[PATCHv3] random: Make /dev/random wait for crng_ready
From: Bernd Edlinger
Date: Sun Feb 17 2019 - 03:45:02 EST
Reading from /dev/random may return data while the getrandom
syscall is still blocking.
Those bytes are not yet cryptographically secure.
The first byte from /dev/random can have as little
as 8 bits entropy estimation. Once a read blocks, it will
block until /proc/sys/kernel/random/read_wakeup_threshold
bits are available, which is usually 64 bits, but can be
configured as low as 8 bits. A select will wake up when
at least read_wakeup_threshold bits are available.
Also when constantly reading bytes out of /dev/random
it will prevent the crng init done event forever.
Fixed by making read and select on /dev/random wait until
the crng is fully initialized and the blocking_pool is
also initialized which means that more than 128 bits of
entopy have been accumulated in the blocking_pool.
Signed-off-by: Bernd Edlinger <bernd.edlinger@xxxxxxxxxx>
---
The v3 version waits much longer than the v2 version,
since first 128 bits from the input_pool go into the
CRNG, the next 64 bits are only accounted 3/4 = 48 bits
in the blocking_pool, so we need in total 192 bits from
the input_pool until the blocking_pool is initialized
And another 64 bits until a select on /dev/random wakes up.
On a system with only interrupt_randomness, this
takes 128+192+64=384 random bits, about 6.5 minutes
from boot until /dev/random is readable.
Maybe this is taking too long, after the CRNG ready?
After the input_pool had already been initialized,
I wonder if feeding the next 64 bits from the input pool
to the empty blocking_pool could already be considered
to be good enough to derive the first random byte from
the blocking_pool?
Thanks
Bernd.
---
drivers/char/random.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 38c6d1a..666102d 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -476,6 +476,7 @@ struct entropy_store {
__u8 last_data[EXTRACT_SIZE];
};
+static void _xfer_secondary_pool(struct entropy_store *r, size_t nbytes);
static ssize_t extract_entropy(struct entropy_store *r, void *buf,
size_t nbytes, int min, int rsvd);
static ssize_t _extract_entropy(struct entropy_store *r, void *buf,
@@ -719,8 +720,16 @@ static void credit_entropy_bits(struct entropy_store *r, int nbits)
entropy_bits = r->entropy_count >> ENTROPY_SHIFT;
}
+ if (crng_ready() && !blocking_pool.initialized &&
+ entropy_bits >= random_read_wakeup_bits) {
+ _xfer_secondary_pool(&blocking_pool, entropy_bits / 8);
+ r->entropy_total = 0;
+ entropy_bits = r->entropy_count >> ENTROPY_SHIFT;
+ }
+
/* should we wake readers? */
- if (entropy_bits >= random_read_wakeup_bits &&
+ if (blocking_pool.initialized &&
+ entropy_bits >= random_read_wakeup_bits &&
wq_has_sleeper(&random_read_wait)) {
wake_up_interruptible(&random_read_wait);
kill_fasync(&fasync, SIGIO, POLL_IN);
@@ -1317,7 +1326,6 @@ void add_disk_randomness(struct gendisk *disk)
* from the primary pool to the secondary extraction pool. We make
* sure we pull enough for a 'catastrophic reseed'.
*/
-static void _xfer_secondary_pool(struct entropy_store *r, size_t nbytes);
static void xfer_secondary_pool(struct entropy_store *r, size_t nbytes)
{
if (!r->pull ||
@@ -1661,7 +1669,7 @@ void get_random_bytes(void *buf, int nbytes)
*/
int wait_for_random_bytes(void)
{
- if (likely(crng_ready()))
+ if (crng_ready())
return 0;
return wait_event_interruptible(crng_init_wait, crng_ready());
}
@@ -1851,7 +1859,9 @@ void rand_initialize_disk(struct gendisk *disk)
nbytes = min_t(size_t, nbytes, SEC_XFER_SIZE);
while (1) {
- n = extract_entropy_user(&blocking_pool, buf, nbytes);
+ n = blocking_pool.initialized
+ ? extract_entropy_user(&blocking_pool, buf, nbytes)
+ : 0;
if (n < 0)
return n;
trace_random_read(n*8, (nbytes-n)*8,
@@ -1865,6 +1875,7 @@ void rand_initialize_disk(struct gendisk *disk)
return -EAGAIN;
wait_event_interruptible(random_read_wait,
+ blocking_pool.initialized &&
ENTROPY_BITS(&input_pool) >=
random_read_wakeup_bits);
if (signal_pending(current))
@@ -1909,7 +1920,8 @@ void rand_initialize_disk(struct gendisk *disk)
poll_wait(file, &random_read_wait, wait);
poll_wait(file, &random_write_wait, wait);
mask = 0;
- if (ENTROPY_BITS(&input_pool) >= random_read_wakeup_bits)
+ if (blocking_pool.initialized &&
+ ENTROPY_BITS(&input_pool) >= random_read_wakeup_bits)
mask |= EPOLLIN | EPOLLRDNORM;
if (ENTROPY_BITS(&input_pool) < random_write_wakeup_bits)
mask |= EPOLLOUT | EPOLLWRNORM;
--
1.9.1