Re: [PATCH v2 03/14] dt-binding: irqchip: Add pruss-intc-irq driver for PRUSS interrupts

[Tony Lindgren]

* Roger Quadros <rogerq@xxxxxx> [190204 14:23]:
> From: "Andrew F. Davis" <afd@xxxxxx>
> 
> The Programmable Real-Time Unit Subsystem (PRUSS) contains an
> interrupt controller (INTC) that can handle various system input
> events and post interrupts back to the device-level initiators.
> The INTC can support upto 64 input events with individual control
> configuration and hardware prioritization. These events are mapped
> onto 10 interrupt signals through two levels of many-to-one mapping
> support. Different interrupt signals are routed to the individual
> PRU cores or to the host CPU.
> 
> The PRUSS INTC platform driver manages this PRUSS interrupt
> controller and implements an irqchip driver to provide a Linux
> standard way for the PRU client users to enable/disable/ack/
> re-trigger a PRUSS system event. The system events to interrupt
> channels and host interrupts relies on the mapping configuration
> provided through a firmware resource table for now. This will be
> revisited and enhanced in the future for a better interface. The
> mappings will currently be programmed during the boot/shutdown
> of the PRU.

Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>