Re: [PATCH v4 2/2] dt-bindings: iio: light: Add max44009

[Jonathan Cameron]

On Thu, 31 Jan 2019 07:49:16 -0800
Robert Eshleman <bobbyeshleman@xxxxxxxxx> wrote:

> Adds device tree bindings for the max44009 light sensor.
> 
> Signed-off-by: Robert Eshleman <bobbyeshleman@xxxxxxxxx>

Still time for Rob to comment if he want's to, but I think
with few tweaks as below this matches what he asked for.

Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.

Thanks,

Jonathan

> ---
> Changes to v4:
> - Add subsystem to subject line
> - Change node name to be 'light-sensor' 
> - Clean up style
> 
> Changes to v3:
> - None
> 
> Changes to v2:
> - Clean up style
> 
>  .../bindings/iio/light/max44009.txt           | 25 +++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/light/max44009.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/light/max44009.txt b/Documentation/devicetree/bindings/iio/light/max44009.txt
> new file mode 100644
> index 000000000000..557297c86fba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/max44009.txt
> @@ -0,0 +1,25 @@
> +* MAX44009 Ambient Light Sensor
> +
> +Required properties:
> +
> +- compatible: should be "maxim,max44009"
> +- reg: the I2C address of the device (default is <0x4a>)
> +
> +Optional properties:
> +
> +- interrupts: interrupt mapping for GPIO IRQ. Should be configured with
> +  IRQ_TYPE_EDGE_FALLING.
> +
> +Refer to interrupt-controller/interrupts.txt for generic interrupt client
> +node bindings.
> +
> +Example:
> +
> +max44009: light-sensor@4a {
The label is only useful if something is going to cross reference it.
Can't see that happening so dropped it. Above now reads.

light-sensor@4a {


> +	compatible = "maxim,max44009";
> +	reg = <0x4a>;
> +
> +	interrupt-parent = <&gpio1>;
> +	interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
> +};
> +
Cleaned up extra entirely blank line at end of file.