Re: LTP case read_all_proc fails on qemux86-64 since 5.0-rc1
From: He Zhe
Date: Thu Jan 24 2019 - 21:22:52 EST
On 1/25/19 10:05 AM, Jens Axboe wrote:
> On 1/24/19 6:40 PM, He Zhe wrote:
>>
>> On 1/24/19 11:40 PM, Jens Axboe wrote:
>>> On 1/24/19 1:23 AM, He Zhe wrote:
>>>> On 1/24/19 12:05 AM, Jens Axboe wrote:
>>>>> On 1/22/19 8:39 PM, Jens Axboe wrote:
>>>>>> On Jan 22, 2019, at 8:13 PM, He Zhe <zhe.he@xxxxxxxxxxxxx> wrote:
>>>>>>> LTP case read_all_proc(read_all -d /proc -q -r 10) often, but not every time, fails with the following call traces, since 600335205b8d "ide: convert to blk-mq"(5.0-rc1) till now(5.0-rc3).
>>>>>>>
>>>>>>> qemu-system-x86_64 -drive file=rootfs.ext4,if=virtio,format=raw -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -nographic -m 16192 -smp cpus=12 -cpu core2duo -enable-kvm -serial mon:stdio -serial null -kernel bzImage -append 'root=/dev/vda rw highres=off console=ttyS0 mem=16192M'
>>>>>>>
>>>>>>> tst_test.c:1085: INFO: Timeout per run is 0h 05m 00s
>>>>>>> [ 47.080156] Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
>>>>>>> [ 47.085330] ------------[ cut here ]------------
>>>>>>> [ 47.085810] kernel BUG at block/blk-mq.c:767!
>>>>>>> [ 47.086498] invalid opcode: 0000 [#1] PREEMPT SMP PTI
>>>>>>> [ 47.087022] CPU: 5 PID: 146 Comm: kworker/5:1H Not tainted 5.0.0-rc3 #1
>>>>>>> [ 47.087858] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
>>>>>>> [ 47.088992] Workqueue: kblockd blk_mq_run_work_fn
>>>>>>> [ 47.089469] RIP: 0010:blk_mq_add_to_requeue_list+0xc1/0xd0
>>>>>>> [ 47.090035] Code: 48 8d 53 48 49 8b 8c 24 b8 04 00 00 48 89 51 08 48 89 4b 48 49 8d 8c 24 b8 04 00 00 48 89 4b 50 49 89 94 24 b8 04 00 008
>>>>>>> [ 47.091930] RSP: 0018:ffff9e1ea4b43e40 EFLAGS: 00010002
>>>>>>> [ 47.092458] RAX: ffff9e1ea13c0048 RBX: ffff9e1ea13c0000 RCX: 0000000000000006
>>>>>>> [ 47.093181] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9e1ea13c0000
>>>>>>> [ 47.093906] RBP: ffff9e1ea4b43e68 R08: ffffeb5bcf630680 R09: 0000000000000000
>>>>>>> [ 47.094626] R10: 0000000000000001 R11: 0000000000000012 R12: ffff9e1ea1033a40
>>>>>>> [ 47.095347] R13: ffff9e1ea13a8d00 R14: ffff9e1ea13a9000 R15: 0000000000000046
>>>>>>> [ 47.096071] FS: 0000000000000000(0000) GS:ffff9e1ea4b40000(0000) knlGS:0000000000000000
>>>>>>> [ 47.096898] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>>>> [ 47.097477] CR2: 0000003fda41fda0 CR3: 00000003d8e6a000 CR4: 00000000000006e0
>>>>>>> [ 47.098203] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>>>>>> [ 47.098929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>>>>>>> [ 47.099650] Call Trace:
>>>>>>> [ 47.099910] <IRQ>
>>>>>>> [ 47.100128] blk_mq_requeue_request+0x58/0x60
>>>>>>> [ 47.100576] ide_requeue_and_plug+0x20/0x50
>>>>>>> [ 47.101014] ide_intr+0x21a/0x230
>>>>>>> [ 47.101362] ? idecd_open+0xc0/0xc0
>>>>>>> [ 47.101735] __handle_irq_event_percpu+0x43/0x1e0
>>>>>>> [ 47.102214] handle_irq_event_percpu+0x32/0x80
>>>>>>> [ 47.102668] handle_irq_event+0x39/0x60
