Re: [2/2] mfd: max77620: Add low battery monitor support

[Billy Laws]

Sure, that's fine with me, will send then this gets accepted. Two
other things: you should probably set the reg to 0 if the property
isn't specified as regmap_add_irqchip sets it to 0xff (basically all
enabled on highest limit), and you haven't updated the dt-bindings.

On Tue, Jan 29, 2019 at 6:52 AM Mark Zhang <markz@xxxxxxxxxx> wrote:
>
> On 1/27/2019 10:54 PM, Billy Laws wrote:
> >  >This patch adds PMIC configurations for low-battery
> >  >monitoring by handling max77620 register CNFGGLBL1.
> >  >
> > It might be an idea to add lbhyst configuration here and support using
> > custom lbdac values to specify a different cutoff point.
>
> Yeah this patch doesn't have support to program LBHYST & LBDAC because
> according to our experiences, we don't have requirement to modify them
> when low battery monitor support added.
>
> I think we can create a new patch to support these 2 fields in the future
> when we really need them. Or you can create a patch if you have requirement
> for them, is this OK to you Billy?
>
> Mark
>
> >
> > See: https://datasheetspdf.com/pdf-file/924230/Maxim/MAX8698C/1  pg 46
> >  >Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
> >  >Signed-off-by: Venkat Reddy Talla <vreddytalla@xxxxxxxxxx>
> >  >Signed-off-by: Mark Zhang <markz@xxxxxxxxxx>
> >  >---
> >  > drivers/mfd/max77620.c | 57 +++++++++++++++++++++++++++++++++++++++++-
> >  > 1 file changed, 56 insertions(+), 1 deletion(-)
> >  >
> >  >diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c
> >  >index f58143103185..9e50d145afd8 100644
> >  >--- a/drivers/mfd/max77620.c
> >  >+++ b/drivers/mfd/max77620.c
> >  >@@ -474,6 +474,57 @@ static int
> > max77620_init_backup_battery_charging(struct max77620_chip *chip)
> >  >  return ret;
> >  > }
> >  >
> >  >+static int max77620_init_low_battery_monitor(struct max77620_chip *chip)
> >  >+{
> >  >+ struct device *dev = chip->dev;
> >  >+ struct device_node *np;
> >  >+ bool pval;
> >  >+ u8 mask = 0;
> >  >+ u8 val = 0;
> >  >+ int ret;
> >  >+
> >  >+ np = of_get_child_by_name(dev->of_node, "low-battery-monitor");
> >  >+ if (!np) {
> >  >+ dev_info(dev, "Low battery monitoring support disabled\n");
> >  >+ return 0;
> >  >+ }
> >  >+
> >  >+ pval = of_property_read_bool(np, "maxim,low-battery-dac-enable");
> >  >+ if (pval) {
> >  >+ mask |= MAX77620_CNFGGLBL1_LBDAC_EN;
> >  >+ val |= MAX77620_CNFGGLBL1_LBDAC_EN;
> >  >+ }
> >  >+
> >  >+ pval = of_property_read_bool(np, "maxim,low-battery-dac-disable");
> >  >+ if (pval)
> >  >+ mask |= MAX77620_CNFGGLBL1_LBDAC_EN;
> >  >+
> >  >+ pval = of_property_read_bool(np, "maxim,low-battery-shutdown-enable");
> >  >+ if (pval) {
> >  >+ mask |= MAX77620_CNFGGLBL1_MPPLD;
> >  >+ val |= MAX77620_CNFGGLBL1_MPPLD;
> >  >+ }
> >  >+
> >  >+ pval = of_property_read_bool(np, "maxim,low-battery-shutdown-disable");
> >  >+ if (pval)
> >  >+ mask |= MAX77620_CNFGGLBL1_MPPLD;
> >  >+
> >  >+ pval = of_property_read_bool(np, "maxim,low-battery-reset-enable");
> >  >+ if (pval) {
> >  >+ mask |= MAX77620_CNFGGLBL1_LBRSTEN;
> >  >+ val |= MAX77620_CNFGGLBL1_LBRSTEN;
> >  >+ }
> >  >+
> >  >+ pval = of_property_read_bool(np, "maxim,low-battery-reset-disable");
> >  >+ if (pval)
> >  >+ mask |= MAX77620_CNFGGLBL1_LBRSTEN;
> >  >+
> >  >+ ret = regmap_update_bits(chip->rmap, MAX77620_REG_CNFGGLBL1, mask, val);
> >  >+ if (ret < 0)
> >  >+ dev_err(dev, "Reg CNFGGLBL1 update failed: %d\n", ret);
> >  >+ return ret;
> >  >+}
> >  >+
> >  > static int max77620_read_es_version(struct max77620_chip *chip)
> >  > {
> >  >  unsigned int val;
> >  >@@ -563,7 +614,11 @@ static int max77620_probe(struct i2c_client *client,
> >  >  if (ret < 0)
> >  >  return ret;
> >  >
> >  >- ret =  devm_mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE,
> >  >+ ret = max77620_init_low_battery_monitor(chip);
> >  >+ if (ret < 0)
> >  >+ return ret;
> >  >+
> >  >+ ret = devm_mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE,
> >  >      mfd_cells, n_mfd_cells, NULL, 0,
> >  >      regmap_irq_get_domain(chip->top_irq_data));
> >  >  if (ret < 0) {
> >