Re: [PATCH 1/7] mmc: sdhci: add support for using external DMA devices

From: Faiz Abbas
Date: Mon Jan 28 2019 - 05:40:56 EST

Next message: Hans de Goede: "Re: [PATCH 1/8] platform/x86: intel_cht_int33fe: Remove connection for the alt mode mux"
Previous message: Noralf TrÃnnes: "Re: [PATCH v3 17/23] drm/qxl: use generic fbdev emulation"
In reply to: Chunyan Zhang: "Re: [PATCH 1/7] mmc: sdhci: add support for using external DMA devices"
Next in thread: Chunyan Zhang: "Re: [PATCH 1/7] mmc: sdhci: add support for using external DMA devices"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

On 28/01/19 3:50 PM, Chunyan Zhang wrote:
> On Thu, 24 Jan 2019 at 19:41, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>>
>> On 11/01/19 1:08 PM, Faiz Abbas wrote:
>>> From: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx>
>>>
>>> Some standard SD host controllers can support both external dma
>>> controllers as well as ADMA/SDMA in which the SD host controller
>>> acts as DMA master. TI's omap controller is the case as an example.
>>>
>>> Currently the generic SDHCI code supports ADMA/SDMA integrated in
>>> the host controller but does not have any support for external DMA
>>> controllers implemented using dmaengine, meaning that custom code is
>>> needed for any systems that use an external DMA controller with SDHCI.
>>>
>>> Fixes by Faiz Abbas <faiz_abbas@xxxxxx>:
>>> 1. Map scatterlists before dmaengine_prep_slave_sg()
>>> 2. Use dma_async() functions inside of the send_command() path and
>>> synchronize once at the start of each request.
>>
>> Sorry for the slow reply, but I do have some concerns. Please see the comments.
>>
>>>
>>> Signed-off-by: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx>
>>> Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
>>> ---
>>> drivers/mmc/host/Kconfig | 3 +
>>> drivers/mmc/host/sdhci.c | 266 ++++++++++++++++++++++++++++++++++++++-
>>> drivers/mmc/host/sdhci.h | 8 ++
>>> 3 files changed, 273 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>>> index e26b8145efb3..333292e8ecdd 100644
>>> --- a/drivers/mmc/host/Kconfig
>>> +++ b/drivers/mmc/host/Kconfig
>>> @@ -999,3 +999,6 @@ config MMC_SDHCI_AM654
>>> If you have a controller with this interface, say Y or M here.
>>>
>>> If unsure, say N.
>>> +
>>> +config MMC_SDHCI_EXTERNAL_DMA
>>> + bool
>>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>>> index a22e11a65658..4a9044c06e21 100644
>>> --- a/drivers/mmc/host/sdhci.c
>>> +++ b/drivers/mmc/host/sdhci.c
>>> @@ -14,6 +14,7 @@
>>> */
>>>
>>> #include <linux/delay.h>
>>> +#include <linux/dmaengine.h>
>>> #include <linux/ktime.h>
>>> #include <linux/highmem.h>
>>> #include <linux/io.h>
>>> @@ -1118,6 +1119,226 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
>>> }
>>> }
>>>
>>> +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
>>> +static int sdhci_external_dma_init(struct sdhci_host *host)
>>> +{
>>> + int ret = 0;
>>> + struct mmc_host *mmc = host->mmc;
>>> +
>>> + host->tx_chan = dma_request_chan(mmc->parent, "tx");
>>> + if (IS_ERR(host->tx_chan)) {
>>> + ret = PTR_ERR(host->tx_chan);
>>> + if (ret != -EPROBE_DEFER)
>>> + pr_warn("Failed to request TX DMA channel.\n");
>>> + host->tx_chan = NULL;
>>> + return ret;
>>> + }
>>> +
>>> + host->rx_chan = dma_request_chan(mmc->parent, "rx");
>>> + if (IS_ERR(host->rx_chan)) {
>>> + if (host->tx_chan) {
>>> + dma_release_channel(host->tx_chan);
>>> + host->tx_chan = NULL;
>>> + }
>>> +
>>> + ret = PTR_ERR(host->rx_chan);
>>> + if (ret != -EPROBE_DEFER)
>>> + pr_warn("Failed to request RX DMA channel.\n");
>>> + host->rx_chan = NULL;
>>> + }
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static inline struct dma_chan *
>>> +sdhci_external_dma_channel(struct sdhci_host *host, struct mmc_data *data)
>>> +{
>>> + return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan;
>>> +}
>>> +
>>> +static int sdhci_external_dma_setup(struct sdhci_host *host,
>>> + struct mmc_command *cmd)
>>> +{
>>> + int ret, i;
>>> + struct dma_async_tx_descriptor *desc;
>>> + struct mmc_data *data = cmd->data;
>>> + struct dma_chan *chan;
>>> + struct dma_slave_config cfg;
>>> + dma_cookie_t cookie;
>>> + int sg_cnt;
