[PATCH v2 0/7] add support for SAM9X60 pin controller

[Claudiu.Beznea]

From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

This series adds drive strenght and slew rate support for SAMX60's pin
controller. For drive strenght we could have 2 values: low, high.
For slew rate we could have 2 values: enable, disabled.

Besides this I took the chance and adapt the documentation for at91 pinctrl
driver.

Changes in v2:
- s/microchip,sam9x60-pictrl/microchip,sam9x60-pinctrl in patches 3/7, 5/7

Claudiu Beznea (7):
  pinctrl: at91: add option to use drive strength bits
  pinctrl: at91: add drive strength support for SAM9X60
  pinctrl: at91: add compatibles for SAM9X60 pin controller
  dt-bindings: add documentation for banks
  dt-bindings: add bindings for SAM9X60
  pinctrl: at91: add slewrate support for SAM9X60
  dt-bindings: add documentation for slew rate

 .../bindings/pinctrl/atmel,at91-pinctrl.txt        |  27 ++++-
 drivers/pinctrl/pinctrl-at91.c                     | 134 +++++++++++++++++++--
 drivers/pinctrl/pinctrl-at91.h                     |   3 +
 include/dt-bindings/pinctrl/at91.h                 |   4 +
 4 files changed, 155 insertions(+), 13 deletions(-)

-- 
2.7.4