[RFC/PATCH 5/5] arm64: dts: sdm845: Add OPP table for all qup devices

From: Stephen Boyd
Date: Mon Jan 28 2019 - 20:56:00 EST

Next message: Stephen Boyd: "[RFC/PATCH 3/5] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state"
Previous message: Stephen Boyd: "[RFC/PATCH 1/5] OPP: Don't overwrite rounded clk rate"
In reply to: Stephen Boyd: "[RFC/PATCH 1/5] OPP: Don't overwrite rounded clk rate"
Next in thread: Stephen Boyd: "[RFC/PATCH 3/5] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>

qup has a requirement to vote on the performance state of the CX domain
in sdm845 devices. Add OPP tables for these and also add power-domains
property for all qup instances.

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 115 +++++++++++++++++++++++++++
1 file changed, 115 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 22dc2b2df662..05c4862a195c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -366,6 +366,25 @@
clock-names = "core";
};

+ qup_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x8c0000 0x6000>;
@@ -387,6 +406,8 @@
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -400,6 +421,8 @@
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -411,6 +434,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -424,6 +449,8 @@
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -437,6 +464,8 @@
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -448,6 +477,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -461,6 +492,8 @@
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -474,6 +507,8 @@
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -485,6 +520,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -498,6 +535,8 @@
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -511,6 +550,8 @@
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -522,6 +563,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -535,6 +578,8 @@
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -548,6 +593,8 @@
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -559,6 +606,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -572,6 +621,8 @@
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -585,6 +636,8 @@
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -596,6 +649,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -609,6 +664,8 @@
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -622,6 +679,8 @@
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -633,6 +692,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -646,6 +707,8 @@
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -659,6 +722,8 @@
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -670,6 +735,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
@@ -695,6 +762,8 @@
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -708,6 +777,8 @@
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -719,6 +790,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -732,6 +805,8 @@
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -745,6 +820,8 @@
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -756,6 +833,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -769,6 +848,8 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -782,6 +863,8 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -793,6 +876,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -806,6 +891,8 @@
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -819,6 +906,8 @@
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -830,6 +919,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -843,6 +934,8 @@
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -856,6 +949,8 @@
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -867,6 +962,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -880,6 +977,8 @@
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -893,6 +992,8 @@
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -904,6 +1005,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart13_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -917,6 +1020,8 @@
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -930,6 +1035,8 @@
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -941,6 +1048,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart14_default>;
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -954,6 +1063,8 @@
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -967,6 +1078,8 @@
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -978,6 +1091,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart15_default>;
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
--
Sent by a computer through tubes

Next message: Stephen Boyd: "[RFC/PATCH 3/5] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state"
Previous message: Stephen Boyd: "[RFC/PATCH 1/5] OPP: Don't overwrite rounded clk rate"
In reply to: Stephen Boyd: "[RFC/PATCH 1/5] OPP: Don't overwrite rounded clk rate"
Next in thread: Stephen Boyd: "[RFC/PATCH 3/5] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]