>>> +
>>> + if (!host->mapbase)
>>> + return -EINVAL;
>>> +
>>> + cfg.src_addr = host->mapbase + SDHCI_BUFFER;
>>> + cfg.dst_addr = host->mapbase + SDHCI_BUFFER;
>>> + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>>> + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>>> + cfg.src_maxburst = data->blksz / 4;
>>> + cfg.dst_maxburst = data->blksz / 4;
>>> +
>>> + /* Sanity check: all the SG entries must be aligned by block size. */
>>> + for (i = 0; i < data->sg_len; i++) {
>>> + if ((data->sg + i)->length % data->blksz)
>>> + return -EINVAL;
>>> + }
>>> +
>>> + chan = sdhci_external_dma_channel(host, data);
>>> +
>>> + ret = dmaengine_slave_config(chan, &cfg);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + sg_cnt = sdhci_pre_dma_transfer(host, data, COOKIE_MAPPED);
>>> + if (sg_cnt <= 0)
>>> + return -EINVAL;
>>> +
>>> + desc = dmaengine_prep_slave_sg(chan, data->sg, data->sg_len,
>>> + mmc_get_dma_dir(data),
>>> + DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
>>> + if (!desc)
>>> + return -EINVAL;
>>> +
>>> + desc->callback = NULL;
>>> + desc->callback_param = NULL;
>>> +
>>> + cookie = dmaengine_submit(desc);
>>> + if (cookie < 0)
>>> + ret = cookie;
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static void sdhci_external_dma_release(struct sdhci_host *host)
>>> +{
>>> + if (host->tx_chan) {
>>> + dma_release_channel(host->tx_chan);
>>> + host->tx_chan = NULL;
>>> + }
>>> +
>>> + if (host->rx_chan) {
>>> + dma_release_channel(host->rx_chan);
>>> + host->rx_chan = NULL;
>>> + }
>>> +
>>> + sdhci_switch_external_dma(host, false);
>>> +}
>>> +
>>> +static int __sdhci_external_dma_prepare_data(struct sdhci_host *host,
>>> + struct mmc_command *cmd)
>>> +{
>>> + struct mmc_data *data = cmd->data;
>>> +
>>> + host->data_timeout = 0;
>>> +
>>> + if (sdhci_data_line_cmd(cmd))
>>> + sdhci_set_timeout(host, cmd);
>>> +
>>> + WARN_ON(host->data);
>>> +
>>> + /* Sanity checks */
>>> + WARN_ON(data->blksz * data->blocks > 524288);
>>> + WARN_ON(data->blksz > host->mmc->max_blk_size);
>>> + WARN_ON(data->blocks > 65535);
>>> +
>>> + host->flags |= SDHCI_REQ_USE_DMA;
>>> + host->data = data;
>>> + host->data_early = 0;
>>> + host->data->bytes_xfered = 0;
>>> +
>>> + sdhci_set_transfer_irqs(host);
>>> +
>>> + /*
>>> + * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count
>>> + * can be supported, in that case 16-bit block count register must be 0.
>>> + */
>>> + if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
>>> + (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) {
>>> + if (sdhci_readw(host, SDHCI_BLOCK_COUNT))
>>> + sdhci_writew(host, 0, SDHCI_BLOCK_COUNT);
>>> + sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT);
>>> + } else {
>>> + sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
>>> + }
>>
>> It is probably worth factoring out the code that is shared with
>> sdhci_prepare_data() where possible.
>>
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static void sdhci_external_dma_prepare_data(struct sdhci_host *host,
>>> + struct mmc_command *cmd)
>>> +{
>>> + struct mmc_data *data = cmd->data;
>>> +
>>> + if (!data)
>>> + return;
>>
>> Even in the !data case, we still need to set up a timeout for commands with
>> busy waiting. I suggest checking the !data case before calling
>> sdhci_external_dma_prepare_data()
>
> Ok.
>
>>
>>> +
>>> + if (sdhci_external_dma_setup(host, cmd) ||
>>> + __sdhci_external_dma_prepare_data(host, cmd)) {
>>> + sdhci_external_dma_release(host);
>>> + pr_err("%s: Cannot use external DMA, switch to the DMA/PIO which standard SDHCI provides.\n",
>>> + mmc_hostname(host->mmc));
>>> + sdhci_prepare_data(host, cmd);
>>> + }
>>> +}
>>> +
>>> +static void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
>>> + struct mmc_command *cmd)
>>> +{
>>> + struct dma_chan *chan;
>>> +
>>> + if (!cmd->data || cmd->opcode == MMC_SET_BLOCK_COUNT)
>>
>> MMC_SET_BLOCK_COUNT never has cmd->data and so does not need to be checked.
>
> Ok.
>
>>
>>> + return;
>>> +
>>> + sdhci_writew(host, cmd->data->blksz, SDHCI_BLOCK_SIZE);
>>
>> Block size is set in __sdhci_external_dma_prepare_data() so does it need to
>> be set here also.
>
> Ok.