>>>>>>> [ 47.103074] handle_edge_irq+0xe8/0x1c0
>>>>>>> [ 47.103470] handle_irq+0x20/0x30
>>>>>>> [ 47.103819] do_IRQ+0x46/0xe0
>>>>>>> [ 47.104128] common_interrupt+0xf/0xf
>>>>>>> [ 47.104505] </IRQ>
>>>>>>> [ 47.104731] RIP: 0010:ide_output_data+0xbc/0x100
>>>>>>> [ 47.105201] Code: 74 22 8d 41 ff 85 c9 74 24 49 8d 54 40 02 41 0f b7 00 66 41 89 01 49 83 c0 02 49 39 d0 75 ef 5b 41 5c 5d c3 4c 89 c6 445
>>>>>>> [ 47.107092] RSP: 0018:ffffbd508059bb18 EFLAGS: 00010246 ORIG_RAX: ffffffffffffffdd
>>>>>>> [ 47.107862] RAX: ffff9e1ea13a8800 RBX: ffff9e1ea13a9000 RCX: 0000000000000000
>>>>>>> [ 47.108581] RDX: 0000000000000170 RSI: ffff9e1ea13c012c RDI: 0000000000000000
>>>>>>> [ 47.109293] RBP: ffffbd508059bb28 R08: ffff9e1ea13c0120 R09: 0000000000000170
>>>>>>> [ 47.110016] R10: 000000000000000d R11: 000000000000000c R12: ffff9e1ea13a8800
>>>>>>> [ 47.110731] R13: 000000000000000c R14: ffff9e1ea13c0000 R15: 0000000000007530
>>>>>>> [ 47.111446] ide_transfer_pc+0x216/0x310
>>>>>>> [ 47.111848] ? __const_udelay+0x3d/0x40
>>>>>>> [ 47.112236] ? ide_execute_command+0x85/0xb0
>>>>>>> [ 47.112668] ? ide_pc_intr+0x3f0/0x3f0
>>>>>>> [ 47.113051] ? ide_check_atapi_device+0x110/0x110
>>>>>>> [ 47.113524] ide_issue_pc+0x178/0x240
>>>>>>> [ 47.113901] ide_cd_do_request+0x15c/0x350
>>>>>>> [ 47.114314] ide_queue_rq+0x180/0x6b0
>>>>>>> [ 47.114686] ? blk_mq_get_driver_tag+0xa1/0x110
>>>>>>> [ 47.115153] blk_mq_dispatch_rq_list+0x90/0x550
>>>>>>> [ 47.115606] ? __queue_delayed_work+0x63/0x90
>>>>>>> [ 47.116054] ? deadline_fifo_request+0x41/0x90
>>>>>>> [ 47.116506] blk_mq_do_dispatch_sched+0x80/0x100
>>>>>>> [ 47.116976] blk_mq_sched_dispatch_requests+0xfc/0x170
>>>>>>> [ 47.117491] __blk_mq_run_hw_queue+0x6f/0xd0
>>>>>>> [ 47.117941] blk_mq_run_work_fn+0x1b/0x20
>>>>>>> [ 47.118342] process_one_work+0x14c/0x450
>>>>>>> [ 47.118747] worker_thread+0x4a/0x440
>>>>>>> [ 47.119125] kthread+0x105/0x140
>>>>>>> [ 47.119456] ? process_one_work+0x450/0x450
>>>>>>> [ 47.119880] ? kthread_park+0x90/0x90
>>>>>>> [ 47.120251] ret_from_fork+0x35/0x40
>>>>>>> [ 47.120619] Modules linked in:
>>>>>>> [ 47.120952] ---[ end trace 4562f716e88fdefe ]---
>>>>>>> [ 47.121423] RIP: 0010:blk_mq_add_to_requeue_list+0xc1/0xd0
>>>>>>> [ 47.121981] Code: 48 8d 53 48 49 8b 8c 24 b8 04 00 00 48 89 51 08 48 89 4b 48 49 8d 8c 24 b8 04 00 00 48 89 4b 50 49 89 94 24 b8 04 00 008
>>>>>>> [ 47.123851] RSP: 0018:ffff9e1ea4b43e40 EFLAGS: 00010002
>>>>>>> [ 47.124393] RAX: ffff9e1ea13c0048 RBX: ffff9e1ea13c0000 RCX: 0000000000000006
>>>>>>> [ 47.125108] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9e1ea13c0000
>>>>>>> [ 47.125819] RBP: ffff9e1ea4b43e68 R08: ffffeb5bcf630680 R09: 0000000000000000
>>>>>>> [ 47.126539] R10: 0000000000000001 R11: 0000000000000012 R12: ffff9e1ea1033a40
>>>>>>> [ 47.127262] R13: ffff9e1ea13a8d00 R14: ffff9e1ea13a9000 R15: 0000000000000046
>>>>>>> [ 47.127988] FS: 0000000000000000(0000) GS:ffff9e1ea4b40000(0000) knlGS:0000000000000000
