Re: [PATCH 1/8] platform/x86: intel_cht_int33fe: Remove connection for the alt mode mux
From: Andy Shevchenko
Date: Mon Jan 28 2019 - 04:46:13 EST
On Fri, Jan 25, 2019 at 3:17 PM Heikki Krogerus
<heikki.krogerus@xxxxxxxxxxxxxxx> wrote:
>
> Driver for fusb302 does not support alternate modes, so the
> connection is not really needed for now. Removing that
> connection description allows us to improve the USB Type-C
> mux API.
>
Acked-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
supposed to go via USB tree.
> Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> ---
> drivers/platform/x86/intel_cht_int33fe.c | 11 ++++-------
> 1 file changed, 4 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
> index 02bc74608cf3..fbd24daa7f8d 100644
> --- a/drivers/platform/x86/intel_cht_int33fe.c
> +++ b/drivers/platform/x86/intel_cht_int33fe.c
> @@ -32,7 +32,7 @@ struct cht_int33fe_data {
> struct i2c_client *fusb302;
> struct i2c_client *pi3usb30532;
> /* Contain a list-head must be per device */
> - struct device_connection connections[5];
> + struct device_connection connections[4];
> };
>
> /*
> @@ -178,12 +178,9 @@ static int cht_int33fe_probe(struct platform_device *pdev)
> data->connections[1].endpoint[0] = "port0";
> data->connections[1].endpoint[1] = "i2c-pi3usb30532";
> data->connections[1].id = "typec-mux";
> - data->connections[2].endpoint[0] = "port0";
> - data->connections[2].endpoint[1] = "i2c-pi3usb30532";
> - data->connections[2].id = "idff01m01";
> - data->connections[3].endpoint[0] = "i2c-fusb302";
> - data->connections[3].endpoint[1] = "intel_xhci_usb_sw-role-switch";
> - data->connections[3].id = "usb-role-switch";
> + data->connections[2].endpoint[0] = "i2c-fusb302";
> + data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
> + data->connections[2].id = "usb-role-switch";
>
> device_connections_add(data->connections);
>
> --
> 2.20.1
>
--
With Best Regards,
Andy Shevchenko