";
};
- gpiom: gpio@FF14c000 {
+ gpiom: gpio@ff14c000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF14C000 0x1000>;
+ reg = <0xff14c000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiom";
};
- gpion: gpio@FF14d000 {
+ gpion: gpio@ff14d000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
- reg = <0xFF14D000 0x1000>;
+ reg = <0xff14d000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <5>;
diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
index 37d88c5dd181..05143ce9c120 100644
--- a/arch/arc/boot/dts/abilis_tb101_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -37,27 +37,27 @@
};

soc100 {
- uart@FF100000 {
+ uart@ff100000 {
pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>;
};
- ethernet@FE100000 {
+ ethernet@fe100000 {
phy-mode = "rgmii";
};

- i2c0: i2c@FF120000 {
+ i2c0: i2c@ff120000 {
i2c-sda-hold-time-ns = <432>;
};
- i2c1: i2c@FF121000 {
+ i2c1: i2c@ff121000 {
i2c-sda-hold-time-ns = <432>;
};
- i2c2: i2c@FF122000 {
+ i2c2: i2c@ff122000 {
i2c-sda-hold-time-ns = <432>;
};
- i2c3: i2c@FF123000 {
+ i2c3: i2c@ff123000 {
i2c-sda-hold-time-ns = <432>;
};
- i2c4: i2c@FF124000 {
+ i2c4: i2c@ff124000 {
i2c-sda-hold-time-ns = <432>;
};

diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
index 3121536b25a3..2fbf1bdfe6de 100644
--- a/arch/arc/boot/dts/abilis_tb10x.dtsi
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -54,7 +54,7 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0xfe000000 0xfe000000 0x02000000
- 0x000F0000 0x000F0000 0x00010000>;
+ 0x000f0000 0x000f0000 0x00010000>;
compatible = "abilis,tb10x", "simple-bus";

pll0: oscillator {
@@ -75,10 +75,10 @@
clock-output-names = "ahb_clk";
};

- iomux: iomux@FF10601c {
+ iomux: iomux@ff10601c {
compatible = "abilis,tb10x-iomux";
#gpio-range-cells = <3>;
- reg = <0xFF10601c 0x4>;
+ reg = <0xff10601c 0x4>;
};

intc: interrupt-controller {
@@ -88,7 +88,7 @@
};
tb10x_ictl: pic@fe002000 {
compatible = "abilis,tb10x-ictl";
- reg = <0xFE002000 0x20>;
+ reg = <0xfe002000 0x20>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
@@ -96,27 +96,27 @@
20 21 22 23 24 25 26 27 28 29 30 31>;
};

- uart@FF100000 {
+ uart@ff100000 {
compatible = "snps,dw-apb-uart";
- reg = <0xFF100000 0x100>;
+ reg = <0xff100000 0x100>;
clock-frequency = <166666666>;
interrupts = <25 8>;
reg-shift = <2>;
reg-io-width = <4>;
interrupt-parent = <&tb10x_ictl>;
};
- ethernet@FE100000 {
+ ethernet@fe100000 {
compatible = "snps,dwmac-3.70a","snps,dwmac";
- reg = <0xFE100000 0x1058>;
+ reg = <0xfe100000 0x1058>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <6 8>;
interrupt-names = "macirq";
clocks = <&ahb_clk>;
clock-names = "stmmaceth";
};
- dma@FE000000 {
+ dma@fe000000 {
compatible = "snps,dma-spear1340";
- reg = <0xFE000000 0x400>;
+ reg = <0xfe000000 0x400>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <14 8>;
dma-channels = <6>;
@@ -132,70 +132,70 @@
multi-block = <1 1 1 1 1 1>;
};

- i2c0: i2c@FF120000 {
+ i2c0: i2c@ff120000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
- reg = <0xFF120000 0x1000>;
+ reg = <0xff120000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 8>;
clocks = <&ahb_clk>;
};
- i2c1: i2c@FF121000 {
+ i2c1: i2c@ff121000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
- reg = <0xFF121000 0x1000>;
+ reg = <0xff121000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 8>;
clocks = <&ahb_clk>;
};
- i2c2: i2c@FF122000 {
+ i2c2: i2c@ff122000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
- reg = <0xFF122000 0x1000>;
+ reg = <0xff122000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 8>;
clocks = <&ahb_clk>;
};
- i2c3: i2c@FF123000 {
+ i2c3: i2c@ff123000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
- reg = <0xFF123000 0x1000>;
+ reg = <0xff123000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 8>;
clocks = <&ahb_clk>;
};
- i2c4: i2c@FF124000 {
+ i2c4: i2c@ff124000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
- reg = <0xFF124000 0x1000>;
+ reg = <0xff124000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 8>;
clocks = <&ahb_clk>;
};