That is BLOCK_COUNT. This is BLOCK_SIZE.

>
>>
>>> + chan = sdhci_external_dma_channel(host, cmd->data);
>>> + if (chan)
>>> + dma_async_issue_pending(chan);
>>> +}
>>> +
>>> +static int sdhci_external_dma_cleanup(struct sdhci_host *host,
>>> + struct mmc_data *data)
>>
>> Please align parameters with open parenthesis
>>
>>> +{
>>> + struct dma_chan *chan = sdhci_external_dma_channel(host, data);
>>> + int ret = 0;
>>> +
>>> + if (chan)
>>> + ret = dmaengine_terminate_async(chan);
>>> +
>>> + return ret;
>>> +}
>>> +#else
>>> +static int sdhci_external_dma_init(struct sdhci_host *host)
>>> +{
>>> + return -EOPNOTSUPP;
>>> +}
>>> +
>>> +static void sdhci_external_dma_release(struct sdhci_host *host)
>>> +{}
>>> +
>>> +static void sdhci_external_dma_prepare_data(struct sdhci_host *host,
>>> + struct mmc_command *cmd)
>>> +{
>>> + /* If MMC_SDHCI_EXTERNAL_DMA not supported, PIO will be used */
>>> + sdhci_prepare_data(host, cmd);
>>> +}
>>> +
>>> +static void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
>>> + struct mmc_command *cmd)
>>> +{}
>>> +
>>> +static int sdhci_external_dma_cleanup(struct sdhci_host *host,
>>> + struct mmc_data *data)
>>
>> Please align parameters with open parenthesis
>>
>>> +{
>>> + return 0;
>>> +}
>>> +#endif
>>> +
>>> +void sdhci_switch_external_dma(struct sdhci_host *host, bool en)
>>> +{
>>> + host->use_external_dma = en;
>>> +}
>>> +EXPORT_SYMBOL_GPL(sdhci_switch_external_dma);
>>> +
>>> static inline bool sdhci_auto_cmd12(struct sdhci_host *host,
>>> struct mmc_request *mrq)
>>> {
>>> @@ -1374,7 +1595,10 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
>>> host->data_cmd = cmd;
>>> }
>>>
>>> - sdhci_prepare_data(host, cmd);
>>> + if (host->use_external_dma)
>>
>> As mentioned above wrt sdhci_external_dma_prepare_data():
>>
>> if (host->use_external_dma && cmd->data)
>>
>
> Maybe we should move checking the !data case out of both
> _prepare_data, and add it to sdhci_send_command() before calling
> _prepare_data(), that's saying we can do set up a timeout in
> sdhci_send_command().

