[PATCH 04/10] soc: mediatek: clear the event in cmdq initial flow

[Bibby Hsieh]

GCE hardware stored event information in own internal sysram,
if the initial value in those sysram is not zero value
it will cause a situation that gce can wait the event immediately
after client ask gce to wait event but not really trigger the
corresponding hardware.

In order to make sure that the wait event function is
exactly correct, we need to clear the sysram value in
cmdq initial flow.

Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
---
 drivers/mailbox/mtk-cmdq-mailbox.c       | 5 +++++
 include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
 include/linux/soc/mediatek/mtk-cmdq.h    | 3 ---
 3 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index f6174ca..2b5febd 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -33,6 +33,7 @@
 #define CMDQ_THR_END_ADDR		0x24
 #define CMDQ_THR_WAIT_TOKEN		0x30
 #define CMDQ_THR_PRIORITY		0x40
+#define CMDQ_SYNC_TOKEN_UPDATE		0x68
 
 #define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
 #define CMDQ_THR_ENABLED		0x1
@@ -103,8 +104,12 @@ static void cmdq_thread_resume(struct cmdq_thread *thread)
 
 static void cmdq_init(struct cmdq *cmdq)
 {
+	int i;
+
 	WARN_ON(clk_enable(cmdq->clock) < 0);
 	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
+	for (i = 0; i <= CMDQ_MAX_EVENT; i++)
+		writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
 	clk_disable(cmdq->clock);
 }
 
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index ccb7342..911475da 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -19,6 +19,8 @@
 #define CMDQ_WFE_UPDATE			BIT(31)
 #define CMDQ_WFE_WAIT			BIT(15)
 #define CMDQ_WFE_WAIT_VALUE		0x1
+/** cmdq event maximum */
+#define CMDQ_MAX_EVENT			0x3ff
 
 /*
  * CMDQ_CODE_MASK:
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 54ade13..4e88999 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -13,9 +13,6 @@
 
 #define CMDQ_NO_TIMEOUT		0xffffffffu
 
-/** cmdq event maximum */
-#define CMDQ_MAX_EVENT				0x3ff
-
 struct cmdq_pkt;
 
 struct cmdq_client {
-- 
1.9.1