[PATCH] pinctrl: qcom: qcs404: Drop unused UFS_RESET macro
From: Bjorn Andersson
Date: Thu Jan 31 2019 - 12:39:11 EST
The UFS_RESET macro serves no purpose on QCS404, remove it.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
drivers/pinctrl/qcom/pinctrl-qcs404.c | 25 -------------------------
1 file changed, 25 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-qcs404.c b/drivers/pinctrl/qcom/pinctrl-qcs404.c
index 4ffd56ff809e..1c6ba978c69f 100644
--- a/drivers/pinctrl/qcom/pinctrl-qcs404.c
+++ b/drivers/pinctrl/qcom/pinctrl-qcs404.c
@@ -95,31 +95,6 @@ enum {
.intr_detection_width = -1, \
}
-#define UFS_RESET(pg_name, offset) \
- { \
- .name = #pg_name, \
- .pins = pg_name##_pins, \
- .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \
- .ctl_reg = offset, \
- .io_reg = offset + 0x4, \
- .intr_cfg_reg = 0, \
- .intr_status_reg = 0, \
- .intr_target_reg = 0, \
- .tile = NORTH, \
- .mux_bit = -1, \
- .pull_bit = 3, \
- .drv_bit = 0, \
- .oe_bit = -1, \
- .in_bit = -1, \
- .out_bit = 0, \
- .intr_enable_bit = -1, \
- .intr_status_bit = -1, \
- .intr_target_bit = -1, \
- .intr_raw_status_bit = -1, \
- .intr_polarity_bit = -1, \
- .intr_detection_bit = -1, \
- .intr_detection_width = -1, \
- }
static const struct pinctrl_pin_desc qcs404_pins[] = {
PINCTRL_PIN(0, "GPIO_0"),
PINCTRL_PIN(1, "GPIO_1"),
--
2.18.0