Re: [RFC PATCH v3 06/10] devicetree: bindings: Document first ROHM BD70528 bindings

[Rob Herring]

On Wed, Jan 30, 2019 at 11:09:55AM +0200, Matti Vaittinen wrote:
> Document bindings for regulators (3 bucks, 3 LDOs and 2 LED
> drivers) and 4 GPIO pins which can be configured for I/O or
> as interrupt sources withe configurable trigger levels.
> 
> Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/rohm,bd70528-pmic.txt  | 104 +++++++++++++++++++++
>  1 file changed, 104 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> new file mode 100644
> index 000000000000..21801440a53a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> @@ -0,0 +1,104 @@
> +* ROHM BD70528 Power Management Integrated Circuit bindings
> +
> +BD70528MWV is an ultra-low Iq general purpose single-chip power management IC
> +for battery-powered portable devices. The IC integrates 3 ultra-low current
> +consumption buck converters, 3 LDOs and 2 LED Drivers. Also included are 4
> +GPIOs, a real-time clock (RTC), a 32kHz clock gate, high-accuracy VREF
> +for use with an external ADC, flexible dual-input power path, 10 bits SAR ADC
> +for battery temperature monitor and 1S battery charger with scalable charge
> +currents.
> +
> +Required properties:
> + - compatible		: Should be "rohm,bd70528"
> + - reg			: I2C slave address.
> + - interrupt-parent	: Phandle to the parent interrupt controller.

Don't document this. It is implied and could be in a parent node.

> + - interrupts		: The interrupt line the device is connected to.
> + - interrupt-controller	: To indicate bd70528 acts as an interrupt controller.
> + - #interrupt-cells	: Should be 2. usage is compliant to the 2 cells
> +			  variant of ../interrupt-controller/interrupts.txt
> + - gpio-controller	: To indicate bd70528 acts as a gpio controller.
> + - #gpio-cells		: Should be 2. The first cell is the pin number and
> +			  the second cell is used to specify flags. See
> +			  ../gpio/gpio.txt for more information.
> + - clock-frequency	: Should be 32768

Forget to drop this?

> + - #clock-cells		: Should be 0.
> + - regulators:		: List of child nodes that specify the regulators.
> +			  Please see ../regulator/rohm,bd70528-regulator.txt
> +
> +Optional properties:
> + - clock-output-names	: Should contain name for output clock.
> +
> +Example:
> +/* external oscillator */
> +osc: oscillator {
> +	compatible = "fixed-clock";
> +	#clock-cells = <1>;
> +	clock-frequency  = <32768>;
> +	clock-output-names = "osc";
> +};
> +
> +pmic: bd70528@4b {

pmic@4b

Node names should be generic.

> +	compatible = "rohm,bd70528";
> +	reg = <0x4b>;
> +	interrupt-parent = <&gpio1>;
> +	interrupts = <29 GPIO_ACTIVE_LOW>;
> +	clocks = <&osc 0>;
> +	#clock-cells = <0>;
> +	clock-output-names = "bd70528-32k-out";
> +	#gpio-cells = <2>;
> +	gpio-controller;
> +	interrupt-controller;
> +	#interrupt-cells = <2>;
> +
> +	regulators {
> +		buck1: BUCK1 {
> +			regulator-name = "buck1";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <3400000>;
> +			regulator-boot-on;
> +			regulator-ramp-delay = <125>;
> +		};
> +		buck2: BUCK2 {
> +			regulator-name = "buck2";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-boot-on;
> +			regulator-ramp-delay = <125>;
> +		};
> +		buck3: BUCK3 {
> +			regulator-name = "buck3";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-boot-on;
> +			regulator-ramp-delay = <250>;
> +		};
> +		ldo1: LDO1 {
> +			regulator-name = "ldo1";
> +			regulator-min-microvolt = <1650000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-boot-on;
> +		};
> +		ldo2: LDO2 {
> +			regulator-name = "ldo2";
> +			regulator-min-microvolt = <1650000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-boot-on;
> +		};
> +
> +		ldo3: LDO3 {
> +			regulator-name = "ldo3";
> +			regulator-min-microvolt = <1650000>;
> +			regulator-max-microvolt = <3300000>;
> +		};
> +		led_ldo1: LED_LDO1 {
> +			regulator-name = "led_ldo1";
> +			regulator-min-microvolt = <200000>;
> +			regulator-max-microvolt = <300000>;
> +		};
> +		led_ldo2: LED_LDO2 {
> +			regulator-name = "led_ldo2";
> +			regulator-min-microvolt = <200000>;
> +			regulator-max-microvolt = <300000>;
> +		};
> +	};
> +};
> -- 
> 2.14.3
> 
> 
> -- 
> Matti Vaittinen
> ROHM Semiconductors Finland SWDC
> Kiviharjunlenkki 1E
> 90220 OULU
> FINLAND
> 
> ~~~ "I don't think so," said Rene Descartes.  Just then, he vanished ~~~