Re: [PATCH v2 0/2] USB SS PHY for Qualcomm's QCS404

[Rob Herring]

On Tue, Jan 29, 2019 at 12:35:13PM +0100, Jorge Ramirez-Ortiz wrote:
> This set adds USB SS PHY support to Qualcomm's QCS404 SoC
> The PHY is implemented using Synopsys SS PHY 1.0.0 IP
> 
> The code is losely based on Sriharsha Allenki's
> <sallenki@xxxxxxxxxxxxxx> original implementation.
> 
> v2:
>   enable OTG mode detection
>   move vdd voltage levels to driver
>   use bulk_ control interfaces
>   ss-phy-bindings [1]
> 
> [1] ss-phy-binding discussion:
>  - qcom,dwc3-ss-usb-phy exist for a generic usb2/usb3 phy driver that
>  was never merged. Rather than trying to re-use these bindings (or
>  delete them) I  propose that we go ahead with the new separate
>  bindings for HS and SS: if  not now - investigation  in progress- in
>  the  future  it might be  possible to have again a common phy driver
>  for  which these old  bindings would be the binding agreement. 

Either use/extend the old binding or remove it if it is not being used.

Rob