[PATCH net-next 02/13] net: mvpp2: a port can be disabled even if we use the link IRQ

[Antoine Tenart]

We had a check in the mvpp2_mac_link_down() function (called by phylink)
to avoid disabling the port when link interrupts are used. It turned out
the interrupt can still be used with the port disabled. We can thus
remove this check.

Signed-off-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxx>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 857b079f1a29..8faa842dc17c 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -4738,13 +4738,6 @@ static void mvpp2_mac_link_down(struct net_device *dev, unsigned int mode,
 	mvpp2_egress_disable(port);
 	mvpp2_ingress_disable(port);
 
-	/* When using link interrupts to notify phylink of a MAC state change,
-	 * we do not want the port to be disabled (we want to receive further
-	 * interrupts, to be notified when the port will have a link later).
-	 */
-	if (!port->has_phy)
-		return;
-
 	mvpp2_port_disable(port);
 }
 
-- 
2.20.1