>>>>>>> [ 47.128793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>>>> [ 47.129385] CR2: 0000003fda41fda0 CR3: 00000003d8e6a000 CR4: 00000000000006e0
>>>>>>> [ 47.130104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>>>>>> [ 47.130823] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>>>>>>> [ 47.131547] Kernel panic - not syncing: Fatal exception in interrupt
>>>>>>> [ 47.132609] Kernel Offset: 0x7c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
>>>>>>> [ 47.133679] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
>>>>>>> [ 47.134432] ------------[ cut here ]-----------
>>>>>> Iâll take a look at this, thanks for the report.
>>>>> I can't reproduce this, unfortunately. But I'm guessing it might be related
>>>>> to a race with the requeue and request handling in IDE. Can you try with
>>>>> the below patch?
>>>> Thanks for attention, but this patch doesn't help.
>>> OK, thanks for trying.
>>>
>>>> From what I reached, to reproduce it, we need to use legacy CONFIG_IDE
>>>> and friends where "ide: convert to blk-mq" sits, not CONFIG_ATA and so
>>>> on. I can reproduce it with qemux86-64 with "-drive ... if=ide" or
>>>> "-drive ... if=virtio".
>>> Yes of course, I am trying to reproduce with the legacy stack. Just not
>>> having any luck doing it, even thousands of read_all iterations on /proc
>>> with IO to the IDE drives is still not doing it. From your trace, it
>>> looks like ide-cd causing it, which would mean a cdrom of some sort.
>>>
>>> I'll try again!
>> My .config is attached.
> Can you try with this patch?
With this patch, it cannot boot up.
[ÂÂÂ 7.832554] Uniform Multi-Platform E-IDE driver
[ÂÂÂ 7.833067] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[ÂÂÂ 7.833796] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[ÂÂÂ 7.834493]ÂÂÂÂ ide0: BM-DMA at 0xc060-0xc067
[ÂÂÂ 7.835361]ÂÂÂÂ ide1: BM-DMA at 0xc068-0xc06f
[ÂÂÂ 8.104196] hda: QEMU HARDDISK, ATA DISK drive
[ÂÂÂ 8.728309] hda: MWDMA2 mode selected
[ÂÂÂ 9.413190] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[ÂÂ 10.037303] hdc: MWDMA2 mode selected
[ÂÂ 10.037863] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ÂÂ 10.038333] ide: failed to init hda
[ÂÂ 10.038733] ide1 at 0x170-0x177,0x376 on irq 15
[ÂÂ 10.039195] ide: failed to init hdc
[ÂÂ 10.039646] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[ÂÂ 10.040364] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[ÂÂ 10.041054]ÂÂÂÂ ide0: BM-DMA at 0xc060-0xc067
[ÂÂ 10.041508]ÂÂÂÂ ide1: BM-DMA at 0xc068-0xc06f
[ÂÂ 10.310192] hda: QEMU HARDDISK, ATA DISK drive
[ÂÂ 10.934172] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:01.1/ide0'
[ÂÂ 10.935001] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc3 #5
[ÂÂ 10.935134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[ÂÂ 10.935134] Call Trace:
[ÂÂ 10.935134]Â dump_stack+0x62/0x95
[ÂÂ 10.935134]Â sysfs_warn_dup+0x79/0x90
[ÂÂ 10.935134]Â sysfs_create_dir_ns+0x211/0x290
[ÂÂ 10.935134]Â ? sysfs_create_mount_point+0x80/0x80
