[PATCH v3 2/2] iio:dac:dac7612: device tree bindings
From: Ricardo Ribalda Delgado
Date: Mon Jan 28 2019 - 04:49:58 EST
Bindings for dac7612.
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx>
---
.../bindings/iio/dac/ti,dac7612.txt | 29 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
new file mode 100644
index 000000000000..e1b8158fab35
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
@@ -0,0 +1,29 @@
+* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter
+
+The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed
+12-bit monotonicity performance over the industrial temperature range.
+Is is programmable through an SPI interface.
+
+The internal DACs are loaded when the LOADDACS pin is pulled down.
+
+http://www.ti.com/lit/ds/sbas106/sbas106.pdf
+
+Required Properties:
+- compatible: Should be one of:
+ "ti,dac7612"
+ "ti,dac7612u"
+ "ti,dac7612b"
+- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional Properties:
+- loaddacs-gpios: GPIO descriptor for the LOADDACS pin.
+- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+ dac7612@1 {
+ compatible = "ti,dac7612";
+ reg = <0x1>;
+ loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+ };
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 30ba5435906b..e28e5afaae16 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14882,6 +14882,7 @@ M: Ricardo Ribalda <ricardo@xxxxxxxxxxx>
L: linux-iio@xxxxxxxxxxxxxxx
S: Supported
F: drivers/iio/dac/ti-dac7612.c
+F: Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
M: Hans Verkuil <hverkuil@xxxxxxxxx>
--
2.20.1