Re: [PATCH v3 1/5] mtd: nand: Always store info about bad block markers in chip struct

[Boris Brezillon]

On Wed, 30 Jan 2019 13:01:44 +0000
Schrempf Frieder <frieder.schrempf@xxxxxxxxxx> wrote:

> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> 
> The information about where the manufacturer puts the bad block
> markers inside the bad block and in the OOB data is stored in
> different places. Let's move this information to nand_chip.options
> and nand_chip.badblockpos.
> 
> As this chip-specific information is not directly related to the
> bad block table (BBT), we also rename the flags to NAND_BBM_*.
> 
> Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> ---
>  drivers/mtd/nand/onenand/onenand_base.c |  2 +-
>  drivers/mtd/nand/onenand/onenand_bbt.c  |  2 +-
>  drivers/mtd/nand/raw/nand_amd.c         |  2 +-
>  drivers/mtd/nand/raw/nand_base.c        | 12 ++++++------
>  drivers/mtd/nand/raw/nand_bbt.c         |  4 ++--
>  drivers/mtd/nand/raw/nand_esmt.c        |  2 +-
>  drivers/mtd/nand/raw/nand_hynix.c       |  4 ++--
>  drivers/mtd/nand/raw/nand_macronix.c    |  2 +-
>  drivers/mtd/nand/raw/nand_micron.c      |  2 +-
>  drivers/mtd/nand/raw/nand_samsung.c     |  4 ++--
>  drivers/mtd/nand/raw/nand_toshiba.c     |  2 +-
>  drivers/mtd/nand/raw/sh_flctl.c         |  4 ++--
>  include/linux/mtd/bbm.h                 | 14 +-------------
>  include/linux/mtd/rawnand.h             | 15 +++++++++++++++

Might be better to split that in 2 patches:
- update onenand logic
- update rawnand logic

>  14 files changed, 37 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
> index 4ca4b194e7d7..d6701b8f031f 100644
> --- a/drivers/mtd/nand/onenand/onenand_base.c
> +++ b/drivers/mtd/nand/onenand/onenand_base.c
> @@ -2458,7 +2458,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
>                  bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
>  
>          /* We write two bytes, so we don't have to mess with 16-bit access */
> -        ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
> +        ofs += mtd->oobsize + (this->badblockpos & ~0x01);

Looks like the ->badblockpos field does not exist in struct
onenand_chip, which means you didn't compile test this part ;-).

>  	/* FIXME : What to do when marking SLC block in partition
>  	 * 	   with MLC erasesize? For now, it is not advisable to
>  	 *	   create partitions containing both SLC and MLC regions.
> diff --git a/drivers/mtd/nand/onenand/onenand_bbt.c b/drivers/mtd/nand/onenand/onenand_bbt.c
> index dde20487937d..880b0abd36c8 100644
> --- a/drivers/mtd/nand/onenand/onenand_bbt.c
> +++ b/drivers/mtd/nand/onenand/onenand_bbt.c
> @@ -191,7 +191,7 @@ static int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
>  		return -ENOMEM;
>  
>  	/* Set the bad block position */
> -	bbm->badblockpos = ONENAND_BADBLOCK_POS;
> +	this->badblockpos = NAND_BBM_POS_ONENAND;

This should be done in onenand_base.c not onenand_bbt.c.

>  
>  	/* Set erase shift */
>  	bbm->bbt_erase_shift = this->erase_shift;

...

> diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c
> index 1b722fe9213c..862eaa3a0552 100644
> --- a/drivers/mtd/nand/raw/nand_bbt.c
> +++ b/drivers/mtd/nand/raw/nand_bbt.c
> @@ -466,7 +466,7 @@ static int create_bbt(struct nand_chip *this, uint8_t *buf,
>  
>  	pr_info("Scanning device for bad blocks\n");
>  
> -	if (bd->options & NAND_BBT_SCAN2NDPAGE)
> +	if (this->options & NAND_BBM_SECONDPAGE)
>  		numpages = 2;
>  	else
>  		numpages = 1;
> @@ -487,7 +487,7 @@ static int create_bbt(struct nand_chip *this, uint8_t *buf,
>  		from = (loff_t)startblock << this->bbt_erase_shift;
>  	}
>  
> -	if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
> +	if (this->bbt_options & NAND_BBM_LASTPAGE)

You're not checking the right field here:

	if (this->options & NAND_BBM_LASTPAGE)

>  		from += mtd->erasesize - (mtd->writesize * numpages);
>  
>  	for (i = startblock; i < numblocks; i++) {