Re: [PATCH v2 07/15] ndings: clock: milbeaut: add Milbeaut clock description

[Stephen Boyd]

The subject seems to have been cut off? "ndings"?

Quoting Sugaya Taichi (2019-02-08 04:27:03)
> diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.txt b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt
> new file mode 100644
> index 0000000..bcfc5df
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt
> @@ -0,0 +1,49 @@
> +Milbeaut SoCs Clock Controller Binding
> +----------------------------------------
> +Milbeaut SoCs Clock controller is an integrated clock controller, which
> +generates and supplies to all modules.
> +
> +This binding uses common clock bindings
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible: should be one of the following:
> +    "socionext,milbeaut-m10v-ccu" - for M10V SoC
> +- reg: shall contain base address and length of clock registers
> +- #clock-cells: shall be 1
> +- clocks: shall be an external clock
> +
> +Example: Clock controller node:
> +
> +       clk: m10v-clk-ctrl@1d021000 {
> +               compatible = "socionext,milbeaut-m10v-clk-ccu";

I thought there was some length limit on compatible string names. 32
bytes? Just barely under!