[PATCH 2/3] drivers: regulator: qcom: add PMS405 SPMI regulator
From: Jorge Ramirez-Ortiz
Date: Mon Jan 28 2019 - 06:45:32 EST
The PMS405 has 5 HFSMPS and 13 LDO regulators,
This commit adds support for one of the 5 HFSMPS regulators (s3) to
the spmi regulator driver.
The PMIC HFSMPS 430 regulators have 8 mV step size and a voltage
control scheme consisting of two 8-bit registers defining a 16-bit
voltage set point in units of millivolts
S3 controls the cpu voltages (s3 is a buck regulator of type HFS430);
it is therefore required so we can enable voltage scaling for safely
running cpufreq.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
---
drivers/regulator/qcom_spmi-regulator.c | 197 +++++++++++++++++++++++++++++---
1 file changed, 180 insertions(+), 17 deletions(-)
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 53a61fb..6b8dc9c 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -99,6 +99,7 @@ enum spmi_regulator_logical_type {
SPMI_REGULATOR_LOGICAL_TYPE_VS,
SPMI_REGULATOR_LOGICAL_TYPE_BOOST,
SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS,
+ SPMI_REGULATOR_LOGICAL_TYPE_HFS430,
SPMI_REGULATOR_LOGICAL_TYPE_BOOST_BYP,
SPMI_REGULATOR_LOGICAL_TYPE_LN_LDO,
SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS,
@@ -120,6 +121,7 @@ enum spmi_regulator_type {
enum spmi_regulator_subtype {
SPMI_REGULATOR_SUBTYPE_GP_CTL = 0x08,
SPMI_REGULATOR_SUBTYPE_RF_CTL = 0x09,
+ SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a,
SPMI_REGULATOR_SUBTYPE_N50 = 0x01,
SPMI_REGULATOR_SUBTYPE_N150 = 0x02,
SPMI_REGULATOR_SUBTYPE_N300 = 0x03,
@@ -183,6 +185,12 @@ enum spmi_boost_byp_registers {
SPMI_BOOST_BYP_REG_CURRENT_LIMIT = 0x4b,
};
+enum spmi_hfs430_registers {
+ SPMI_HFS430_REG_VOLTAGE_LB = 0x40,
+ SPMI_HFS430_REG_VOLTAGE_VALID_LB = 0x42,
+ SPMI_HFS430_REG_MODE = 0x45,
+};
+
enum spmi_saw3_registers {
SAW3_SECURE = 0x00,
SAW3_ID = 0x04,
@@ -260,20 +268,61 @@ enum spmi_common_control_register_index {
#define SPMI_FTSMPS_STEP_CTRL_DELAY_MASK 0x07
#define SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT 0
-/* Clock rate in kHz of the FTSMPS regulator reference clock. */
+#define SPMI_HFS430_STEP_CTRL_STEP_MASK 0
+#define SPMI_HFS430_STEP_CTRL_STEP_SHIFT 0
+#define SPMI_HFS430_STEP_CTRL_DELAY_MASK 0x3
+#define SPMI_HFS430_STEP_CTRL_DELAY_SHIFT 0
+
+/* Clock rate in kHz of the FTSMPS and HFS430 regulator reference clocks. */
#define SPMI_FTSMPS_CLOCK_RATE 19200
+#define SPMI_HFS430_CLOCK_RATE 1600
/* Minimum voltage stepper delay for each step. */
#define SPMI_FTSMPS_STEP_DELAY 8
+#define SPMI_HFS430_STEP_DELAY 2
#define SPMI_DEFAULT_STEP_DELAY 20
/*
- * The ratio SPMI_FTSMPS_STEP_MARGIN_NUM/SPMI_FTSMPS_STEP_MARGIN_DEN is used to
+ * The ratio SPMI_xxxxx_STEP_MARGIN_NUM/SPMI_xxxxx_STEP_MARGIN_DEN is used to
* adjust the step rate in order to account for oscillator variance.