[ÂÂ 10.935134]Â ? kernel_init_freeable+0x4c9/0x659
[ÂÂ 10.935134]Â ? kasan_check_read+0x16/0x20
[ÂÂ 10.935134]Â ? _raw_spin_lock+0x8c/0xf0
[ÂÂ 10.935134]Â ? _raw_spin_lock_irq+0xf0/0xf0
[ÂÂ 10.935134]Â ? msleep+0x55/0x80
[ÂÂ 10.935134]Â kobject_add_internal+0x1f7/0x770
[ÂÂ 10.935134]Â kobject_add+0x11f/0x1f0
[ÂÂ 10.935134]Â ? kobject_add_internal+0x770/0x770
[ÂÂ 10.935134]Â ? __kmalloc_track_caller+0x6d/0x250
[ÂÂ 10.935134]Â ? kasan_kmalloc+0x11/0x20
[ÂÂ 10.935134]Â device_add+0x2ca/0x1460
[ÂÂ 10.935134]Â ? kobject_set_name_vargs+0xb4/0x130
[ÂÂ 10.935134]Â ? get_device_parent.isra.13+0x5e0/0x5e0
[ÂÂ 10.935134]Â ? pm_runtime_init+0x341/0x3f0
[ÂÂ 10.935134]Â device_register+0x1a/0x20
[ÂÂ 10.935134]Â ide_host_register+0x965/0x1a20
[ÂÂ 10.935134]Â ide_pci_init_two+0xb63/0x18e0
[ÂÂ 10.935134]Â ? kmem_cache_alloc+0x170/0x200
[ÂÂ 10.935134]Â ? __kernfs_new_node+0xd8/0x610
[ÂÂ 10.935134]Â ? ide_pci_setup_ports+0x920/0x920
[ÂÂ 10.935134]Â ? radix_tree_iter_tag_clear+0x50/0x90
[ÂÂ 10.935134]Â ? idr_alloc_u32+0x1a9/0x340
[ÂÂ 10.935134]Â ? __save_stack_trace+0x82/0x100
[ÂÂ 10.935134]Â ? __fprop_inc_percpu_max+0x1f0/0x1f0
[ÂÂ 10.935134]Â ? devres_free+0x40/0x60
[ÂÂ 10.935134]Â ? idr_alloc_cyclic+0xf2/0x1e0
[ÂÂ 10.935134]Â ? __mutex_lock_slowpath+0x20/0x20
[ÂÂ 10.935134]Â ? mutex_lock+0x88/0xf0
[ÂÂ 10.935134]Â ? kasan_check_read+0x16/0x20
[ÂÂ 10.935134]Â ? rpm_resume+0x1d5/0x1600
[ÂÂ 10.935134]Â ? _raw_spin_lock+0x8c/0xf0
[ÂÂ 10.935134]Â ? rpm_put_suppliers+0x140/0x140
[ÂÂ 10.935134]Â ? kasan_check_read+0x16/0x20
[ÂÂ 10.935134]Â ? _raw_spin_lock_irqsave+0x92/0x100
[ÂÂ 10.935134]Â ? _raw_read_unlock_irq+0x40/0x40
[ÂÂ 10.935134]Â ? mutex_lock+0x88/0xf0
[ÂÂ 10.935134]Â ? __mutex_lock_slowpath+0x20/0x20
[ÂÂ 10.935134]Â ide_pci_init_one+0x16/0x20
[ÂÂ 10.935134]Â piix_init_one+0x4a/0x60
[ÂÂ 10.935134]Â pci_device_probe+0x27c/0x490
[ÂÂ 10.935134]Â really_probe+0x465/0x720
[ÂÂ 10.935134]Â driver_probe_device+0xd1/0x210
[ÂÂ 10.935134]Â __driver_attach+0x214/0x280
[ÂÂ 10.935134]Â ? driver_probe_device+0x210/0x210
[ÂÂ 10.935134]Â bus_for_each_dev+0x11d/0x1e0
[ÂÂ 10.935134]Â ? subsys_dev_iter_exit+0x10/0x10
[ÂÂ 10.935134]Â ? kasan_check_write+0x19/0x20
[ÂÂ 10.935134]Â ? klist_node_init+0x66/0x120
[ÂÂ 10.935134]Â driver_attach+0x3d/0x50
[ÂÂ 10.935134]Â bus_add_driver+0x421/0x5d0
[ÂÂ 10.935134]Â driver_register+0x18c/0x420
[ÂÂ 10.935134]Â __pci_register_driver+0x1a8/0x270
[ÂÂ 10.935134]Â ide_scan_pcibus+0x20b/0x26d
[ÂÂ 10.935134]Â ? piix_ide_init+0x15d/0x15d
[ÂÂ 10.935134]Â do_one_initcall+0xd1/0x3b0
[ÂÂ 10.935134]Â ? initcall_blacklisted+0x160/0x160
[ÂÂ 10.935134]Â ? __memset+0x27/0x30
[ÂÂ 10.935134]Â ? kasan_unpoison_shadow+0x3b/0x50
[ÂÂ 10.935134]Â kernel_init_freeable+0x4c9/0x659
[ÂÂ 10.935134]Â ? rest_init+0x100/0x100
[ÂÂ 10.935134]Â kernel_init+0x13/0x130
[ÂÂ 10.935134]Â ? rest_init+0x100/0x100
[ÂÂ 10.935134]Â ret_from_fork+0x35/0x40
[ÂÂ 10.964317] kobject_add_internal failed for ide0 with -EEXIST, don't try to register things with the same name in the same directory.