Lets just factor out everything in common as Adrian said. The !data,
BLOCK_COUNT writes and busy waiting.

>
>>> + sdhci_external_dma_prepare_data(host, cmd);
>>> + else
>>> + sdhci_prepare_data(host, cmd);
>>>
>>> sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
>>>
>>> @@ -1416,6 +1640,9 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
>>> timeout += 10 * HZ;
>>> sdhci_mod_timer(host, cmd->mrq, timeout);
>>>
>>> + if (host->use_external_dma)
>>> + sdhci_external_dma_pre_transfer(host, cmd);
>>
>> Why is sdhci_external_dma_pre_transfer() needed here - couldn't it be done
>> in sdhci_external_dma_prepare_data()?
>>
>
> I'm not sure dma_async_issue_pending() can be done so early in
> sdhci_external_dma_prepare_data().
>
>>> +
>>> sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
>>> }
>>> EXPORT_SYMBOL_GPL(sdhci_send_command);
>>> @@ -1781,6 +2008,11 @@ void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
>>>
>>> sdhci_led_activate(host);
>>>
>>> + if (host->use_external_dma && mrq->data) {
>>> + struct dma_chan *chan = sdhci_external_dma_channel(host,
>>> + mrq->data);
>>
>> sdhci_external_dma_channel is not declared if
>> !IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
>
> Ok, I guess this can be moved to sdhci_external_dma_prepare_data().

No. We have to synchronize from a guaranteed non-atomic context. Maybe
add another empty sdhci_external_dma_channel definition in the #else part?

>
>>
>>> + dmaengine_synchronize(chan);
>>
>> So this is to cover for using dmaengine_terminate_async()?

Yes.

>
> Ok.
>
>>
>>> + }
>>> /*
>>> * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED
>>> * requests if Auto-CMD12 is enabled.
>>> @@ -2658,6 +2890,8 @@ static bool sdhci_request_done(struct sdhci_host *host)
>>> dma_unmap_sg(mmc_dev(host->mmc), data->sg,
>>> data->sg_len,
>>> mmc_get_dma_dir(data));
>>> + if (host->use_external_dma)
>>> + sdhci_external_dma_cleanup(host, data);
>>
>> Is sdhci_external_dma_cleanup() only needed in the error case?
>>
>> The DMA must be stopped before the memory is unmapped and potentially freed.
>>
>> Isn't the DMA cleanup also needed in the bounce buffer case?
>>
>> Isn't the DMA cleanup also needed in the COOKIE_PRE_MAPPED case?
>>
>> dmaengine_terminate_async() doesn't stop the DMA but
>> dmaengine_terminate_sync() is not atomic, which looks like a problem.
>>
>> Perhaps you look at scheduling some work for the external dma error case
>> instead of calling __sdhci_finish_mrq()? Then the work can do the
>> dmaengine_terminate_sync() and call __sdhci_finish_mrq().
>
> Ok, I will look at these issues.
>
>>
>>> }
>>> data->host_cookie = COOKIE_UNMAPPED;
>>> }
>>> @@ -3692,12 +3926,15 @@ int sdhci_setup_host(struct sdhci_host *host)
>>> mmc_hostname(mmc), host->version);
>>> }
>>>
>>> - if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
>>> + if (host->quirks & SDHCI_QUIRK_FORCE_DMA) {
>>> host->flags |= SDHCI_USE_SDMA;
>>> - else if (!(host->caps & SDHCI_CAN_DO_SDMA))
>>> + } else if (!(host->caps & SDHCI_CAN_DO_SDMA)) {
>>> DBG("Controller doesn't have SDMA capability\n");
>>> - else
>>> + } else if (host->use_external_dma) {
>>> + /* Using dma-names to detect external dma capability */
>>> + } else {
>>> host->flags |= SDHCI_USE_SDMA;
>>> + }
>>
>> These if-statements are about setting SDHCI_USE_SDMA but why is a change
>> needed for the host->use_external_dma case?
>
> Yes, this is not needed, otherwise the controller cannot switch back
> to SDMA if it is supported in the controller.

