Re: [RFC] On the Current Troubles of Mainlining Loongson Platform Drivers
From: Alexandre Oliva
Date: Sun Feb 17 2019 - 20:38:00 EST
On Feb 17, 2019, Aaro Koskinen <aaro.koskinen@xxxxxx> wrote:
> I tested few older kernels, and it seems that the spurious IRQ issue has
> been always there after switching to libata (commit 7ff7a5b1bfff). It has
> been unnoticed as the 100000 irq limit wasn't reached during boot.
I see, thanks. That would probably make it hard to bisect indeed.
>> The kernel still disables irq14 early on, and then runs slow.
> This hack works only for CONFIG_PATA_CS5536. You are probably using PATA_AMD.
That's a reasonable guess, but I don't think so. I do have PATA_AMD
enabled as a module indeed, but it's not even loaded, much as I can
tell, whereas PATA_CS5536 is built into the kernel image, and dmesg
says:
[ 4.460000] scsi host0: pata_cs5536
[ 4.464000] scsi host1: pata_cs5536
[ 4.464000] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c60 irq 14
[ 4.464000] ata2: DUMMY
[ 4.464000] pcnet32: [...]
[ 4.644000] random: [...]
[ 5.908000] irq 14: nobody cared (try booting with the "irqpoll" option)
Just to be sure, I added some printks to cs5536_noop_freeze, and here's
what I got in dmesg instead:
[ 4.452000] pata_cs5536: freeze: checking status...
[ 4.452000] pata_cs5536: freeze: checked, clearing...
[ 4.452000] pata_cs5536: freeze: cleared
[ 4.460000] scsi host0: pata_cs5536
[ 4.464000] scsi host1: pata_cs5536
[ 4.464000] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c60 irq 14
[ 4.464000] ata2: DUMMY
[ 4.464000] pcnet32: [...]
[ 4.468000] pata_cs5536: freeze: checking status...
[ 4.468000] pata_cs5536: freeze: checked, clearing...
[ 4.468000] pata_cs5536: freeze: cleared
[ 4.652000] random: [...]
[ 5.920000] irq 14: nobody cared (try booting with the "irqpoll" option)
now, maybe I just don't understand what effects the patch was supposed
to have.
The system still feels very slow, but I haven't timed anything; could it
be that it had the effect of keeping the IRQ functional after all, but
5.0-rc6 is slower than earlier kernels for other reasons? Like,
/proc/irq/14/pata_cs5536/ is there, but I haven't checked whether it was
there before the patch.
Do you suggest any way to tell whether it had the intended effect?
--
Alexandre Oliva, freedom fighter https://FSFLA.org/blogs/lxo
Be the change, be Free! FSF Latin America board member
GNU Toolchain Engineer Free Software Evangelist
Hay que enGNUrecerse, pero sin perder la terGNUra jamÃs-GNUChe