Re: [PATCH v1 1/5] pwm: mediatek: add a property "mediatek,num-pwms"

[Ryder Lee]

+John

HI John,

On Mon, 2019-01-21 at 16:49 +0800, Uwe Kleine-KÃnig wrote:
> On Sat, Jan 19, 2019 at 10:54:47AM +0800, Ryder Lee wrote:
> > On Fri, 2019-01-18 at 09:43 +0100, Matthias Brugger wrote:
> > >
> > > On 18/01/2019 04:24, Ryder Lee wrote:
> > > > This adds a property "mediatek,num-pwms" to avoid having an endless
> > > > list of compatibles with no differences for the same driver.
> > > >
> > > > Thus, the driver should have backwards compatibility to older DTs.
> > > >
> > > > Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
> > > > ---
> > > > Changes since v1: add some checks for backwards compatibility.
> > > > ---
> > > >  drivers/pwm/pwm-mediatek.c | 27 ++++++++++++++++++---------
> > > >  1 file changed, 18 insertions(+), 9 deletions(-)
> > > >
> > > > diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
> > > > index eb6674c..81b7e5e 100644
> > > > --- a/drivers/pwm/pwm-mediatek.c
> > > > +++ b/drivers/pwm/pwm-mediatek.c
> > > > @@ -55,7 +55,7 @@ enum {
> > > >  };
> > > >
> > > >  struct mtk_pwm_platform_data {
> > > > - unsigned int num_pwms;
> > > > + unsigned int num_pwms;  /* it should not be used in the future SoCs */
> > > >   bool pwm45_fixup;
> > > >   bool has_clks;
> > > >  };
> > > > @@ -226,27 +226,36 @@ static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> > > >
> > > >  static int mtk_pwm_probe(struct platform_device *pdev)
> > > >  {
> > > > - const struct mtk_pwm_platform_data *data;
> > > > + struct device_node *np = pdev->dev.of_node;
> > > >   struct mtk_pwm_chip *pc;
> > > >   struct resource *res;
> > > > - unsigned int i;
> > > > + unsigned int i, num_pwms;
> > > >   int ret;
> > > >
> > > >   pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
> > > >   if (!pc)
> > > >           return -ENOMEM;
> > > >
> > > > - data = of_device_get_match_data(&pdev->dev);
> > > > - if (data == NULL)
> > > > -         return -EINVAL;
> > > > - pc->soc = data;
> > > > + pc->soc = of_device_get_match_data(&pdev->dev);
> > > >
> > > >   res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > >   pc->regs = devm_ioremap_resource(&pdev->dev, res);
> > > >   if (IS_ERR(pc->regs))
> > > >           return PTR_ERR(pc->regs);
> > > >
> > > > - for (i = 0; i < data->num_pwms + 2 && pc->soc->has_clks; i++) {
> > > > + /* Check if we have set 'num-pwms' in DTs. */
> > > > + ret = of_property_read_u32(np, "mediatek,num-pwms", &num_pwms);
> > > > + if (ret < 0) {
> > > > +         /* If no, fallback to use SoC data for backwards compatibility. */
> > > > +         if (pc->soc->num_pwms) {
> > > > +                 num_pwms = pc->soc->num_pwms;
> > >
> > > Maybe that's bike shedding, but I think it would be better to carve out the
> > > num_pwms from the mtk_pwm_platform_data and check against the compatible here.
> >
> > I'm not sure how to properly curve it out? I think we still need this
> > variable to save the specific value for some legacy SoCs (with older
> > DTs).
> 
> I guess he means  something like:
> 
>         if (is_compatible_to_variant_A(dev))
>                 num_pwms = 12;
>         else if (is_compatible_to_variant_B(dev))
>                 num_pwms = 2;
> 
> . In my eyes the bike shed should be light red and I prefer to collect
> the fallback num_pwms in the compatible_data as is to keep the code
> simpler. Maybe rename the member from num_pwms to fallback_num_pwms to
> make it more obvious that it doesn't represent the actually used value.
> 
> > > With a expressive comment it will help other driver developers to not start
> > > adding num_pwms in the platform data in their first attempt.
> >
> > Definitely.
> 
> My suggestion was to add a dev_warn, which IMHO is still better than a
> comment.
> 
> Best regards
> Uwe
> 

Unrelated to this patch: I'm ready to send v2 to allocate the clks array
dynamically, but I guess MT7628 couldn't work in original code.


In mtk_pwm_config():

	clk = pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]; 
	....
	resolution = (u64)NSEC_PER_SEC * 1000;
	do_div(resolution, clk_get_rate(clk));
	....

I think clk should be NULL and resolution is always 0 here. 


Ryder