- spi0: spi@0xFE010000 {
+ spi0: spi@fe010000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "abilis,tb100-spi";
num-cs = <1>;
- reg = <0xFE010000 0x20>;
+ reg = <0xfe010000 0x20>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <26 8>;
clocks = <&ahb_clk>;
};
- spi1: spi@0xFE011000 {
+ spi1: spi@fe011000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "abilis,tb100-spi";
num-cs = <2>;
- reg = <0xFE011000 0x20>;
+ reg = <0xfe011000 0x20>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <10 8>;
clocks = <&ahb_clk>;
@@ -226,23 +226,23 @@
interrupts = <20 2>, <19 2>;
interrupt-names = "cmd_irq", "event_irq";
};
- tb10x_mdsc0: tb10x-mdscr@FF300000 {
+ tb10x_mdsc0: tb10x-mdscr@ff300000 {
compatible = "abilis,tb100-mdscr";
- reg = <0xFF300000 0x7000>;
+ reg = <0xff300000 0x7000>;
tb100-mdscr-manage-tsin;
};
- tb10x_mscr0: tb10x-mdscr@FF307000 {
+ tb10x_mscr0: tb10x-mdscr@ff307000 {
compatible = "abilis,tb100-mdscr";
- reg = <0xFF307000 0x7000>;
+ reg = <0xff307000 0x7000>;
};
tb10x_scr0: tb10x-mdscr@ff30e000 {
compatible = "abilis,tb100-mdscr";
- reg = <0xFF30e000 0x4000>;
+ reg = <0xff30e000 0x4000>;
tb100-mdscr-manage-tsin;
};
tb10x_scr1: tb10x-mdscr@ff312000 {
compatible = "abilis,tb100-mdscr";
- reg = <0xFF312000 0x4000>;
+ reg = <0xff312000 0x4000>;
tb100-mdscr-manage-tsin;
};
tb10x_wfb: tb10x-wfb@ff319000 {
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index fdc266504ada..37be3bf03ad6 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -41,7 +41,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
- dw-apb-gpio@0x2000 {
+ dw-apb-gpio@2000 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@@ -60,7 +60,7 @@
};
};

- debug_uart: dw-apb-uart@0x5000 {
+ debug_uart: dw-apb-uart@5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@@ -88,7 +88,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@0xe0012000 {
+ mb_intc: dw-apb-ictl@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index d75d65ddf8e3..effa37536d7a 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -55,7 +55,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
- dw-apb-gpio@0x2000 {
+ dw-apb-gpio@2000 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@@ -74,7 +74,7 @@
};
};

- debug_uart: dw-apb-uart@0x5000 {
+ debug_uart: dw-apb-uart@5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@@ -102,19 +102,19 @@
* external DMA buffer located outside of IOC aperture.
*/
axs10x_mb {
- ethernet@0x18000 {
+ ethernet@18000 {
dma-coherent;
};

- ehci@0x40000 {
+ ehci@40000 {
dma-coherent;
};

- ohci@0x60000 {
+ ohci@60000 {
dma-coherent;
};

- mmc@0x15000 {
+ mmc@15000 {
dma-coherent;
};
};
@@ -132,7 +132,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@0xe0012000 {
+ mb_intc: dw-apb-ictl@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
@@ -153,7 +153,7 @@
#size-cells = <2>;
ranges;
/*
- * Move frame buffer out of IOC aperture (0x8z-0xAz).
+ * Move frame buffer out of IOC aperture (0x8z-0xaz).
*/
frame_buffer: frame_buffer@be000000 {
compatible = "shared-dma-pool";
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index a05bb737ea63..e401e59f6180 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -62,7 +62,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
- dw-apb-gpio@0x2000 {
+ dw-apb-gpio@2000 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@@ -81,7 +81,7 @@
};
};

- debug_uart: dw-apb-uart@0x5000 {
+ debug_uart: dw-apb-uart@5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@@ -109,19 +109,19 @@
* external DMA buffer located outside of IOC aperture.
*/
axs10x_mb {
- ethernet@0x18000 {
+ ethernet@18000 {
dma-coherent;
};

- ehci@0x40000 {
+ ehci@40000 {
dma-coherent;
};

- ohci@0x60000 {
+ ohci@60000 {
dma-coherent;
};

- mmc@0x15000 {
+ mmc@15000 {
dma-coherent;
};
};
@@ -138,7 +138,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@0xe0012000 {
+ mb_intc: dw-apb-ictl@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
@@ -159,7 +159,7 @@
#size-cells = <2>;
ranges;
/*
- * Move frame buffer out of IOC aperture (0x8z-0xAz).
+ * Move frame buffer out of IOC aperture (0x8z-0xaz).
*/
frame_buffer: frame_buffer@be000000 {
compatible = "shared-dma-pool";
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 37bafd44e36d..4ead6dc9af2f 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -72,7 +72,7 @@
};
};

- gmac: ethernet@0x18000 {
+ gmac: ethernet@18000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
@@ -88,13 +88,13 @@
mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
};

