Re: [PATCH v3 2/2] Add device tree binding documentation for MAX44009

[Rob Herring]

On Sun, Jan 27, 2019 at 09:09:14AM -0800, Robert Eshleman wrote:
> This patch adds device tree documentation for the max44009 ambient light sensor.

Wrap long lines.

Follow the subject style used for the directory (git log --oneline 
<dir>). In this case, 'dt-bindings: iio: light: Add max44009'

> 
> Signed-off-by: Robert Eshleman <bobbyeshleman@xxxxxxxxx>
> ---
> Changes to v3:
> - None
> 
> Changes to v2:
> - Clean up style
> 
>  .../bindings/iio/light/max44009.txt           | 25 +++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/light/max44009.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/light/max44009.txt b/Documentation/devicetree/bindings/iio/light/max44009.txt
> new file mode 100644
> index 000000000000..b287d7732e37
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/max44009.txt
> @@ -0,0 +1,25 @@
> +* MAX44009 Ambient Light Sensor
> +
> +Required properties:
> +
> +- compatible: should be "maxim,max44009"
> +- reg: the I2C address of the device (default is <0x4a>)
> +
> +Optional properties:
> +
> +- interrupts: interrupt mapping for GPIO IRQ. Should be configured with
> +  IRQ_TYPE_EDGE_FALLING.
> +
> +Refer to interrupt-controller/interrupts.txt for generic interrupt client
> +node bindings.
> +
> +Example:
> +
> +max44009: max44009@4a {

light-sensor@4a

> +	compatible = "maxim,max44009";
> +	reg = <0x4a>;
> +
> +	interrupt-parent = <&gpio1>;
> +	interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
> +};
> +
> -- 
> 2.20.1
>