[PATCH v2 2/4] dt-bindings: clock: Add support for the MSM8998 mmcc
From: Jeffrey Hugo
Date: Sat Feb 16 2019 - 23:32:30 EST
Document the multimedia clock controller found on MSM8998
Signed-off-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/clock/qcom,mmcc.txt | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
index 8b0f7841af8d..a92f3cbc9736 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
@@ -10,11 +10,32 @@ Required properties :
"qcom,mmcc-msm8960"
"qcom,mmcc-msm8974"
"qcom,mmcc-msm8996"
+ "qcom,mmcc-msm8998"
- reg : shall contain base register location and length
- #clock-cells : shall contain 1
- #reset-cells : shall contain 1
+For MSM8998 only:
+ - clocks: a list of phandles and clock-specifier pairs,
+ one for each entry in clock-names.
+ - clock-names: "xo" for the xo clock.
+ "gpll0" for the global pll 0 clock.
+ "dsi0dsi" for the dsi0 pll dsi clock (required if dsi is
+ enabled, optional otherwise).
+ "dsi0byte" for the dsi0 pll byte clock (required if dsi
+ is enabled, optional otherwise).
+ "dsi1dsi" for the dsi1 pll dsi clock (required if dsi is
+ enabled, optional otherwise).
+ "dsi1byte" for the dsi1 pll byte clock (required if dsi
+ is enabled, optional otherwise).
+ "hdmipll" for the hdmi pll clock (required if hdmi is
+ enabled, optional otherwise).
+ "dpvco" for the displayport pll vco clock (required if
+ dp is enabled, optional otherwise).
+ "dplink" for the displayport pll link clock (required if
+ dp is enabled, optional otherwise).
+
Optional properties :
- #power-domain-cells : shall contain 1
--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.