- ehci@0x40000 {
+ ehci@40000 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};

- ohci@0x60000 {
+ ohci@60000 {
compatible = "generic-ohci";
reg = < 0x60000 0x100 >;
interrupts = < 8 >;
@@ -118,7 +118,7 @@
* dw_mci_pltfm_prepare_command() is used in generic platform
* code.
*/
- mmc@0x15000 {
+ mmc@15000 {
compatible = "altr,socfpga-dw-mshc";
reg = < 0x15000 0x400 >;
fifo-depth = < 16 >;
@@ -129,7 +129,7 @@
bus-width = < 4 >;
};

- uart@0x20000 {
+ uart@20000 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <33333333>;
@@ -139,7 +139,7 @@
reg-io-width = <4>;
};

- uart@0x21000 {
+ uart@21000 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <33333333>;
@@ -150,7 +150,7 @@
};

/* UART muxed with USB data port (ttyS3) */
- uart@0x22000 {
+ uart@22000 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <33333333>;
@@ -160,7 +160,7 @@
reg-io-width = <4>;
};

- i2c@0x1d000 {
+ i2c@1d000 {
compatible = "snps,designware-i2c";
reg = <0x1d000 0x100>;
clock-frequency = <400000>;
@@ -177,7 +177,7 @@
#sound-dai-cells = <0>;
};

- i2c@0x1f000 {
+ i2c@1f000 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -218,13 +218,13 @@
};
};

- eeprom@0x54{
+ eeprom@54{
compatible = "atmel,24c01";
reg = <0x54>;
pagesize = <0x8>;
};

- eeprom@0x57{
+ eeprom@57{
compatible = "atmel,24c04";
reg = <0x57>;
pagesize = <0x8>;
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index 43f17b51ee89..6c23fa063ced 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -110,12 +110,12 @@
cgu_rst: reset-controller@8a0 {
compatible = "snps,hsdk-reset";
#reset-cells = <1>;
- reg = <0x8A0 0x4>, <0xFF0 0x4>;
+ reg = <0x8a0 0x4>, <0xff0 0x4>;
};

core_clk: core-clk@0 {
compatible = "snps,hsdk-core-pll-clock";
- reg = <0x00 0x10>, <0x14B8 0x4>;
+ reg = <0x00 0x10>, <0x14b8 0x4>;
#clock-cells = <0>;
clocks = <&input_clk>;

diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi
index 0fd6ba985b16..84e8766c8ca2 100644
--- a/arch/arc/boot/dts/vdk_axc003.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -36,7 +36,7 @@
#interrupt-cells = <1>;
};

- debug_uart: dw-apb-uart@0x5000 {
+ debug_uart: dw-apb-uart@5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <2403200>;
@@ -49,7 +49,7 @@

};

- mb_intc: dw-apb-ictl@0xe0012000 {
+ mb_intc: dw-apb-ictl@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
index 28956f9a9f3d..eb7e705e8a27 100644
--- a/arch/arc/boot/dts/vdk_axc003_idu.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -44,7 +44,7 @@
#interrupt-cells = <1>;
};

- debug_uart: dw-apb-uart@0x5000 {
+ debug_uart: dw-apb-uart@5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <2403200>;
@@ -57,7 +57,7 @@

};

- mb_intc: dw-apb-ictl@0xe0012000 {
+ mb_intc: dw-apb-ictl@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index 48bb4b4cd234..925d5cc95dbb 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -36,7 +36,7 @@
};
};

- ethernet@0x18000 {
+ ethernet@18000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
@@ -49,13 +49,13 @@
clock-names = "stmmaceth";
};

- ehci@0x40000 {
+ ehci@40000 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};

- uart@0x20000 {
+ uart@20000 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <2403200>;
@@ -65,7 +65,7 @@
reg-io-width = <4>;
};

- uart@0x21000 {
+ uart@21000 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <2403200>;
@@ -75,7 +75,7 @@
reg-io-width = <4>;
};

- uart@0x22000 {
+ uart@22000 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <2403200>;
@@ -101,7 +101,7 @@
interrupt-names = "arc_ps2_irq";
};

- mmc@0x15000 {
+ mmc@15000 {
compatible = "snps,dw-mshc";
reg = <0x15000 0x400>;
fifo-depth = <1024>;
@@ -117,11 +117,11 @@
* Embedded Vision subsystem UIO mappings; only relevant for EV VDK
*
* This node is intentionally put outside of MB above becase
- * it maps areas outside of MB's 0xEz-0xFz.
+ * it maps areas outside of MB's 0xez-0xfz.
*/
- uio_ev: uio@0xD0000000 {
+ uio_ev: uio@d0000000 {
compatible = "generic-uio";
- reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
+ reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>;
reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
interrupt-parent = <&mb_intc>;
interrupts = <23>;
--
2.16.2