[ÂÂ 10.965504] IDE: ide_register_port: device_register error: -17
[ÂÂ 10.966082] ide0: disabling port
[ÂÂ 11.651191] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[ÂÂ 12.275172] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:01.1/ide1'
[ÂÂ 12.276019] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc3 #5
[ÂÂ 12.276134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[ÂÂ 12.276134] Call Trace:
[ÂÂ 12.276134]Â dump_stack+0x62/0x95
[ÂÂ 12.276134]Â sysfs_warn_dup+0x79/0x90
[ÂÂ 12.276134]Â sysfs_create_dir_ns+0x211/0x290
[ÂÂ 12.276134]Â ? sysfs_create_mount_point+0x80/0x80
[ÂÂ 12.276134]Â ? kernel_init_freeable+0x4c9/0x659
[ÂÂ 12.276134]Â ? kasan_check_read+0x16/0x20
[ÂÂ 12.276134]Â ? _raw_spin_lock+0x8c/0xf0
[ÂÂ 12.276134]Â ? _raw_spin_lock_irq+0xf0/0xf0
[ÂÂ 12.276134]Â ? msleep+0x55/0x80
[ÂÂ 12.276134]Â kobject_add_internal+0x1f7/0x770
[ÂÂ 12.276134]Â kobject_add+0x11f/0x1f0
[ÂÂ 12.276134]Â ? kobject_add_internal+0x770/0x770
[ÂÂ 12.276134]Â ? __kmalloc_track_caller+0x6d/0x250
[ÂÂ 12.276134]Â ? kasan_kmalloc+0x11/0x20
[ÂÂ 12.276134]Â device_add+0x2ca/0x1460
[ÂÂ 12.276134]Â ? kobject_set_name_vargs+0xb4/0x130
[ÂÂ 12.276134]Â ? get_device_parent.isra.13+0x5e0/0x5e0
[ÂÂ 12.276134]Â ? pm_runtime_init+0x341/0x3f0
[ÂÂ 12.276134]Â device_register+0x1a/0x20
[ÂÂ 12.276134]Â ide_host_register+0x965/0x1a20
[ÂÂ 12.276134]Â ide_pci_init_two+0xb63/0x18e0
[ÂÂ 12.276134]Â ? kmem_cache_alloc+0x170/0x200
[ÂÂ 12.276134]Â ? __kernfs_new_node+0xd8/0x610
[ÂÂ 12.276134]Â ? ide_pci_setup_ports+0x920/0x920
[ÂÂ 12.276134]Â ? radix_tree_iter_tag_clear+0x50/0x90
[ÂÂ 12.276134]Â ? idr_alloc_u32+0x1a9/0x340
[ÂÂ 12.276134]Â ? __save_stack_trace+0x82/0x100
[ÂÂ 12.276134]Â ? __fprop_inc_percpu_max+0x1f0/0x1f0
[ÂÂ 12.276134]Â ? devres_free+0x40/0x60
[ÂÂ 12.276134]Â ? idr_alloc_cyclic+0xf2/0x1e0
[ÂÂ 12.276134]Â ? __mutex_lock_slowpath+0x20/0x20
[ÂÂ 12.276134]Â ? mutex_lock+0x88/0xf0
[ÂÂ 12.276134]Â ? kasan_check_read+0x16/0x20
[ÂÂ 12.276134]Â ? rpm_resume+0x1d5/0x1600
[ÂÂ 12.276134]Â ? _raw_spin_lock+0x8c/0xf0
[ÂÂ 12.276134]Â ? rpm_put_suppliers+0x140/0x140
[ÂÂ 12.276134]Â ? kasan_check_read+0x16/0x20
[ÂÂ 12.276134]Â ? _raw_spin_lock_irqsave+0x92/0x100
