Re: [PATCH 0/4] Add nvmem support on STM32

[Fabrice Gasnier]

On 1/30/19 5:38 PM, Fabrice Gasnier wrote:
> Non volatile memory area is available on STM32. It contains various
> factory programmed information such as unique device ID, analog calibration...
> This patchset adds NVMEM support to access these data.

Hello,

Gentle reminder for this new driver review

Best Regards,
Fabrice

> 
> Fabrice Gasnier (4):
>   dt-bindings: nvmem: Add STM32 factory-programmed romem
>   nvmem: Add driver for STM32 factory-programmed read only mem
>   nvmem: stm32: add support for STM32MP15 BSEC to control OTP data
>   ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c
> 
>  .../devicetree/bindings/nvmem/st,stm32-romem.txt   |  31 ++++
>  arch/arm/boot/dts/stm32mp157c.dtsi                 |  13 ++
>  drivers/nvmem/Kconfig                              |  10 +
>  drivers/nvmem/Makefile                             |   2 +
>  drivers/nvmem/stm32-romem.c                        | 202 +++++++++++++++++++++
>  5 files changed, 258 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt
>  create mode 100644 drivers/nvmem/stm32-romem.c
>