Re: [PATCH net-next 5/7] net: phy: marvell10g: Force reading of 2.5/5G PMA extended abilities

[Maxime Chevallier]

Hello Russell,

On Mon, 21 Jan 2019 13:00:30 +0000
Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx> wrote:

>On Mon, Jan 21, 2019 at 01:29:45PM +0100, Maxime Chevallier wrote:
>> Hello Russell,
>> 
>> On Mon, 21 Jan 2019 10:52:06 +0000
>> Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx> wrote:  
>> >It's entirely possible that the 3310 switches to different hardware
>> >blocks for 2.5G and 5G speeds, and reading _just_ the 1.4 register
>> >is not sufficient.  
>> 
>> I agree with you but in that particular case, I think we are reading
>> from the correct device. The datasheet itself says that we should be
>> reading 1.4 and 1.11 as we expect, with 2.5G/5G support being set (these
>> registers are read-only, and the datasheet's values aren't what we
>> actually read).  
>
>No, you missed what I was saying.
>
>The 88x3310 is a hybrid device.  It contains multiple instances of
>each individual device at different offsets in each MMD address space.

Ah I see, I indeed thought you refered to the MMDs. 

[...]

>The exception seems to be the PMA/PMD MMD which I've only discovered
>a single instance.

Yes there only seems to be one. There are some other registers in the
1.0xCxxx range, but those who are documented don't help a lot with
determing wether or not these modes are supported.

I wonder if these values are correctly reported in newer PHY firmware
revisions.

I've checked other PCS instances, but it seems the one at 3.0x0xxx is
the one used in 2.5/5GBASET.

I've tested with other PHYs from this family, it looks like they are
derivatives of the 33x0 design, with the addition/removal of internal
IPs. Since the 2110 returns the correct values and has a similar
design, with the PMA returning the correct abilities, I think we are
reading from the correct instance.

Thanks,

Maxime

-- 
Maxime Chevallier, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com