[PATCH AUTOSEL 4.20 124/304] usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)

[Sasha Levin]

From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>

[ Upstream commit a0678e2eed41e81004308693ac84ea95614b0920 ]

Fix the issue: device doesn't accept LGO_U1/U2:
1. set SW_U1/U2_ACCEPT_ENABLE to eanble controller to accept LGO_U1/U2
    by default;
2. enable/disable controller to initiate requests for transition into
    U1/U2 by SW_U1/U2_REQUEST_ENABLE instead of SW_U1/U2_ACCEPT_ENABLE;

Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/usb/mtu3/mtu3_core.c       | 4 +++-
 drivers/usb/mtu3/mtu3_gadget_ep0.c | 8 ++++----
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index ae70b9bfd797..860693520132 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -578,8 +578,10 @@ static void mtu3_regs_init(struct mtu3 *mtu)
 	if (mtu->is_u3_ip) {
 		/* disable LGO_U1/U2 by default */
 		mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL,
-				SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE |
 				SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE);
+		/* enable accept LGO_U1/U2 link command from host */
+		mtu3_setbits(mbase, U3D_LINK_POWER_CONTROL,
+				SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE);
 		/* device responses to u3_exit from host automatically */
 		mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN);
 		/* automatically build U2 link when U3 detect fail */
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index 25216e79cd6e..3c464d8ae023 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -336,9 +336,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
 
 		lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
 		if (set)
-			lpc |= SW_U1_ACCEPT_ENABLE;
+			lpc |= SW_U1_REQUEST_ENABLE;
 		else
-			lpc &= ~SW_U1_ACCEPT_ENABLE;
+			lpc &= ~SW_U1_REQUEST_ENABLE;
 		mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
 
 		mtu->u1_enable = !!set;
@@ -351,9 +351,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
 
 		lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
 		if (set)
-			lpc |= SW_U2_ACCEPT_ENABLE;
+			lpc |= SW_U2_REQUEST_ENABLE;
 		else
-			lpc &= ~SW_U2_ACCEPT_ENABLE;
+			lpc &= ~SW_U2_REQUEST_ENABLE;
 		mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
 
 		mtu->u2_enable = !!set;
-- 
2.19.1