*/
#define SPMI_FTSMPS_STEP_MARGIN_NUM 4
#define SPMI_FTSMPS_STEP_MARGIN_DEN 5
+#define SPMI_HFS430_STEP_MARGIN_NUM 10
+#define SPMI_HFS430_STEP_MARGIN_DEN 11
+
+#define SPMI_STEP_MASK(__x) SPMI_##__x##_STEP_CTRL_STEP_MASK
+#define SPMI_STEP_SHIFT(__x) SPMI_##__x##_STEP_CTRL_STEP_SHIFT
+#define SPMI_DELAY_MASK(__x) SPMI_##__x##_STEP_CTRL_DELAY_MASK
+#define SPMI_DELAY_SHIFT(__x) SPMI_##__x##_STEP_CTRL_DELAY_SHIFT
+#define SPMI_CLOCK_RATE(__x) SPMI_##__x##_CLOCK_RATE
+#define SPMI_STEP_DELAY(__x) SPMI_##__x##_STEP_DELAY
+#define SPMI_MARGIN_NUM(__x) SPMI_##__x##_STEP_MARGIN_NUM
+#define SPMI_MARGIN_DEN(__x) SPMI_##__x##_STEP_MARGIN_DEN
+
+struct slew_rate_config {
+ unsigned int delay_mask;
+ unsigned int delay_shift;
+ unsigned int step_mask;
+ unsigned int step_shift;
+ unsigned int margin_num;
+ unsigned int margin_den;
+ unsigned int step_delay;
+ unsigned int clock_rate;
+};
+
+#define SLEW_RATE_CONFIG(x) { \
+ .delay_shift = SPMI_DELAY_SHIFT(x), \
+ .delay_mask = SPMI_DELAY_MASK(x), \
+ .step_shift = SPMI_STEP_SHIFT(x), \
+ .step_mask = SPMI_STEP_MASK(x), \
+ .margin_num = SPMI_MARGIN_NUM(x), \
+ .margin_den = SPMI_MARGIN_DEN(x), \
+ .step_delay = SPMI_STEP_DELAY(x), \
+ .clock_rate = SPMI_CLOCK_RATE(x), \
+}
+
/* VSET value to decide the range of ULT SMPS */
#define ULT_SMPS_RANGE_SPLIT 0x60
@@ -472,6 +521,11 @@ static struct spmi_voltage_range ult_pldo_ranges[] = {
SPMI_VOLTAGE_RANGE(0, 1750000, 1750000, 3337500, 3337500, 12500),
};
+/* must be only one range */
+static struct spmi_voltage_range hfs430_ranges[] = {
+ SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000),
+};
+
static DEFINE_SPMI_SET_POINTS(pldo);
static DEFINE_SPMI_SET_POINTS(nldo1);
static DEFINE_SPMI_SET_POINTS(nldo2);
@@ -486,6 +540,7 @@ static DEFINE_SPMI_SET_POINTS(ult_lo_smps);
static DEFINE_SPMI_SET_POINTS(ult_ho_smps);
static DEFINE_SPMI_SET_POINTS(ult_nldo);
static DEFINE_SPMI_SET_POINTS(ult_pldo);
+static DEFINE_SPMI_SET_POINTS(hfs430);
static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
int len)
@@ -653,6 +708,10 @@ spmi_regulator_find_range(struct spmi_regulator *vreg)
range = vreg->set_points->range;
end = range + vreg->set_points->count;
+ /* we know we only have one range for this type */
+ if (vreg->logical_type == SPMI_REGULATOR_LOGICAL_TYPE_HFS430)
+ return range;
+
spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, &range_sel, 1);
for (; range < end; range++)
@@ -1135,6 +1194,82 @@ spmi_regulator_saw_set_voltage(struct regulator_dev *rdev, unsigned selector)
&voltage_sel, true);
}
+#define SPMI_HFS430_MODE_PWM 0x07
+#define SPMI_HFS430_MODE_AUTO 0x06
+
+static unsigned int spmi_regulator_hfs430_get_mode(struct regulator_dev *rdev)
+{
+ struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+ u8 reg;
+ int ret;
+
+ ret = spmi_vreg_read(vreg, SPMI_HFS430_REG_MODE, ®, 1);
+ if (ret) {
+ dev_err(&rdev->dev, "failed to get mode");
+ return ret;
+ }
+
+ if (reg == SPMI_HFS430_MODE_PWM)
+ return REGULATOR_MODE_NORMAL;
+
+ return REGULATOR_MODE_IDLE;
+}
+
+static int spmi_regulator_hfs430_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+ u8 reg = mode == REGULATOR_MODE_NORMAL ? SPMI_HFS430_MODE_PWM :
+ SPMI_HFS430_MODE_AUTO;
+
+ return spmi_vreg_write(vreg, SPMI_HFS430_REG_MODE, ®, 1);
+}
+
+int spmi_regulator_hfs430_get_voltage(struct regulator_dev *rdev)
+{
+ struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+ u8 val[2];
+ int ret, uV;
+
+ ret = spmi_vreg_read(vreg, SPMI_HFS430_REG_VOLTAGE_VALID_LB, val, 2);
+ if (ret) {
+ dev_err(&rdev->dev, "failed to get voltage");
+ return ret;
+ }
+
+ uV = 1000 * (((unsigned int) val[1] << 8) | val[0]);
+ dev_dbg(&rdev->dev, "read = %d", uV);
+
+ return uV;
+}
+
+static int spmi_regulator_hfs430_set_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+ const struct spmi_voltage_range *range;
+ int uV, vlevel;
+ u8 val[2];
+
+ range = spmi_regulator_find_range(vreg);
+ if (!range)
+ return -EINVAL;
+
+ uV = spmi_regulator_common_list_voltage(rdev, selector);
+ if (uV <= 0)
+ return uV;
+
+ vlevel = roundup(uV, range->step_uV) / 1000;
+
+ dev_dbg(&rdev->dev, "write (%d, %d), mode (%d)", uV, vlevel,
+ spmi_regulator_hfs430_get_mode(rdev));
+
+ val[0] = vlevel & 0xFF;
+ val[1] = (vlevel >> 8) & 0xFF;
+
+ return spmi_vreg_write(vreg, SPMI_HFS430_REG_VOLTAGE_LB, val, 2);
+}
+
static struct regulator_ops spmi_saw_ops = {};
static struct regulator_ops spmi_smps_ops = {
