Re: Linux Kernel Regression: HAPS quirk breaks PCIe on i.MX6QP

[Thinh Nguyen]

Hi Lukas,

Lukas Hartmann wrote:
> Hi Thinh,
>
> this is in a taped out i.MX6QP 1.2GHz SoC, I also confirmed it with the 1.0GHz version, it has the same 0xabcd device id integrated.

I see.

> I will try your patch ASAP.

Thank you.
Thinh


>
>> On 1. Feb 2019, at 00:46, Thinh Nguyen <thinh.nguyen@xxxxxxxxxxxx> wrote:
>>
>> Hi Lukas,
>>
>> Thinh Nguyen wrote:
>>> Bjorn Helgaas wrote:
>>>> [+cc linux-pci, linux-kernel]
>>>>
>>>>> On Thu, Jan 31, 2019 at 11:21 AM Lukas F. Hartmann <lukas@xxxxxxxxx> wrote:
>>>>> Hi Thinh,
>>>>>
>>>>> I'm writing you because you're the author in this commit:
>>>>> https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_torvalds_linux_commit_03e6742584af8866ba014874669d0440bed3a623&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=VKipRJmm95P2RbIxyKKYrcUCOGNlQtjlV-5zhrVhIik&m=2sOrowYXlsC3rl0LfHQhIZzImag0jFZXGvR6NIQDsh8&s=oJoBWRE8_LGAYbX2alh6QnjYZTTmzcgLw4MtOMToNyo&e=
>>>>>
>>>>> This quirk workaround breaks the PCIe on i.MX6QP, at least on my test
>>>>> devices. The reason is because the Synposys PCIe IP in i.MX6QP has the
>>>>> same device ID as the HAPS USB3 controller you are targeting in the
>>>>> commit: 0xabcd.
>>>>>
>>>>> Definition:
>>>>>
>>>>> https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_torvalds_linux_blob_master_include_linux_pci-5Fids.h-23L2364&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=VKipRJmm95P2RbIxyKKYrcUCOGNlQtjlV-5zhrVhIik&m=2sOrowYXlsC3rl0LfHQhIZzImag0jFZXGvR6NIQDsh8&s=-FVCwe81XNjJsYHYk1w-kdAzSOLunTGeNc73azO2QYw&e=
>>>>>
>>>>> Here is a bit of lspci output on my i.MX6QP machine (without the problem):
>>>>>
>>>>> mntmn@reform:~/code/linux$ lspci -v
>>>>> 00:00.0 PCI bridge: Synopsys, Inc. Device abcd (rev 01) (prog-if 00
>>>>>                                          ^^^^
>>>>> [Normal decode])
>>>>>        Flags: bus master, fast devsel, latency 0, IRQ 307
>>>>>        Memory at 01000000 (32-bit, non-prefetchable) [size=1M]
>>>>>        Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
>>>>> ...
>>>>>
>>>>> The failure mode is that the PCIe controller shows up as a USB
>>>>> controller and my ath9k wireless PCIe card cannot be assigned the
>>>>> proper resources anymore (-ENOMEM even for very small BARs).
>>>>>
>>>>> Reverting this commit fixes the problem for me. I suggest to make the
>>>>> check more specific to the platform/chipset you are targeting.
>>>> So Synopsys apparently re-used Device ID 0xabcd?  That's a pretty bad problem.
>>>>
>>>> It looks like we merged 03e6742584af ("PCI: Override Synopsys USB 3.x
>>>> HAPS device class") for v5.0, and v5.0-final hasn't been released yet,
>>>> so if we don't hear from Thinh with a resolution, we can still revert
>>>> it.
>>>>
>>>> I set myself a reminder to revert this on Feb 11, but hopefully we'll
>>>> have a better resolution before then.
>>>>
>>>> Bjorn
>>>>
>>> This is really odd that the PID for the PCIe controller in i.MX6QP is
>>> the same as PID Synopsys use for USB controller. We use a different set
>>> of PIDs for PCIe controllers and track VID and PID in our releases.
>>>
>>> Is the Root Complex (00:00.0) part of the SoC? Or is this a Synopsys
>>> prototype connected to your board? If it is the latter, then the FPGA
>>> configuration needs to be updated to other PID.
>>>