[PATCH 2/4] ARM: dts: imx6qdl-sabresd: add regulators control for mag3110 sensor

[Anson Huang]

The mag3110 sensor driver has supported regulators control,
assign the power supplies for mag3110 to enable the control.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 21e03b1..618f186a 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -440,6 +440,8 @@
 		pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&reg_sensors>;
+		vddio-supply = <&reg_sensors>;
 	};
 
 	light-sensor@44 {
-- 
2.7.4