The else case means that the host always uses SDMA. Needed to make sure
this doesn't happen in the external_dma case. Its not SDHCI_CAN_DO_SDMA,
its SDHCI_USE_SDMA.

>
>>
>>>
>>> if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
>>> (host->flags & SDHCI_USE_SDMA)) {
>>> @@ -3785,6 +4022,19 @@ int sdhci_setup_host(struct sdhci_host *host)
>>> }
>>> }
>>>
>>> + if (host->use_external_dma) {
>>> + ret = sdhci_external_dma_init(host);
>>> + if (ret == -EPROBE_DEFER)
>>> + goto unreg;
>>> +
>>> + /*
>>> + * Fall back to use the DMA/PIO integrated in standard SDHCI
>>> + * instead of external DMA devices.
>>> + */
>>> + if (ret)
>>> + sdhci_switch_external_dma(host, false);
>>> + }
>>> +
>>> /*
>>> * If we use DMA, then it's up to the caller to set the DMA
>>> * mask, but PIO does not need the hw shim so we set a new
>>> @@ -4201,6 +4451,10 @@ void sdhci_cleanup_host(struct sdhci_host *host)
>>> dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz +
>>> host->adma_table_sz, host->align_buffer,
>>> host->align_addr);
>>> +
>>> + if (host->use_external_dma)
>>> + sdhci_external_dma_release(host);
>>> +
>>> host->adma_table = NULL;
>>> host->align_buffer = NULL;
>>> }
>>> @@ -4247,6 +4501,7 @@ int __sdhci_add_host(struct sdhci_host *host)
>>>
>>> pr_info("%s: SDHCI controller on %s [%s] using %s\n",
>>> mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
>>> + host->use_external_dma ? "External DMA" :
>>> (host->flags & SDHCI_USE_ADMA) ?
>>> (host->flags & SDHCI_USE_64_BIT_DMA) ? "ADMA 64-bit" : "ADMA" :
>>> (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
>>> @@ -4335,6 +4590,9 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
>>> host->adma_table_sz, host->align_buffer,
>>> host->align_addr);
>>>
>>> + if (host->use_external_dma)
>>> + sdhci_external_dma_release(host);
>>> +
>>> host->adma_table = NULL;
>>> host->align_buffer = NULL;
>>> }
>>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
>>> index 6cc9a3c2ac66..7a52823ebef4 100644
>>> --- a/drivers/mmc/host/sdhci.h
>>> +++ b/drivers/mmc/host/sdhci.h
>>> @@ -482,6 +482,7 @@ struct sdhci_host {
>>>
>>> int irq; /* Device IRQ */
>>> void __iomem *ioaddr; /* Mapped address */
>>> + phys_addr_t mapbase; /* physical address base */
>>> char *bounce_buffer; /* For packing SDMA reads/writes */
>>> dma_addr_t bounce_addr;
>>> unsigned int bounce_buffer_size;
>>> @@ -531,6 +532,7 @@ struct sdhci_host {
>>> bool pending_reset; /* Cmd/data reset is pending */
>>> bool irq_wake_enabled; /* IRQ wakeup is enabled */
>>> bool v4_mode; /* Host Version 4 Enable */
>>> + bool use_external_dma; /* Host selects to use external DMA */
>>
>> Please align /**/ with above i.e. use tab

Will fix.

Thanks,
Faiz

Next message: Hans de Goede: "Re: [PATCH 1/8] platform/x86: intel_cht_int33fe: Remove connection for the alt mode mux"
Previous message: Noralf TrÃnnes: "Re: [PATCH v3 17/23] drm/qxl: use generic fbdev emulation"
In reply to: Chunyan Zhang: "Re: [PATCH 1/7] mmc: sdhci: add support for using external DMA devices"
Next in thread: Chunyan Zhang: "Re: [PATCH 1/7] mmc: sdhci: add support for using external DMA devices"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]