Re: [PATCH v2 04/10] usb: dwc3: Add two quirks for Hisilicon Kirin Soc Platform
From: Chen Yu
Date: Mon Feb 18 2019 - 07:32:11 EST
Hi,
On 2019/2/18 20:21, Andy Shevchenko wrote:
> On Mon, Feb 18, 2019 at 1:23 PM Yu Chen <chenyu56@xxxxxxxxxx> wrote:
>>
>> There are tow quirks for DesignWare USB3 DRD Core of Hisilicon Kirin Soc.
>> 1)SPLIT_BOUNDARY_DISABLE should be set for Host mode
>> 2)A GCTL soft reset should be executed when switch mode
>
> Thus, it must be two patches, no?
>
>> +static void dwc3_gctl_core_soft_reset(struct dwc3 *dwc)
>> +{
>> + u32 reg;
>> +
>> + reg = dwc3_readl(dwc->regs, DWC3_GCTL);
>
>> + reg |= (DWC3_GCTL_CORESOFTRESET);
>
> Redundant parens.
>
>> + dwc3_writel(dwc->regs, DWC3_GCTL, reg);
>> +
>> + reg = dwc3_readl(dwc->regs, DWC3_GCTL);
>
>> + reg &= ~(DWC3_GCTL_CORESOFTRESET);
>
> Ditto.
>
>> + dwc3_writel(dwc->regs, DWC3_GCTL, reg);
>> +}
>
>> +static void dwc3_complete(struct device *dev)
>> +{
>
>> + struct dwc3 *dwc = dev_get_drvdata(dev);
>> + u32 reg;
>
> Indentation style is different to the other functions in the same patch.
> Use simple space here.
>
>> + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
>> + dwc->dis_split_quirk) {
>> + dev_dbg(dwc->dev, "set DWC3_GUCTL3_SPLITDISABLE\n");
>> + reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
>> + reg |= DWC3_GUCTL3_SPLITDISABLE;
>> + dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
>> + }
>> +}
>
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -269,7 +269,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
>> {
>> const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
>> struct dwc3 *dwc = dep->dwc;
>
>> - u32 timeout = 1000;
>> + u32 timeout = 5000;
>
> I don't see anything about this change in commit message. Moreoever,
> it looks like it must be a separate logical change with its own
> description.
>
>> u32 saved_config = 0;
>> u32 reg;
>
>
I will separate these changes into different patches. Thanks!