[PATCH V2 3/4] arm64: dts: freescale: imx8qxp: enable scu general irq channel

[Anson Huang]

On i.MX8QXP, SCU uses MU1 general interrupt channel #3 to notify
user for IRQs of RTC alarm, thermal alarm and WDOG etc., mailbox
RX doorbell mode is used for this function, this patch adds
support for it.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
No change since V1.
---
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 1e08387..593e2db 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -112,7 +112,8 @@
 	scu {
 		compatible = "fsl,imx-scu";
 		mbox-names = "tx0", "tx1", "tx2", "tx3",
-			     "rx0", "rx1", "rx2", "rx3";
+			     "rx0", "rx1", "rx2", "rx3",
+			     "gi3";
 		mboxes = <&lsio_mu1 0 0
 			  &lsio_mu1 0 1
 			  &lsio_mu1 0 2
@@ -120,7 +121,8 @@
 			  &lsio_mu1 1 0
 			  &lsio_mu1 1 1
 			  &lsio_mu1 1 2
-			  &lsio_mu1 1 3>;
+			  &lsio_mu1 1 3
+			  &lsio_mu1 3 3>;
 
 		clk: clock-controller {
 			compatible = "fsl,imx8qxp-clk";
-- 
2.7.4