RE: [v5 2/2] arm64: dts: lx2160a: add sata node support

[Peng Ma]

>-----Original Message-----
>From: Shawn Guo <shawnguo@xxxxxxxxxx>
>Sent: 2019年2月1日 14:30
>To: Peng Ma <peng.ma@xxxxxxx>
>Cc: axboe@xxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; Leo Li
><leoyang.li@xxxxxxx>; linux-ide@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
>linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Andy Tang
><andy.tang@xxxxxxx>
>Subject: Re: [v5 2/2] arm64: dts: lx2160a: add sata node support
>
>On Fri, Jan 25, 2019 at 08:10:13AM +0000, Peng Ma wrote:
>> Add SATA device nodes for fsl-lx2160a and enable support for QDS and
>> RDB boards.
>>
>> Signed-off-by: Peng Ma <peng.ma@xxxxxxx>
>> ---
>> changed for V5:
>> 	- no change
>>
>>  arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts |   16 +++++++
>>  arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts |   16 +++++++
>>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi    |   44
>+++++++++++++++++++++
>>  3 files changed, 76 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
>> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
>> index 99a22ab..1a5acf6 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
>> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
>> @@ -95,6 +95,22 @@
>>  	};
>>  };
>>
>> +&sata0 {
>> +	status = "okay";
>> +};
>> +
>> +&sata1 {
>> +	status = "okay";
>> +};
>> +
>> +&sata2 {
>> +	status = "okay";
>> +};
>> +
>> +&sata3 {
>> +	status = "okay";
>> +};
>> +
>>  &uart0 {
>>  	status = "okay";
>>  };
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
>> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
>> index 6481e5f..5b6799e 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
>> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
>> @@ -102,6 +102,22 @@
>>  	};
>>  };
>>
>> +&sata0 {
>> +	status = "okay";
>> +};
>> +
>> +&sata1 {
>> +	status = "okay";
>> +};
>> +
>> +&sata2 {
>> +	status = "okay";
>> +};
>> +
>> +&sata3 {
>> +	status = "okay";
>> +};
>> +
>>  &uart0 {
>>  	status = "okay";
>>  };
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> index a79f5c1..592034b 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> @@ -671,6 +671,50 @@
>>  			status = "disabled";
>>  		};
>>
>> +		sata0: sata@3200000 {
>> +			compatible = "fsl,lx2160a-ahci";
>
>Has the kernel driver been patched to probe the compatible?
>
>Shawn
Yes, the driver patch is http://patchwork.ozlabs.org/patch/1034083/
BR
Peng
>
>> +			reg = <0x0 0x3200000 0x0 0x10000>,
>> +			      <0x7 0x100520 0x0 0x4>;
>> +			reg-names = "ahci", "sata-ecc";
>> +			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clockgen 4 3>;
>> +			dma-coherent;
>> +			status = "disabled";
>> +		};
>> +
>> +		sata1: sata@3210000 {
>> +			compatible = "fsl,lx2160a-ahci";
>> +			reg = <0x0 0x3210000 0x0 0x10000>,
>> +			      <0x7 0x100520 0x0 0x4>;
>> +			reg-names = "ahci", "sata-ecc";
>> +			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clockgen 4 3>;
>> +			dma-coherent;
>> +			status = "disabled";
>> +		};
>> +
>> +		sata2: sata@3220000 {
>> +			compatible = "fsl,lx2160a-ahci";
>> +			reg = <0x0 0x3220000 0x0 0x10000>,
>> +			      <0x7 0x100520 0x0 0x4>;
>> +			reg-names = "ahci", "sata-ecc";
>> +			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clockgen 4 3>;
>> +			dma-coherent;
>> +			status = "disabled";
>> +		};
>> +
>> +		sata3: sata@3230000 {
>> +			compatible = "fsl,lx2160a-ahci";
>> +			reg = <0x0 0x3230000 0x0 0x10000>,
>> +			      <0x7 0x100520 0x0 0x4>;
>> +			reg-names = "ahci", "sata-ecc";
>> +			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clockgen 4 3>;
>> +			dma-coherent;
>> +			status = "disabled";
>> +		};
>> +
>>  		smmu: iommu@5000000 {
>>  			compatible = "arm,mmu-500";
>>  			reg = <0 0x5000000 0 0x800000>;
>> --
>> 1.7.1
>>