[ÂÂ 12.276134]Â ? _raw_read_unlock_irq+0x40/0x40
[ÂÂ 12.276134]Â ? mutex_lock+0x88/0xf0
[ÂÂ 12.276134]Â ? __mutex_lock_slowpath+0x20/0x20
[ÂÂ 12.276134]Â ide_pci_init_one+0x16/0x20
[ÂÂ 12.276134]Â piix_init_one+0x4a/0x60
[ÂÂ 12.276134]Â pci_device_probe+0x27c/0x490
[ÂÂ 12.276134]Â really_probe+0x465/0x720
[ÂÂ 12.276134]Â driver_probe_device+0xd1/0x210
[ÂÂ 12.276134]Â __driver_attach+0x214/0x280
[ÂÂ 12.276134]Â ? driver_probe_device+0x210/0x210
[ÂÂ 12.276134]Â bus_for_each_dev+0x11d/0x1e0
[ÂÂ 12.276134]Â ? subsys_dev_iter_exit+0x10/0x10
[ÂÂ 12.276134]Â ? kasan_check_write+0x19/0x20
[ÂÂ 12.276134]Â ? klist_node_init+0x66/0x120
[ÂÂ 12.276134]Â driver_attach+0x3d/0x50
[ÂÂ 12.276134]Â bus_add_driver+0x421/0x5d0
[ÂÂ 12.276134]Â driver_register+0x18c/0x420
[ÂÂ 12.276134]Â __pci_register_driver+0x1a8/0x270
[ÂÂ 12.276134]Â ide_scan_pcibus+0x20b/0x26d
[ÂÂ 12.276134]Â ? piix_ide_init+0x15d/0x15d
[ÂÂ 12.276134]Â do_one_initcall+0xd1/0x3b0
[ÂÂ 12.276134]Â ? initcall_blacklisted+0x160/0x160
[ÂÂ 12.276134]Â ? __memset+0x27/0x30
[ÂÂ 12.276134]Â ? kasan_unpoison_shadow+0x3b/0x50
[ÂÂ 12.276134]Â kernel_init_freeable+0x4c9/0x659
[ÂÂ 12.276134]Â ? rest_init+0x100/0x100
[ÂÂ 12.276134]Â kernel_init+0x13/0x130
[ÂÂ 12.276134]Â ? rest_init+0x100/0x100
[ÂÂ 12.276134]Â ret_from_fork+0x35/0x40
[ÂÂ 12.305202] kobject_add_internal failed for ide1 with -EEXIST, don't try to register things with the same name in the same directory.
[ÂÂ 12.306385] IDE: ide_register_port: device_register error: -17
[ÂÂ 12.306961] ide1: disabling port
[ÂÂ 12.307320] PIIX_IDE: probe of 0000:00:01.1 failed with error -1
[ÂÂ 12.307948] ide-gd driver 1.18
[ÂÂ 12.308280] ide-cd driver 5.00
Zhe
>
>
> diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
> index 63627be0811a..3e13c7c243f4 100644
> --- a/drivers/ide/ide-probe.c
> +++ b/drivers/ide/ide-probe.c
> @@ -778,7 +778,7 @@ static int ide_init_queue(ide_drive_t *drive)
> set = &drive->tag_set;
> set->ops = &ide_mq_ops;
> set->nr_hw_queues = 1;
> - set->queue_depth = 32;
> + set->queue_depth = 1;
> set->reserved_tags = 1;
> set->cmd_size = sizeof(struct ide_request);
> set->numa_node = hwif_to_node(hwif);
>