Re: [PATCH V17 3/6] i2c: tegra: fix maximum transfer size
From: Dmitry Osipenko
Date: Fri Feb 08 2019 - 13:07:07 EST
08.02.2019 20:49, Sowjanya Komatineni ÐÐÑÐÑ:
> Tegra194 supports maximum 64K bytes transfer per packet.
> Tegra186 and prior supports maximum 4K bytes transfer per packet.
>
> This includes 12 bytes of packet header and this limit is
> applicable irrespective of PIO or DMA mode transfers.
>
> This patch fixes max write length to account for packet header size
> for transfers.
>
> Cc: stable@xxxxxxxxxxxxxxx
>
> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> ---
> [V16/V17] : I2C core max message size is 65536. So, max_read_len of 65535 is NOP.
> Removed it leaving max_write_len
> [V15] : This is new patch in this series.
>
>
> drivers/i2c/busses/i2c-tegra.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 3758c7a2c781..e4bf85e8dc14 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -125,6 +125,9 @@
> #define I2C_MST_FIFO_STATUS_TX_MASK 0xff0000
> #define I2C_MST_FIFO_STATUS_TX_SHIFT 16
>
> +/* Packet header size in bytes */
> +#define I2C_PACKET_HEADER_SIZE 12
> +
> /*
> * msg_end_type: The bus control which need to be send at end of transfer.
> * @MSG_END_STOP: Send stop pulse at end of transfer.
> @@ -899,12 +902,13 @@ static const struct i2c_algorithm tegra_i2c_algo = {
> /* payload size is only 12 bit */
> static const struct i2c_adapter_quirks tegra_i2c_quirks = {
> .flags = I2C_AQ_NO_ZERO_LEN,
> - .max_read_len = 4096,
> - .max_write_len = 4096,
> + .max_read_len = SZ_4K,
> + .max_write_len = SZ_4K - I2C_PACKET_HEADER_SIZE,
> };
>
> static const struct i2c_adapter_quirks tegra194_i2c_quirks = {
> .flags = I2C_AQ_NO_ZERO_LEN,
> + .max_write_len = 65535 - I2C_PACKET_HEADER_SIZE,
Ideally it should be SZ_64K - I2C_PACKET_HEADER_SIZE to not miss the one byte, otherwise good to me:
Reviewed-by: Dmitry Osipenko <digetx@xxxxxxxxx>