[PATCH 3/3] soc: brcmstb: dpfe: use byte 3 of registers MR4-MR8

[Markus Mayer]

From: Markus Mayer <mmayer@xxxxxxxxxxxx>

For dual-rank LPDDR4, result data for any command is placed in byte 0
and byte 3 of the corresponding MR register by the firmware.
Single-rank RAM was supposed to work the same way. However, due to a
firmware bug, result values are only placed in byte 3 of the
corresponding MR register.

Since byte 3 works for single-rank and dual-rank setups, we change the
Linux driver to always use byte 3, thus returning the correct value in
either case.

Signed-off-by: Markus Mayer <mmayer@xxxxxxxxxxxx>
---
 drivers/memory/brcmstb_dpfe.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index 1095c1d95df4..fae3ac3d65c6 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -61,6 +61,7 @@
 #define DRAM_INFO_MR4		0x4
 #define DRAM_INFO_ERROR		0x8
 #define DRAM_INFO_MR4_MASK	0xff
+#define DRAM_INFO_MR4_SHIFT	24	/* We need to look at byte 3 */
 
 /* DRAM MR4 Offsets & Masks */
 #define DRAM_MR4_REFRESH	0x0	/* Refresh rate */
@@ -82,6 +83,7 @@
 #define DRAM_VENDOR_MR8		0xc
 #define DRAM_VENDOR_ERROR	0x10
 #define DRAM_VENDOR_MASK	0xff
+#define DRAM_VENDOR_SHIFT	24	/* We need to look at byte 3 */
 
 /* Reset register bits & masks */
 #define DCPU_RESET_SHIFT	0x0
@@ -582,7 +584,8 @@ static ssize_t show_refresh(struct device *dev,
 	if (!info)
 		return ret;
 
-	mr4 = readl_relaxed(info + DRAM_INFO_MR4) & DRAM_INFO_MR4_MASK;
+	mr4 = (readl_relaxed(info + DRAM_INFO_MR4) >> DRAM_INFO_MR4_SHIFT) &
+	      DRAM_INFO_MR4_MASK;
 
 	refresh = (mr4 >> DRAM_MR4_REFRESH) & DRAM_MR4_REFRESH_MASK;
 	sr_abort = (mr4 >> DRAM_MR4_SR_ABORT) & DRAM_MR4_SR_ABORT_MASK;
@@ -630,6 +633,7 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
 	struct private_data *priv;
 	void __iomem *info;
 	ssize_t ret;
+	u32 mr5, mr6, mr7, mr8, err;
 
 	priv = dev_get_drvdata(dev);
 	ret = generic_show(DPFE_CMD_GET_VENDOR, response, priv, buf);
@@ -640,13 +644,17 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
 	if (!info)
 		return ret;
 
-	return sprintf(buf, "%#x %#x %#x %#x %#x\n",
-		       readl_relaxed(info + DRAM_VENDOR_MR5) & DRAM_VENDOR_MASK,
-		       readl_relaxed(info + DRAM_VENDOR_MR6) & DRAM_VENDOR_MASK,
-		       readl_relaxed(info + DRAM_VENDOR_MR7) & DRAM_VENDOR_MASK,
-		       readl_relaxed(info + DRAM_VENDOR_MR8) & DRAM_VENDOR_MASK,
-		       readl_relaxed(info + DRAM_VENDOR_ERROR) &
-				     DRAM_VENDOR_MASK);
+	mr5 = (readl_relaxed(info + DRAM_VENDOR_MR5) >> DRAM_VENDOR_SHIFT) &
+		DRAM_VENDOR_MASK;
+	mr6 = (readl_relaxed(info + DRAM_VENDOR_MR6) >> DRAM_VENDOR_SHIFT) &
+		DRAM_VENDOR_MASK;
+	mr7 = (readl_relaxed(info + DRAM_VENDOR_MR7) >> DRAM_VENDOR_SHIFT) &
+		DRAM_VENDOR_MASK;
+	mr8 = (readl_relaxed(info + DRAM_VENDOR_MR8) >> DRAM_VENDOR_SHIFT) &
+		DRAM_VENDOR_MASK;
+	err = readl_relaxed(info + DRAM_VENDOR_ERROR) & DRAM_VENDOR_MASK;
+
+	return sprintf(buf, "%#x %#x %#x %#x %#x\n", mr5, mr6, mr7, mr8, err);
 }
 
 static int brcmstb_dpfe_resume(struct platform_device *pdev)
-- 
2.17.1