RE: [PATCH V6 1/4] dt-bindings: fsl: scu: add thermal binding

[Anson Huang]

Gental ping...

Best Regards!
Anson Huang

> -----Original Message-----
> From: Anson Huang
> Sent: 2019年2月7日 17:53
> To: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx;
> s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> catalin.marinas@xxxxxxx; will.deacon@xxxxxxx; rui.zhang@xxxxxxxxx;
> edubezval@xxxxxxxxx; daniel.lezcano@xxxxxxxxxx; Aisheng Dong
> <aisheng.dong@xxxxxxx>; ulf.hansson@xxxxxxxxxx; Daniel Baluta
> <daniel.baluta@xxxxxxx>; horms+renesas@xxxxxxxxxxxx; Andy Gross
> <andy.gross@xxxxxxxxxx>; heiko@xxxxxxxxx; arnd@xxxxxxxx;
> maxime.ripard@xxxxxxxxxxx; jagan@xxxxxxxxxxxxxxxxxxxx;
> bjorn.andersson@xxxxxxxxxx; enric.balletbo@xxxxxxxxxxxxx;
> marc.w.gonzalez@xxxxxxx; olof@xxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> pm@xxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>
> Subject: [PATCH V6 1/4] dt-bindings: fsl: scu: add thermal binding
> 
> NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system
> controller, the system controller is in charge of system power, clock and
> thermal sensors etc. management, Linux kernel has to communicate with
> system controller via MU (message unit) IPC to get temperature from thermal
> sensors, this patch adds binding doc for i.MX system controller thermal
> driver.
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> ChangeLog since V5:
> 	- add "imx,sensor-resource-id" in each thermal zone to pass resource
> ID for thermal driver.
> ---
>  .../devicetree/bindings/arm/freescale/fsl,scu.txt    | 20
> ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> index 72d481c..4b79751 100644
> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -122,6 +122,20 @@ RTC bindings based on SCU Message Protocol
> Required properties:
>  - compatible: should be "fsl,imx8qxp-sc-rtc";
> 
> +Thermal bindings based on SCU Message Protocol
> +------------------------------------------------------------
> +
> +Required properties:
> +- compatible : Must be "fsl,imx8qxp-sc-thermal";
> +- tsens-num : Total number of thermal sensors supported;
> +- #thermal-sensor-cells : Should be 1. See
> +
> Documentation/devicetree/bindings/thermal/thermal.txt
> +			  for a description.
> +- imx,sensor-resource-id : This property should be defined in each thermal
> zone
> +			   of thermal-zones node, it passes each thermal
> zone's
> +			   resource id for thermal driver to get temperature
> via
> +			   SCU IPC.
> +
>  Example (imx8qxp):
>  -------------
>  lsio_mu1: mailbox@5d1c0000 {
> @@ -168,6 +182,12 @@ firmware {
>  		rtc: rtc {
>  			compatible = "fsl,imx8qxp-sc-rtc";
>  		};
> +
> +		tsens: thermal-sensor {
> +			compatible = "fsl,imx8qxp-sc-thermal";
> +			tsens-num = <1>;
> +			#thermal-sensor-cells = <1>;
> +		};
>  	};
>  };
> 
> --
> 2.7.4