RE: [v4] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list

[Peng Ma]

>-----Original Message-----
>From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>Sent: 2019å1æ25æ 15:46
>To: Peng Ma <peng.ma@xxxxxxx>; shawnguo@xxxxxxxxxx; axboe@xxxxxxxxx
>Cc: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; Leo Li
><leoyang.li@xxxxxxx>; linux-ide@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
>linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Andy Tang
><andy.tang@xxxxxxx>
>Subject: Re: [v4] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list
>
>Hello!
>
>On 25.01.2019 6:32, Peng Ma wrote:
>
>> Add lxx2160a compatible to bindings documentation.
>
>    lx2160a?
>
[Peng Ma] 
Yes, it is should be lx2160a, thanks very much.
I will change it as soon as possible.
Best Regards,
Peng
>> Signed-off-by: Peng Ma <peng.ma@xxxxxxx>
>> ---
>> changed for V4:
>> 	- add lx2160a compatible to bindings doc
>>
>>   .../devicetree/bindings/ata/ahci-fsl-qoriq.txt     |    2 +-
>>   1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
>b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
>> index 7c3ca0e..9ecc019 100644
>> --- a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
>> +++ b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
>> @@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller
>>   Required properties:
>>     - reg: Physical base address and size of the controller's register area.
>>     - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
>> -    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
>> +    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a, lx2160a, etc.
>>     - clocks: Input clock specifier. Refer to common clock bindings.
>>     - interrupts: Interrupt specifier. Refer to interrupt binding.
>>
>
>MBR, Sergei