Re: [PATCH net] net: mvpp2: fix condition for setting up link interrupt

[Russell King - ARM Linux admin]

On Thu, Jan 24, 2019 at 04:51:37PM +0100, Andrew Lunn wrote:
> On Thu, Jan 24, 2019 at 02:18:03PM +0100, Thomas Bogendoerfer wrote:
> > Set up link interrupt if connection is handled by phylink otherwise
> > link state change detection for in-band-status doesn't work.
> 
> Hi Thomas
> 
> Please ensure the maintainers of the driver are at least on Cc:

... and other interested parties!

> Thanks
> 	Andrew
> 
> > 
> > Fixes: 4bb043262878 ("net: mvpp2: phylink support")
> > Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@xxxxxxx>
> > ---
> >  drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > index 16066c2d5b3a..0fbfe1945a69 100644
> > --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > @@ -3405,7 +3405,7 @@ static int mvpp2_open(struct net_device *dev)
> >  		valid = true;
> >  	}
> >  
> > -	if (priv->hw_version == MVPP22 && port->link_irq && !port->phylink) {
> > +	if (priv->hw_version == MVPP22 && port->link_irq && port->phylink) {
> >  		err = request_irq(port->link_irq, mvpp2_link_status_isr, 0,
> >  				  dev->name, port);
> >  		if (err) {

This still looks fishy to me.  mvpp2_link_status_isr() has handling in
it that is safe to be called for non-phylink cases, so presumably the
right fix is to drop the "&& !port->phylink" completely?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up