Re: [PATCH 05/35] ARM: davinci: drop irq defines from default_priorites

[David Lechner]

On 1/31/19 7:38 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
>
> In order to select SPARSE_IRQ we need to make the interrupt numbers
> dynamic (at least at build-time for the top-level controller). The
> interrupt numbers are used as array indexes for irq priorities.
>
> Drop the defines and just initialize the arrays in a linear manner.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> ---

...

> -static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
> -	[IRQ_DM355_CCDC_VDINT0]		= 2,
> -	[IRQ_DM355_CCDC_VDINT1]		= 6,
> -	[IRQ_DM355_CCDC_VDINT2]		= 6,
> -	[IRQ_DM355_IPIPE_HST]		= 6,
> -	[IRQ_DM355_H3AINT]		= 6,
> -	[IRQ_DM355_IPIPE_SDR]		= 6,
> -	[IRQ_DM355_IPIPEIFINT]		= 6,
> -	[IRQ_DM355_OSDINT]		= 7,
> -	[IRQ_DM355_VENCINT]		= 6,
> -	[IRQ_ASQINT]			= 6,
> -	[IRQ_IMXINT]			= 6,
> -	[IRQ_USBINT]			= 4,
> -	[IRQ_DM355_RTOINT]		= 4,
> -	[IRQ_DM355_UARTINT2]		= 7,
> -	[IRQ_DM355_TINT6]		= 7,
> -	[IRQ_CCINT0]			= 5,	/* dma */
> -	[IRQ_CCERRINT]			= 5,	/* dma */
> -	[IRQ_TCERRINT0]			= 5,	/* dma */
> -	[IRQ_TCERRINT]			= 5,	/* dma */
> -	[IRQ_DM355_SPINT2_1]		= 7,
> -	[IRQ_DM355_TINT7]		= 4,
> -	[IRQ_DM355_SDIOINT0]		= 7,
> -	[IRQ_MBXINT]			= 7,
> -	[IRQ_MBRINT]			= 7,
> -	[IRQ_MMCINT]			= 7,
> -	[IRQ_DM355_MMCINT1]		= 7,
> -	[IRQ_DM355_PWMINT3]		= 7,
> -	[IRQ_DDRINT]			= 7,
> -	[IRQ_AEMIFINT]			= 7,
> -	[IRQ_DM355_SDIOINT1]		= 4,
> -	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
> -	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
> -	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
> -	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
> -	[IRQ_PWMINT0]			= 7,
> -	[IRQ_PWMINT1]			= 7,
> -	[IRQ_PWMINT2]			= 7,
> -	[IRQ_I2C]			= 3,
> -	[IRQ_UARTINT0]			= 3,
> -	[IRQ_UARTINT1]			= 3,
> -	[IRQ_DM355_SPINT0_0]		= 3,
> -	[IRQ_DM355_SPINT0_1]		= 3,
> -	[IRQ_DM355_GPIO0]		= 3,
> -	[IRQ_DM355_GPIO1]		= 7,
> -	[IRQ_DM355_GPIO2]		= 4,
> -	[IRQ_DM355_GPIO3]		= 4,
> -	[IRQ_DM355_GPIO4]		= 7,
> -	[IRQ_DM355_GPIO5]		= 7,
> -	[IRQ_DM355_GPIO6]		= 7,
> -	[IRQ_DM355_GPIO7]		= 7,
> -	[IRQ_DM355_GPIO8]		= 7,
> -	[IRQ_DM355_GPIO9]		= 7,
> -	[IRQ_DM355_GPIOBNK0]		= 7,
> -	[IRQ_DM355_GPIOBNK1]		= 7,
> -	[IRQ_DM355_GPIOBNK2]		= 7,
> -	[IRQ_DM355_GPIOBNK3]		= 7,
> -	[IRQ_DM355_GPIOBNK4]		= 7,
> -	[IRQ_DM355_GPIOBNK5]		= 7,
> -	[IRQ_DM355_GPIOBNK6]		= 7,
> -	[IRQ_COMMTX]			= 7,
> -	[IRQ_COMMRX]			= 7,
> -	[IRQ_EMUINT]			= 7,
> +static u8 dm355_aintc_prios[] = {
> +	2, 6, 6, 6, 6, 6, 6, 7,
> +	6, 6, 6, 4, 4, 7, 7, 5,
> +	5, 5, 5, 7, 4, 7, 7, 7,
> +	7, 7, 7, 7, 7, 4, 2, 2,
> +	7, 7, 7, 7, 7, 3, 3, 3,
> +	3, 3, 3, 7, 4, 4, 7, 7,
> +	7, 7, 7, 7, 7, 7, 7, 7,
> +	7, 7, 7, 7, 7, 7, 0, 0,
>   };

Hmm... this makes it harder to see what is going on here.
You can no longer see which priority corresponds to which
IRQ without consulting a manual.