@@ -1264,12 +1399,24 @@ static struct regulator_ops spmi_ult_ldo_ops = {
.set_soft_start = spmi_regulator_common_set_soft_start,
};
+static struct regulator_ops spmi_hfs430_ops = {
+ /* always on regulators */
+ .set_voltage_sel = spmi_regulator_hfs430_set_voltage,
+ .set_voltage_time_sel = spmi_regulator_set_voltage_time_sel,
+ .get_voltage = spmi_regulator_hfs430_get_voltage,
+ .map_voltage = spmi_regulator_common_map_voltage,
+ .list_voltage = spmi_regulator_common_list_voltage,
+ .get_mode = spmi_regulator_hfs430_get_mode,
+ .set_mode = spmi_regulator_hfs430_set_mode,
+};
+
/* Maximum possible digital major revision value */
#define INF 0xFF
static const struct spmi_regulator_mapping supported_regulators[] = {
- /* type subtype dig_min dig_max ltype ops setpoints hpm_min */
+ /* type subtype dig_min dig_max ltype ops setpoints hpm_min */
SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000),
+ SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000),
SPMI_VREG(LDO, N300, 0, INF, LDO, ldo, nldo1, 10000),
SPMI_VREG(LDO, N600, 0, 0, LDO, ldo, nldo2, 10000),
SPMI_VREG(LDO, N1200, 0, 0, LDO, ldo, nldo2, 10000),
@@ -1396,8 +1543,12 @@ static int spmi_regulator_init_slew_rate(struct spmi_regulator *vreg)
{
int ret;
u8 reg = 0;
- int step, delay, slew_rate, step_delay;
+ int step, delay, slew_rate;
const struct spmi_voltage_range *range;
+ struct slew_rate_config *config, configs[] = {
+ [0] = SLEW_RATE_CONFIG(HFS430),
+ [1] = SLEW_RATE_CONFIG(FTSMPS),
+ };
ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_STEP_CTRL, ®, 1);
if (ret) {
@@ -1410,25 +1561,26 @@ static int spmi_regulator_init_slew_rate(struct spmi_regulator *vreg)
return -EINVAL;
switch (vreg->logical_type) {
- case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS:
- step_delay = SPMI_FTSMPS_STEP_DELAY;
+ case SPMI_REGULATOR_LOGICAL_TYPE_HFS430:
+ config = &configs[0];
break;
default:
- step_delay = SPMI_DEFAULT_STEP_DELAY;
- break;
- }
+ config = &configs[1];
+ if (vreg->logical_type != SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS)
+ config->step_delay = SPMI_STEP_DELAY(DEFAULT);
+ };
- step = reg & SPMI_FTSMPS_STEP_CTRL_STEP_MASK;
- step >>= SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT;
+ step = reg & config->step_mask;
+ step >>= config->step_shift;
- delay = reg & SPMI_FTSMPS_STEP_CTRL_DELAY_MASK;
- delay >>= SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT;
+ delay = reg & config->delay_mask;
+ delay >>= config->delay_shift;
/* slew_rate has units of uV/us */
- slew_rate = SPMI_FTSMPS_CLOCK_RATE * range->step_uV * (1 << step);
- slew_rate /= 1000 * (step_delay << delay);
- slew_rate *= SPMI_FTSMPS_STEP_MARGIN_NUM;
- slew_rate /= SPMI_FTSMPS_STEP_MARGIN_DEN;
+ slew_rate = config->clock_rate * range->step_uV * (1 << step);
+ slew_rate /= 1000 * (config->step_delay << delay);
+ slew_rate *= config->margin_num;
+ slew_rate /= config->margin_den;
/* Ensure that the slew rate is greater than 0 */
vreg->slew_rate = max(slew_rate, 1);
@@ -1445,6 +1597,9 @@ static int spmi_regulator_init_registers(struct spmi_regulator *vreg,
type = vreg->logical_type;
+ if (type == SPMI_REGULATOR_LOGICAL_TYPE_HFS430)
+ return 0;
+
ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, ctrl_reg, 8);
if (ret)
return ret;
@@ -1572,9 +1727,11 @@ static int spmi_regulator_of_parse(struct device_node *node,
case SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS:
case SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS:
case SPMI_REGULATOR_LOGICAL_TYPE_SMPS:
+ case SPMI_REGULATOR_LOGICAL_TYPE_HFS430:
ret = spmi_regulator_init_slew_rate(vreg);
if (ret)
return ret;
+
default:
break;
}
@@ -1731,12 +1888,18 @@ static const struct spmi_regulator_data pmi8994_regulators[] = {
{ }
};
+static const struct spmi_regulator_data pms405_regulators[] = {
+ { "s3", 0x1a00, }, /* supply name in the dts only */
+ { }
+};
+
static const struct of_device_id qcom_spmi_regulator_match[] = {
{ .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
{ .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators },
{ .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
{ .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators },
{ .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators },
+ { .compatible = "qcom,pms405-regulators", .data = &pms405_regulators },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match);
--
2.7.4