[PATCH v5 4/6] clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents

[Simon Horman]

Support Z and Z2 clocks with parent frequencies greater than UINT32_MAX Hz
(~4.29GHz).

The DIV_ROUND_CLOSEST_ULL() macro accepts a 64bit dividend and 32bit
divisor. This leads to truncation of the divisor, which is the Z or Z2
parent clock frequency in HZ, on platforms where frequency of that clock is
greater than UINT32_MAX Hz.

To resolve this problem the DIV64_U64_ROUND_CLOSEST() macro, which takes
on an unsigned 64bit dividend and divisor, is used.

An earlier version of this patch made use of the existing
DIV_ROUND_CLOSEST() macro, which accepts the prevailing type of the
dividend and divisor. However, this does not compile on 32bit systems, such
as i386 and mips, when called with the types used at this call site, an
unsigned long long dividend and unsigned long divisor.

This work is in preparation for supporting the Z2 cloco on the R-Car Gen3
E3 (r8a77990) SoC which has a 4.8GHz parent clock.

Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v5: Move adding DIV64_U64_ROUND_CLOSEST to a separate patch
    Revise changelog

v4: Add and use DIV64_U64_ROUND_CLOSEST

v2: New patch
---
 drivers/clk/renesas/rcar-gen3-cpg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index 6b146c2cf6a3..4513bb705b03 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -120,8 +120,8 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 	unsigned int i;
 	u32 val, kick;
 
-	mult = DIV_ROUND_CLOSEST_ULL(rate * 32ULL * zclk->fixed_div,
-				     parent_rate);
+	mult = DIV64_U64_ROUND_CLOSEST(rate * 32ULL * zclk->fixed_div,
+				       parent_rate);
 	mult = clamp(mult, 1U, 32U);
 
 	if (readl(zclk->kick_reg) & CPG_FRQCRB_KICK)
-- 
2.11.0