[PATCH v2 2/2] PCI: pciehp: Disable Data Link Layer State Changed event on suspend

[Mika Westerberg]

Commit 0e157e528604 ("PCI/PME: Implement runtime PM callbacks") tried to
solve an issue where the hierarchy immediately wakes up when it is
transitioned into D3cold. However, it turns out to prevent PME
propagation on some systems that do not support D3cold.

I looked more closely what might cause the immediate wakeup. It happens
when the ACPI power resource of the root port is turned off. The AML
code associated with the _OFF() method of the ACPI power resource
executes PCIe L2/3 ready transition and waits for it to complete. Right
after the L2/3 ready transition is started the root port receives PME
from the downstream port.

The simplest hierarchy where this happens looks like this:

  00:1d.0 PCIe Root port
    ^
    |
    v
    05:00.0 PCIe switch #1 upstream port
      06:01.0 PCIe switch #1 downstream hotplug port
        ^
        |
        v
        08:00.0 Pcie switch #2 upstream port

It seems that the PCIe link between the two switches, before
PME_Turn_Off/PME_TO_Ack is complete for the whole hierarchy, goes
inactive and triggers PME towards the root port bringing it back to D0.
The L2/3 ready sequence is described in PCIe r4.0 spec sections 5.2 and
5.3.3 but unfortunately they do not state what happens if DLLSCE is
enabled during the sequence.

Disabling Data Link Layer State Changed event (DLLSCE) seems to prevent
the issue and still allows the downstream hotplug port to notice when a
device is plugged/unplugged.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=202103
Fixes: 0e157e528604 ("PCI/PME: Implement runtime PM callbacks")
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
---
 drivers/pci/hotplug/pciehp_hpc.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index cd9eae650aa5..8bfcb8cd0900 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -736,12 +736,25 @@ void pcie_clear_hotplug_events(struct controller *ctrl)
 
 void pcie_enable_interrupt(struct controller *ctrl)
 {
-	pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_HPIE, PCI_EXP_SLTCTL_HPIE);
+	u16 mask;
+
+	mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE;
+	pcie_write_cmd(ctrl, mask, mask);
 }
 
 void pcie_disable_interrupt(struct controller *ctrl)
 {
-	pcie_write_cmd(ctrl, 0, PCI_EXP_SLTCTL_HPIE);
+	u16 mask;
+
+	/*
+	 * Mask hot-plug interrupt to prevent it triggering immediately
+	 * when the link goes inactive (we still get PME when any of the
+	 * enabled events is detected). Same goes with Link Layer State
+	 * changed event which generates PME immediately when the link goes
+	 * inactive so mask it as well.
+	 */
+	mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE;
+	pcie_write_cmd(ctrl, 0, mask);
 }
 
 /*
-- 
2.20.1